MGED CMD rotobj
From BRL-CAD
Revision as of 08:28, 18 August 2008 by Dloman (talk | contribs) (New page: Category:MGED =rotobj= __TOC__ ==Syntax== :rotobj [-i] x y z ==Argument(s)== : '''[-i]''' :: Optional. Treat supplied values as increments, not absolutes. : '''x''' :: X axis rot...)
rotobj
Contents
Syntax
- rotobj [-i] x y z
Argument(s)
- [-i]
- Optional. Treat supplied values as increments, not absolutes.
- x
- X axis rotation, in degrees.
- y
- Y axis rotation, in degrees.
- z
- Z axis rotation, in degrees.
Return Value(s)
- No Return Values for this command.
Description
The "rotobj" command rotates the currently edited object by z angle degrees about the z direction, y angle about the y direction, and x angle degrees about the x direction in that order. If an -i option is included, then the rotations are treated as increments to the previous rotations. MGED must be in the matrix edit mode for this command to be useful. The p command provides a similar capability for primitive editing.
Example(s)
- mged> rotobj 0 0 25
- Rotate the currently edited object by 25 degrees about the z direction from the original orientation
See Also
Page Generated by David Loman on: 10/11/2007 at: 2:04:45 PM
