Difference between revisions of "Google Season of Docs/Project Ideas"

From BRL-CAD
(Convert unmanaged docs to managed)
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
If you want to work on '''computer-aided design (CAD), geometry, or graphics''' documentation, you've come to the right place!  Please check out our project ideas below.  Here are some links to help you get started with a proposal:
+
If you want to work on '''computer-aided design (CAD), geometry, or graphics''' documentation, you've come to the right place!  Please check out our project ideas below.  They are roughly in order or priority and difficulty.  Here are some links to help you get started with a proposal:
  
 
# [https://brlcad.org/wiki/Compiling Get BRL-CAD source code]
 
# [https://brlcad.org/wiki/Compiling Get BRL-CAD source code]
Line 10: Line 10:
 
Remember that project descriptions are just ''rough ideas''.  You must expand with [[Summer_of_Code/Application_Guidelines|considerably more detail]].  Set goals that fit your experience and interest.
 
Remember that project descriptions are just ''rough ideas''.  You must expand with [[Summer_of_Code/Application_Guidelines|considerably more detail]].  Set goals that fit your experience and interest.
  
 +
<!--
 +
= Write an "Introduction to BRL-CAD" =
  
= Write an Introduction to BRL-CAD =
+
{|bgcolor=#fff
 
 
{| bgcolor=#fff
 
 
!
 
!
 
!align=center|Technologies
 
!align=center|Technologies
Line 24: Line 24:
 
* http://brlcad.org/d/about
 
* http://brlcad.org/d/about
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
|width=18%|Docbook XML
+
|width=18% align=center bgcolor=#eee|Docbook XML
 
|width=10% align=center|Easy
 
|width=10% align=center|Easy
|width=10% align=center|morrison, rossberg
+
|width=10% align=center bgcolor=#eee|morrison, rossberg
 +
|}
 +
-->
 +
 
 +
 
 +
= Upgrade doc infrastructure =
 +
 
 +
{| bgcolor=#fff
 +
!
 +
!align=center|Technologies
 +
!align=center|Difficulty
 +
!align=center|Contacts
 +
|-
 +
|width=62%|BRL-CAD has extensive documentation infrastructure using Docbook XML whereby we "compile" them into HTML, PDF, and other formats.  This approach helps ensure docs remain up-to-date, without syntax/structure errors, and allows the documentation to be composed and reused in different ways (e.g., an tutorial on some topic might get embedded as an appendix in one document or a chapter to another).  That said, the underlying format is tedious to write and hard for contributors.  We'd like to migrate to a newer system like [https://antora.org Antora] or [https://docusaurus.io Docusaurus] or [https://www.mkdocs.org MkDocs], converting everything over while still retaining build system integration.
 +
References:
 +
* see doc/docbook in a source checkout
 +
* http://brlcad.org/HACKING_BRL-CAD.pdf
 +
* https://docbook.org
 +
* https://antora.org
 +
|width=18% align=center bgcolor=#eee|Docbook XML, AsciiDoc, Markdown, Antora
 +
|width=10% align=center|Medium
 +
|width=10% align=center bgcolor=#eee|morrison, rossberg, yapp
 
|}
 
|}
  
= Organize all existing BRL-CAD documentation =
+
= Organize all existing user docs =
  
 
{| bgcolor=#fff
 
{| bgcolor=#fff
Line 37: Line 58:
 
!align=center|Contacts
 
!align=center|Contacts
 
|-
 
|-
|width=62%|Tame the beast.  BRL-CAD has more than a million words of documentation spread across hundreds of documents.  Some are huge, some are small.  There are books, articles, presentations, manual pages, diagrams, reference cards, and more in a variety of formats and locations.  The goal of this task to to conduct a complete audit of all existing documentation, categorize and organize documentation, make recommendations and/or facilitate with merging overlapping documentation, and present all available documentation in a new web index.
+
|width=62%|Tame the beast.  BRL-CAD has more than a million words of documentation spread across hundreds of documents.  Some are huge, some are small.  There are books, articles, presentations, manual pages, diagrams, reference cards, and more in a variety of formats and locations.  The goal of this task to to conduct a complete audit of all existing documentation, catalog them, make recommendations and/or facilitate with merging overlapping documentation, and present all available documentation in a new web index.
 
