- 1 Personal Information
- 2 Project Information
- 3 Detailed Project Description
- 4 Deliverables
- 5 Development schedule
- 6 Time availability
- 7 Why BRL-CAD?
- 8 Why me ?
NAME : Check Nyah Watad Wallah
I am a freshman Computer Engineering Student at the University of Buea, South West Region,Cameroon. After wining the 1st prize for Programming among the freshman year students at my university. I have founded a programmers club to help develop the coding skills among members of my university community
Languages: C(Very Good), Java(learning/Intermediate), C++(learning/basic)
Wrote over a thousand lines of c code to increase performance of a sorted online dictionary used by French speaking students in our University using a redblack tree.
Implemented a fibonnacci heap to demonstrate how it can increase performance of the Dijkstra's algorithm used in solving the single-source shortest path problem used in graph search.
Currently working on a Medical app to be integrated into the university website to determine the body mass Index of students in relation to the Health Awareness Initiative of the University.
MATRIX PULL ROUTINE FOR PERFORMING THE OPPOSITE OF THE MATRIX
PUSH ON GEOMETRY.
Brief Project summary
The pull routine takes a specific node on a CSG tree, walking down to the primitive shapes restoring the geometric transformations(scaling, translation or rotations) at each stage down the CSG tree traversal based on reversing all the geometric transformations that occured on the primitive shapes located at the leaf. Pull routine also stores the local coordinate systems ate each point during the traversal from the primitives up to the given initial node. All transformation matrices visited along the tree will be set to their original tranformation matrices. This command will fail if no changes occured to the primitive shapes at the leaves of the csg tree.
Detailed Project Description
The Pull/unpush command/routine is a high priority project for BRL-CAD. The pull command seeks to restore the original state of the csg tree from any particular node after the push command has been executed. However, the Push command is used to walk the geometry tree from a specified head node to the leaf nodes(primitive level), collecting the matrix transformations such as (translations, rotations or scales) applied to new assemblies using matrix edits(oed command). The push then applies the matrix transformation parameters to the primitives, eliminationg the need for storing the various matrix transformations thereby setting them to identity matrices. This process however looses any local coorrdinate system used in constructing the geometric objects. The pull routine seeks to restore the original tree state by reversing any tranformation operations performed on the primitive shapes from a designated top node on the csg tree. Here, I would like to show my detailed proposal in solving this summer's project. My code patch will have a sample routine that takes as argument a designated node(such as a primitive) and performs the Inverse of any rotation, Inverse of any translation and the inverse of a scale.) and performs the matrix inverse the primitive matrix.
The Working of the Pull Routine
Syntax pull <objects>
arguments <objects> valid brlcad objects currently in database.
The Pull routine takes as arguments a valid object, moves down the tree and performs an inverse rotation which is stored in a list, inverse scale and inverse translation which is stored on the list and transforms the primitive object by the Inverse transformations and recursively inserts the original matrix transformations on the tree as it moves up from the primitive
Matrix Transformations BRL-CAD uses three main transformations on objects stored in a 4x4 matrix defined by 'mat_t' data type Assuming the 4x4 matrix is represented as shown below [0 ][ 1][ 2][ 3] [4 ][ 5][ 6][ 7] [ 8][9 ] 
The rotation operation is represented by the 3x3 matrix [0 ][ 1][2 ] [3 ][ 4][ 5] [6 ][ 7][ 8]
The scale transformation is represented by the diagonal matrix [ 8] or  0 0 0 0  0 0 0 0  0 0 0 0 1
The translation transformation is represented by 1 0 0  0 1 0  0 0 1  0 0 0 1 However, the various geometric transformations will be separated into different column matrices by the det_matrix() routine explained below.
The Inverse of the various transformations will be computed by the routine
/**************************************************************** void InverseTransform(mat_t transf); shown in the code patch
********** or *************** a preprocessor directive #define InverseTransform(transf) //so as to increase speed of execution. **************************************************************************/
The Mathematics of the Inverse Transformation
Inverse Rotation: In Euclidean geometry, a rotation is an example of an isometry, a transformation that moves points without changing the distances between them. Rotations are distinguished from other isometries by two additional properties: they leave (at least) one point fixed, and they leave "handedness" unchanged. Since BLR-CAD represents a rotation by the 3x3 matrix, an Inverse of a rotation would be the transpose of the 3x3 matrix so if RotA(3x3 rotation), Inverse(RotA) = Transpose(RotA).
