Google Summer of Code/Project Ideas

The list of possible projects below should serve as a good starting point for new developers that would like to get involved in working on BRL-CAD. The ideas below range from the very hard and math intense to the very easy, see the link to each for more details. You are also welcome to scale the scope of the project up or down as needed as the ideas suggested below are merely starting points. There are also several other areas of development that are of high-interest.

BRL-CAD Priorities

Be sure to read up on our application process for getting started with your proposal submission if you have not done so already including our checklist. See the diagram at the bottom of this page for an overview of our major project focus areas.

Project Categories

NURBS (Non-Uniform Rational B-Splines) Projects

BRL-CAD has recently implemented raytracing support for NURBS-based boundary representation geometry. It's one of our hot-topic priority focus areas with high impact and high visibility. They are also pretty hard so be careful to have sufficient familiarity and lots of milestones.

Idea	Languages	Impact	Difficulty
NURBS Intersections: Evaluate the intersection of two NURBS surfaces. You'll get a 3D curve or a point, line segment, or even a plane depending how the surfaces overlap.	C/C++	HUGE	HARD
NURBS Tessellation: Given a NURBS object (i.e., a collection of NURBS surfaces that enclose space), evaluate a polygonal mesh. It has to be fast.	C/C++	HUGE	MEDIUM
Implicit to NURBS conversion: We implement lots of primitives like sphere and torus defined with implicit parameters. Given one of our implicit primitives, describe it using NURBS surfaces.	C/C++	HUGE	MEDIUM
Plate Mode NURBS raytracing: Imported NURBS geometry often does NOT enclose space (i.e., not solid), so add support for specifying an implicit thickness.	C/C++	HUGE	HARD

Code Refactoring Projects

BRL-CAD has more than a million lines of code so we have to continually refactor and clean up code for maintainability. Cruft happens. These projects help reduce the complexity and make things better. They're not very hard at all, but exceedingly valuable to our project vitality.

Idea	Languages	Impact	Difficulty
Code Reduction: BRL-CAD is more than 1M lines of code. Approximately 10% of that is duplication. Help reduce that percentage.	C	BIG	EASY
MGED to Archer Command Migration: Our next-generation editor (Archer) needs to have the same (700+) commands that are in MGED. Help make our next CAD interface awesome.	C and Tcl	HUGE	EASY
General Tree Walker: We have a half dozen or more functions that will traverse a geometry hierarchy in different ways. There only needs to be one.	C	HUGE	EASY
Rework of libbu/libbn to not require Tcl: Tcl's C API is used throughout BRL-CAD providing great abstractions, but we want our basic utility and numeric libraries (LIBBU & LIBBN) to stand alone.	C	HUGE	EASY
Consolidate image processing: We have 100+ image processing tools that independently read and write file data. Needs much reuse love.	C	HUGE	EASY
Fix Bugs: We take pride in our breadth of functionality and time-tested stability. We still have bugs. Identify some and fix 'em!	C	DEPENDS	EASY

Graphical User Interface (GUI) Projects

The primary environment in which users interact with BRL-CAD geometry is the MGED geometry editor. The "next generation" interface for MGED, dubbed Archer, has been under development for some time but there is a lot of functionality that still needs to be migrated and new features needed by MGED, Archer, or both.

Idea	Languages	Impact	Difficulty
New Cross-Platform 3D Display Manager: BRL-CAD uses display managers for visualizing 3D geometry in a window. We want one that uses a cross-platform toolkit such as Qt or OGRE.	C/C++	HUGE	MEDIUM
New Cross-Platform 2D Framebuffer: BRL-CAD uses framebuffers to display 2D imagery. The merits of having a single interface for most platforms is self-evident.	C/C++	HUGE	EASY
2D Sketch Editor: MGED has a sucky 2D sketch editor written in pure Tcl/Tk. Archer has nothing. Fix the old one or write a new one.	Tcl (presently) and/or C	HUGE	HARD
Ayam Editor Feature Integration: The Ayam project has support for NURBS editing, we do not. Collaboration and reuse is a good thing.	C/Tcl	BIG	MEDIUM
GUI Integration of Analysis Tools: There are a lot of visualization tools in BRL-CAD, but most aren't integrated with the GUI. Visualizing directly within the GUI would improve usability.	C	BIG	MEDIUM
Level of Detail Wireframes: Geometry is drawn with fixed wireframe detail which can screw performance and make shape recognition difficult. Detail needs to adjust based on view size.	C	HUGE	EASY
BoT Editing: Our unstructured triangle mesh geometry (Bag of Triangles = BoT) is a common import format, but our BoT edit support sucks. We need something better.	C	HUGE	HARD
NMG Editing: Our structured polygonal mesh geometry (N-Manifold Geometry = NMG) is a common export format, but our NMG edit support is non-existent. We need something.	C	HUGE	HARD
Visualizing Constructive Solid Geometry (CSG): CSG forms a directed acyclic graph. Tree view widgets show a simple hierarchical representation, but we need something better.	C/C++	HUGE	EASY

Geometry Conversion Projects

When it comes to geometry conversion, STEP and IGES are the priority. STEP is an absurdly complicated format, but we're one of the first open source projects to implement a working importer. IGES is a much older standard, but more time-tested too. Both have a variety of potential high-priority projects associated with the.