References:
 
References:
 
* see doc/ hierarchy in a Subversion checkout
 
* see doc/ hierarchy in a Subversion checkout
Line 44: Line 65:
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
  
|width=18%|Mediawiki, Docbook XML, Subversion
+
|width=18% align=center bgcolor=#eee|Mediawiki, Docbook XML, Subversion
|width=10% align=center|Medium
+
|width=10% align=center|Easy
|width=10% align=center|yapp, morrison, rossberg
+
|width=10% align=center bgcolor=#eee|yapp, morrison, rossberg
 
|}
 
|}
  
= Write a BRL-CAD Primitives manual =
+
= Write a "BRL-CAD Primitives" manual =
  
 
{| bgcolor=#fff
 
{| bgcolor=#fff
Line 63: Line 84:
 
* https://brlcad.org/w/images/c/cf/Introduction_to_MGED.pdf
 
* https://brlcad.org/w/images/c/cf/Introduction_to_MGED.pdf
 
* http://brlcad.org/tmp/primitives/
 
* http://brlcad.org/tmp/primitives/
|width=18%|Docbook XML, Subversion, C/C++
+
|width=18% align=center bgcolor=#eee|Docbook XML, Subversion, basic reading of C/C++
 
|width=10% align=center|Hard
 
|width=10% align=center|Hard
|width=10% align=center|morrison, rossberg
+
|width=10% align=center bgcolor=#eee|morrison, rossberg
 
|}
 
|}
  
= Upgrade doc infrastructure =
+
= Organize and publish developer docs =
  
 
{| bgcolor=#fff
 
{| bgcolor=#fff
Line 76: Line 97:
 
!align=center|Contacts
 
!align=center|Contacts
 
|-
 
|-
|width=62%|BRL-CAD has extensive documentation infrastructure using Docbook XML whereby we "compile" them into HTML, PDF, and other formatsThis approach helps ensure docs remain up-to-date, without syntax/structure errors, and allows the documentation to be composed and reused in different ways (e.g., an tutorial on some topic might get embedded as an appendix in one document or a chapter to another)That said, the underlying format is tedious to write and hard for contributorsWe'd like to migrate to a newer system like [https://docusaurus.io Docusaurus] or [https://antora.org Antora], converting everything over while still retaining build system integration.
+
|width=62%|BRL-CAD uses [http://www.doxygen.nl Doxygen] for API documentation.  It's a simple way for developers to document API by merely adding /** comments like this */ to their code, typically before a functionThe primary goal of this project is to make sure all of the public API has a Doxygen comment, has parameters tagged appropriately, grouped accordingly, and that all groupings are documented as wellThe secondary goal is to then publish the output from Doxygen to our website in HTML and PDF forms so that reference documentation is available to everyone.
 
References:
 
References:
* see doc/docbook in a source checkout
+
* see misc/doxygen in a source checkout
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
 
* http://brlcad.org/HACKING_BRL-CAD.pdf
* https://docbook.org
+
* http://www.doxygen.nl
* https://docusaurus.io
+
|width=18% align=center bgcolor=#eee|Doxygen, Subversion, C/C++ code comments
|width=18%|Docbook XML, Markdown, Subversion, Docusaurus
+
|width=10% align=center|Medium
 +
|width=10% align=center bgcolor=#eee|yapp, morrison, rossberg
 +
|}
 +
 
 +
 
 +
= Convert unmanaged to managed =
 +
 
 +
{| bgcolor=#fff
 +
!
 +
!align=center|Technologies
 +
!align=center|Difficulty
 +
!align=center|Contacts
 +
|-
 +
|width=62%|BRL-CAD has several books, presentations, and other documentation written in familiar publishing tools like Microsoft Word, Microsoft Powerpoint, Adobe InDesign, LaTeX, Apple Pages, and more.  They are "unmanaged" in the sense that they are not easily kept in sync, unlike the majority of BRL-CAD's docs that are compiled alongside code and easily updated with a text editor (i.e., "managed").  The main reason they are unmanaged is because they have specific layout and formatting.  For this project, the goal is to figure out how to manage them so that they're in an editable markup format like AsciiDoc **and** any custom formatting is preserved (e.g., through the use of stylesheets).
 +
References:
 +
* https://github.com/Ardemius/asciidoctor-presentation
 +
* https://asciidoctor.org/docs/asciidoctor-revealjs/#convert-asciidoc-into-slides
 +
* http://rhythmus.be/md2indd/
 +
* https://pandoc.org
 +
|width=18% align=center bgcolor=#eee|AsciiDoc, Pandoc, Markdown, Docbook XML
 