Inverse Scale: Scaling transformations stretch or shrink a given coordinate system and as a result change lengths and angles. So, scaling is not an Euclidean transformation. The meaning of scaling is making the new scale of a coordinate direction p times larger. In other words, the x coordinate is "enlarged" p times. This requirement satisfies x' = p x and therefore x = x'/p. Scaling can be applied to all axes, each with a different scaling factor. For example, if the x-, y- and z-axis are scaled with scaling factors p, q and r, respectively, the inverse transformation matrix is: Inv(SclA) = 1/p 0 0 0 1/q 0 0 0 1/r
Inverse Translation: A translation is an affine transformation with no fixed points. Matrix multiplications always have the origin as a fixed point. Nevertheless, there is a common workaround using homogeneous coordinates to represent a translation of a vector space with matrix multiplication: Write the 3-dimensional vector w = (wx, wy, wz) using 4 homogeneous coordinates as w = (wx, wy, wz, 1). so the Inverse of a translation simply reverses the direction of the vector or matrix if TrnA = (a, b ,c , d) Inverse(TrnA) = (-a, -b, -c, -d)
The Inverse of the Transformation
The key point mathematically is the reversibility of the transformations.
For 3D, the typical transformation is
[ new_x ] [ Xx Xy Xz Tx ] [ x ] [ new_y ] = [ Yx Yy Yz Ty ] [ y ] [ new_z ] [ Zx Zy Zz Tz ] [ z ] [ 1 ] [ 0 0 0 1 ] [ 1 ]
which is usually written as
v = M p
where v is the transformed vector, p the original vector, and M the transformation matrix (that includes rotation, scaling, and moving).
Because the matrix is formed as a 4-by-4 matrix as above, transformations can be combined via matrix multiplication (new matrix on the left side):
Mcombined = Mlater Mearlier
Because each transformation is reversible, there is also an inverse matrix
M` M = I.
Thus, starting at a leaf in the object tree, the current transformation matrix on the left is multiplied with the new transformation matrix, to obtain the one that applies to the current object). The transformations are cumulative from the root to the leaf.
Reversing the matrix M is very simple (Xx' means transformed Xx component of the matrix, and so on):
D = Determinant(M) = Zz Xx Yy - Zz Yx Xy - Zx Xz Yy - Zy Xx Yz + Zy Yx Xz+ Zx Xy Yz
Xx' = (Yy Zz - Zy Yz) / D Xy' = (Zy Xz - Xy Zz) / D Xz' = (Xy Yz - Yy Xz) / D Tx' = ( -Xy Yz Tz + Xy Zz Ty + Xz Tz Yy - Xz Zy Ty - Tx Yy Zz + Tx Zy Yz) / D Yx' = (-Yx Zz + Zx Yz) / D Yy' = (Zz Xx - Zx Xz) / D Yz' = (-Yz Xx + Yx Xz) / D Ty' = (Xx Yz Tz - Xx Zz Ty + Ty Zx Xz - Yz Zx Tx - Yx Xz Tz + Yx Tx Zz) / D Zx' = (Yx Zy - Zx Yy) / D Zy' = (-Zy Xx + Zx Xy) / D Zz' = (Yy Xx - Yx Xy) / D Tz' = (-Tz Xx Yy + Tz Yx Xy + Zx Tx Yy + Zy Xx Ty - Zy Yx Tx - Zx Xy Ty) / D
So When the cummulative matrix is stored for each object,and its inverse any matrix transformation can be applied in the object coordinates. This is simply done by multiplying the transformation with the object coordinates for any object; which then gives the transformation in the root coordinate system. When this is then applied to the left with each of the transformation matrices, the original transformation matrix is obtained in local object coordinates / transformations.
Overall Structure Pull routine
The pull routine works down a tree from the node pushing the directory pointers to a linked list and when it reaches the leaf, it copies the transformation matrix performs an inverse transformation on the leaf restoring it back to its initial form and moves back up the tree restoring the original tranformation matrices using the directory pointers which also stores the local coordinates.
However,brlcad already has the functionality for performing matrix operations on objects as in(src/libged/push.c, xpush.c). I will use the InverseTransf() as a subroutine in the pull operation and simply use the MAT_COPY directive to copy the various 4x4 original matrix transformations to the corresponding node up the tree from the leaf. after the various matrix transformations have been copied from the matrix stored at the leaf node.