Idea	Languages	Impact	Difficulty
STEP Libraries: We took over the NIST STEP Class Library (SCL) project during our development of our g-step exporter. It needs a lot of cleanup.	C/C++	HUGE	EASY
STEP exporter: We have an importer, we need a comprehensive exporter with support for implicit CSG, NURBS, or polygonal mesh geometry.	C/C++	HUGE	EASY
STEP importer improvements: We have an importer, but it's preliminary. Add support for importing hierarchy information, polygonal geometry, and implicit geometry.	C/C++	HUGE	MEDIUM
IGES import improvements: We have extensive support for the International Geometry Exchange Standard (IGES) with our g-iges and iges-g converters, but they need updating.	C	HUGE	MEDIUM
Geometry Conversion Library: Probably our biggest open source asset is our extensive collection of importers and exporters. Turn them all into a universal conversion library.	C/C++	HUGE	EASY
Voxelize command: Convert geometry into voxel data sets by shooting a grid of rays. The finite element analysis and volumetric rendering folks will love you.	C	BIG	EASY

Geometry Processing Projects

Idea	Languages	Impact	Difficulty
GED Transactions: Migrating functionality from our MGED geometry editor into our LIBGED library provided excellent code reuse, but now we need transactions so that actions can be undone.	C	HUGE	EASY
Add exec option to search: Our LIBGED library provides a search command very similar to the UNIX find command for scanning through geometry. Implement the -exec option.	C	HUGE	EASY
Geometry Selection Functionality: Implement a new selection command that lets you temporarily group objects based on spatial, attribute, or geometric properties.	C	HUGE	EASY
Geometric Constraint Solver: Our LIBPC parametric constraint library is the work-in-progress foundation of being able to validate and describe geometry relationships.	C/C++	HUGE	HARD
Space Partitioning for Tessellation: Technically an optimization task, make our geometry converters run an order of magnitude faster by using spatial partitioning during tessellation.	C	BIG	HARD
libsvn within Geometry Database Format: Our Geometry Service project provides comprehensive edit history by using a revision control system. Hook our .g database on the backend ftw.	C	HUGE	HARD
Overlap tool: Resolving geometric interferences (aka overlaps) is a common geometry editing activity. Design an awesome interface for resolving conflicts.	Tcl	HUGE	EASY

Rendering & Analysis Projects

Idea	Languages	Impact	Difficulty
Shader Enhancements: We have a functioning custom shader system in BRL-CAD, but there are now folks that specialize and there's lot of room for improvements.	C	BIG	EASY
Material and Shader Objects: This one is a biggie but easy. Implement new object entities for describing shaders and material properties, use them during ray tracing.	C	HUGE	EASY
NMG Raytracing Performance Improvement: BRL-CAD's structured mesh geometry (N-Manifold Geometry = NMG) needs some time in a profiler. Malloc during raytracing is bad.	C	BIG	HARD
Generalized abstracted spacial partitioning capability: Need more be said? If you're familiar with BSPs, KD trees, and grid structures, then this one is for you.	C	HUGE	HARD
High Dynamic Range Support: We don't have displays supporting this yet, but that's never stopped us before. Implement support for images with more than 8-bits per channel.	C and/or C++	BIG	EASY
Vector output from raytracing: Huge impact here if you can update one or more of our raytracers to provide vector output instead of raster. Perhaps render directly to PDF or SVG.	C and/or C++	HUGE	EASY
Analysis Library: There are various tools in BRL-CAD for calculating weights, moments of inertia, and more. They're stand-alone applications. Turn them into a library.	C	HUGE	HARD

Web Development Projects

We're generally less interested in web development projects because the developer rarely sticks around after development is over. We're not interested in web code, we're interested in people. If you're willing to work on your project long after GSoC is over (i.e., joining the project) and are willing to make a long-term commitment to BRL-CAD, then we welcome your web development project idea.

Idea	Languages	Impact	Difficulty
Benchmark Performance Database: BRL-CAD's Benchmark has been used for two decades to compare performance across configurations. Build a database website.	Depends	BIG	MEDIUM
Materials Database: Create a Materials Database web site for collecting, managing, and providing programmatic interfaces to material properties.	Depends	BIG	MEDIUM

Other Tool Projects

Some of these project ideas aren't as detailed or elaborate as the ones above, but would be interesting and useful nonetheless. Please discuss with us before proposing one of these ideas.

• Automated exploded view tool (C/C++/Tcl)
• Automated cutaway view tool (C/C++/Tcl)
• Converter completion so all current formats have both import and export (C)
• GUI Animation editor/creator (C/Tcl)
• Blender file format converter (C)

<AN IDEA OF YOUR OWN>

Do you have an idea of your own? Let us know and maybe we'll like it too. We're very open to new ideas, areas of academic research, industry applications, and any other ways that may help get you hooked on BRL-CAD development. Just remember that BRL-CAD is a solid modeling CAD suite so keep that in mind when scoping your project.

Requirements:

• Passion for the task being suggested
• Buy-in from one of the existing developers

Mentors

BRL-CAD operates under group mentorship. That means you can contact anyone, not just the person assigned to you, for assistance. The mailing list and IRC channel are the preferred communication methods.

• Christopher Sean Morrison
  • brlcad on irc.freenode.net
  • Org admin, core dev, open source project lead

• Erik Greenwald
  • ``Erik on irc.freenode.net
  • Org admin, core dev

• Cliff Yapp
  • starseeker on irc.freenode.net
  • Mentor, core dev

• Ed Davisson
  • brlcad-devel mailing list
  • Part-time mentor, Math guru extraordinaire

• Dave Loman
  • dloman on irc.freenode.net
  • Mentor, expert modeler

• Daniel Rossberg
  • d_rossberg on irc.freenode.net
  • Mentor, core dev, math expert

• Keith Bowman
  • brlcad-devel mailing list
  • Part-time mentor, core dev, NURBS guru

• Tom Browder
  • brlcad-devel maling list
  • Part-time mentor

• Richard Weiss
  • brlcad-devel mailing list
  • Part-time mentor