|width=10% align=center|Hard
 
|width=10% align=center|Hard
|width=10% align=center|yapp, morrison, rossberg
+
|width=10% align=center bgcolor=#eee|yapp, morrison, rossberg
 
|}
 
|}

Revision as of 11:32, 4 May 2020

If you want to work on computer-aided design (CAD), geometry, or graphics documentation, you've come to the right place! Please check out our project ideas below. They are roughly in order or priority and difficulty. Here are some links to help you get started with a proposal:

  1. Get BRL-CAD source code
  2. Read our existing docs
  3. Get additional doc perspective
  4. Read our contributor guide

We will consider GSoD proposals for all skill levels ranging from simple to crazy hard and everything in between. Introduce yourself via chat (preferred) or via e-mail, and we'll help you plan a project right for you.

Remember that project descriptions are just rough ideas. You must expand with considerably more detail. Set goals that fit your experience and interest.


Upgrade doc infrastructure

Technologies Difficulty Contacts
BRL-CAD has extensive documentation infrastructure using Docbook XML whereby we "compile" them into HTML, PDF, and other formats. This approach helps ensure docs remain up-to-date, without syntax/structure errors, and allows the documentation to be composed and reused in different ways (e.g., an tutorial on some topic might get embedded as an appendix in one document or a chapter to another). That said, the underlying format is tedious to write and hard for contributors. We'd like to migrate to a newer system like Antora or Docusaurus or MkDocs, converting everything over while still retaining build system integration.

References:

Docbook XML, AsciiDoc, Markdown, Antora Medium morrison, rossberg, yapp

Organize all existing user docs

Technologies Difficulty Contacts
Tame the beast. BRL-CAD has more than a million words of documentation spread across hundreds of documents. Some are huge, some are small. There are books, articles, presentations, manual pages, diagrams, reference cards, and more in a variety of formats and locations. The goal of this task to to conduct a complete audit of all existing documentation, catalog them, make recommendations and/or facilitate with merging overlapping documentation, and present all available documentation in a new web index.

References:

Mediawiki, Docbook XML, Subversion Easy yapp, morrison, rossberg

Write a "BRL-CAD Primitives" manual

Technologies Difficulty Contacts
BRL-CAD has approximately 2 dozen primitives. New users learning how to model with BRL-CAD for the first time end up utilizing an appendix in our existing MGED Tutorial Series, which is a brief guide to some of the supported primitives. For this project, we'd like all primitives to be documented with rendered visuals where appropriate, explanation of all parameters, and depiction of the variety possible with each primitive.

References:

Docbook XML, Subversion, basic reading of C/C++ Hard morrison, rossberg

Organize and publish developer docs

Technologies Difficulty Contacts
BRL-CAD uses Doxygen for API documentation. It's a simple way for developers to document API by merely adding /** comments like this */ to their code, typically before a function. The primary goal of this project is to make sure all of the public API has a Doxygen comment, has parameters tagged appropriately, grouped accordingly, and that all groupings are documented as well. The secondary goal is to then publish the output from Doxygen to our website in HTML and PDF forms so that reference documentation is available to everyone.

References:

Doxygen, Subversion, C/C++ code comments Medium yapp, morrison, rossberg


Convert unmanaged to managed

Technologies Difficulty Contacts
BRL-CAD has several books, presentations, and other documentation written in familiar publishing tools like Microsoft Word, Microsoft Powerpoint, Adobe InDesign, LaTeX, Apple Pages, and more. They are "unmanaged" in the sense that they are not easily kept in sync, unlike the majority of BRL-CAD's docs that are compiled alongside code and easily updated with a text editor (i.e., "managed"). The main reason they are unmanaged is because they have specific layout and formatting. For this project, the goal is to figure out how to manage them so that they're in an editable markup format like AsciiDoc **and** any custom formatting is preserved (e.g., through the use of stylesheets).

References:

AsciiDoc, Pandoc, Markdown, Docbook XML Hard yapp, morrison, rossberg