So, here is a summary of the pull command
*. pull_obj -create a structure to hold the original matrix and corresponding local coordinate systems while calling inverse_tranf(). *. det_trans()create a routine to copy the different matrix transformations performed on the primitive; which will then be given to InverseTransf() as an argument. *. create a loop to move down the tree to the leaf and then recursively move up restoring the original matrix transformations. *. pull leaf() routine : which runs in parallel restoring the original primitive state and copies the matrix transformation which then calls the det_transf() routine to seperate the different matrix tranformations. *. mat_restore() routine: which restores the original matrix transformation and coordinate system at each node.
The det_trans() routine
This takes the primitives transformation matrix and separates the various types of matrix transformations from it before passing the results to calling function. This routine returns an array of three 4x4 matrices having the scale, rotation and translation transformations.It returns 1 upon success and 0 otherwise.
=== The inverse_transf() routine ===: This routine takes any of matrix transformations determined by the det_trans() routine and determines the inverse of the transformation which will then applies to the primitive to restore its original state. It stores the results on the pull_obj structure will will then be applied to the primitive object to restore its original state.
The mat_restore() routine
This routine takes the directory arguments and corresponding transformation matrices from pull_obj structure and restores the original matrix tranformation of nodes in a particular tree.
The pull_leaf() routine
This routine applies an inverse transformation a primitive object restoring the original state or dimensions of the primitive object. returns truthfully if the object has been restored to its original state.
Tests and Verification
I believe test driven development would be key in finding and fixing problems with the pull routine and then with more tests to ensure the code functions correctly and its bulletproof to all forms of object inputs. This will be enhanced with the creation of a special regression test for the pull command to avoid modification of unwanted nodes/objects.Also, this command will be included among the MGED commands and a well written manual will be made so support the usage of the command.
 CodePatch(Sample linked list that holds the matrices and inverses and corresponding directories together with the sample implementation of the Inverse of a transformation function) Link: https://sourceforge.net/p/brlcad/patches/169/
 Geometric Transformations and Inverses: https://www.cs.mtu.edu/~shene/COURSES/cs3621/.../geometry/geo-tran
Implementation of the inverse_tranf(), mat_restore(), det_transf() routines and other pull subroutines.
Implementation of the complete pull routine with further testing.:(pull_leaf())
Integration of the Pull routine into MGED command interface together with Documentation containing(summary together with usage capabilities)
July 1st (~ 3 weeks)
Study of BRLCAD Manuals and other Documentation on the Push Command
Discuss with other developers concerning implementation details.
Study the (src/libged , /include ) libraries and the implementation of push/xpush commands.
Discuss more coding specifications and implementations details with mentor/other developers
July 21 - July 28 (1 week)
Implementation of the det_trans() and InverseTransf() routines with determination of original matrix transformations.
Tests on sample primitive matrices
July 29 - Aug 17(3 weeks)
Implementation of do_restore() routine(1 week) which traverses nodes restoring the original matrix and tests
Implementation of pull routine(pull_leaf() and others)(2 weeks)
Testing and functionality verification of function.
Mid-term evaluation in July 29 - Aug. 2
Aug. 18 - Aug. 31 (2 weeks)
Finalization of complete pull routine
Tests Tests of the final pull routine on primitives
Sept 01 - Sept 14( 2 weeks)
Integration of Pull into MGED command interface.
Testing of functionality of command and debuggging
Sept 15 - Sept 21(1 week)
Tests Fix bugs and improve performance of routine
Documentation and code clean up
Sept 23 - Sept 27(1 week)
Final Evaluation Submission of Final code to Google.
I would be able to offer over 40 hours on the project. However, Our Second Semester ends late june or early july and our next semester begins in early October. However, if the semester extends to early july it will be for completion of exams so i would dedicate most of my evenings and weekend in the first week of July to start work on studies of the brlcad documentation and libraries.
From the day i read the Document "How to become a Computer Hacker" by Eric S. Raymond, I started coding very seriously and praying for the day i would become a true hacker by contributing code to the opensource community. I believe working with brlcad this year will give the joy of working on my first real opensource project. I will really cherish the experience of having contributed code to a great organizaton like BRLCAD.
Why me ?
I believe having won the prize as the best computer programmer in my freshman class at my university I would be capable of contributing software to brlcad and the opensource commmunity. I see this brlcad project as a challenge to gain both the respect of brlcad geeks and other great programmers which would give me additional confidence in climbing the ladder of hackerdom. I pray that you give me this great opportunity to greatly impact humanity and the world using software.