Editing Deuces

From BRL-CAD

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
This is a list of succinct tasks that are expected to take most people familiar with the prerequisites less than two hours to complete.  It's a great starting point for anyone interested in contributing to BRL-CAD.
+
This is a list of succinct tasks that are expected to take most people less than two hours to complete.  It's a great starting point for anyone interested in contributing to BRL-CAD.
  
 
The tasks are all roughly the same complexity with '''''no prior BRL-CAD experience expected'''''.  A description is provided along with a list of references and files you'll probably need to edit.  Can we make it any easier?
 
The tasks are all roughly the same complexity with '''''no prior BRL-CAD experience expected'''''.  A description is provided along with a list of references and files you'll probably need to edit.  Can we make it any easier?
Line 5: Line 5:
 
= Getting Started =
 
= Getting Started =
  
Contact us (via [[IRC]] or [[Mailing_Lists|brlcad-devel mailing list]]) if you have questions, comments, or ideas of your own you'd like to suggest.
+
Please do contact us (via [[IRC]] or [[Mailing_Lists|brlcad-devel mailing list]]) if you have any questions, corrections, comments, or ideas of your own that you'd like to suggest.
  
We've made an awesome virtual disk image that has everything you need preconfigured and ready to go:
+
We've made a really awesome virtual disk image that has everything you need included, preconfigured, and ready to be edited.  Here's what you do:
 +
# [https://sourceforge.net/projects/brlcad/files/BRL-CAD%20for%20Virtual%20Machines/ Download our image]
 +
# [https://www.virtualbox.org/wiki/Downloads Download and run VirtualBox]
 +
# Get started [[Compiling|compiling]]!
  
# [https://sourceforge.net/projects/brlcad/files/BRL-CAD%20for%20Virtual%20Machines/ Download our BRL-CAD Virtual Machine (VM) disk image.]
+
__TOC__
# [https://www.virtualbox.org/wiki/Downloads Install VirtualBox.]
+
 
# Import and start the VM, log in (the password is "Brlcad!" without the quotes).
+
----
# Run "svn up brlcad-svn-trunk" and get started!
+
 
 +
= Code =
 +
----
 +
''Tasks related to writing or refactoring code''
 +
 
 +
All of the code tasks require making changes to BRL-CAD's source code.  You will be expected to [[Patches|provide a patch file]] of all changes.  Make sure you ''read'' your patch file before submitting it.  Make sure your patch file will apply cleanly to an unmodified checkout of BRL-CAD:
 +
 
 +
svn co https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk brlcad.edit
 +
cd brlcad.edit
 +
# make changes
 +
svn diff > ~/my.patch
 +
# read ~/my.patch file with text editor
 +
cd ..
 +
svn co https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk brlcad.fresh
 +
cd brlcad.fresh
 +
patch -p0 < ~/my.patch
 +
# submit your patch file to our patches tracker
 +
&nbsp;
 +
 
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Move comments from source to header files ==
 +
BRL-CAD uses Doxygen source code comments to document the API.  The comments need to be '''''moved''''' from .c source code files to the corresponding .h API header file.  Note that this is a REALLY easy task, it is just cut-and-paste after all, so it just might take you more than a couple hours if you're inefficient with a text editor.  Regardless, you ''must'' make sure you compile before and after to make sure you didn't introduce a typo because you're changing so many files.
 +
 
 +
This is a collection of tasks.  Each task involves editing source code to move comments and verifying compilation wasn't broken in the process.  See each entry below for details.
 +
 
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... move LIBBN comments ===
 +
There are less than 150 API comments across 17 files in LIBBN that need to be moved. This will find most of them:
 +
grep -n -r -E '^/\*\*$' src/libbn | grep -v svn | grep -v '\*\*\*' | grep -v '@'
 +
 
 +
ONLY move comments on functions that have a corresponding BN_EXPORT declaration in the include/bn.h header.  It should take less than 30 seconds to review each one.
 +
 
 +
Code:
 +
* include/bn.h
 +
* src/libbn/*.c
  
=Pick a Task=
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... move LIBRT comments for files beginning with the letter 'd' ===
  
We break down all tasks into one of five categories. Don't be worried if the tasks all sound confusing to youJust pick one and start reading the references we've provided.  Join IRC or our mailing list and ask questions.
+
There are approximately 143 public API comments in LIBRT files starting with a 'd' (e.g., src/librt/db_tree.c) that need to be movedThis will find most of them:
 +
grep -n -r -E '^/\*\*' src/librt | grep -v svn | grep -v '\*\*\*' | grep -v '@' |grep 'librt/d'
  
# Code (programming)
+
ONLY move comments on functions that have a corresponding RT_EXPORT declaration in the include/raytrace.h header.  It should take less than 30 seconds to review each one.
# Documentation and Training (writing)
 
# Outreach and Research (graphics)
 
# Quality Assurance (testing)
 
# User Interface (designing)
 
  
__TOC__
+
Code:
 +
* include/raytrace.h
 +
* include/db.h
 +
* include/db5.h
 +
* src/librt/d*.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... move LIBRT comments for files beginning with a-c and e-o ===
 +
 
 +
There are approximately 150 public API comments in LIBRT files starting with 'a', 'b', 'c', (notice we skip 'd' files) 'e', 'f', ... 'n', and 'o'.  This will find most of them:
 +
grep -n -r -E '^/\*\*' src/librt | grep -v svn | grep -v '\*\*\*' | grep -v '@' |grep 'librt/[abcefghijklmno]'
 +
 
 +
ONLY move comments on functions that have a corresponding RT_EXPORT declaration in the include/raytrace.h header.  It should take less than 30 seconds to review each one.
 +
 
 +
Code:
 +
* include/raytrace.h
 +
* include/db.h
 +
* include/db5.h
 +
* src/librt/[abcefghijklmno]*.c
 +
* src/librt/comb/*.c
 +
* src/librt/binunif/*.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... move LIBRT comments for files beginning with 'q' through 'z' ===
 +
 
 +
There are approximately 106 public API comments in LIBRT files starting with 'q' through the letter 'z'  This will find most of them:
 +
grep -n -r -E '^/\*\*' src/librt | grep -v svn | grep -v '\*\*\*' | grep -v '@' |grep 'librt/[q-z]'
 +
 
 +
ONLY move comments on functions that have a corresponding RT_EXPORT declaration in the include/raytrace.h header.  It should take less than 30 seconds to review each one.
 +
 
 +
Code:
 +
* include/raytrace.h
 +
* include/db.h
 +
* include/db5.h
 +
* src/librt/[q-z]*.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... move LIBWDB comments ===
  
----
+
There are approximately 60 public API comments in LIBWDB files.  This will find most of them:
 +
grep -n -r -E '^/\*\*' src/libwdb | grep -v svn | grep -v '\*\*\*' | grep -v '@'
  
== Code ==
+
ONLY move comments that have a corresponding WDB_EXPORT declaration in the include/wdb.h header AND stub in placeholder /** */ comments for any declarations in the header still lacking a comment block.  ALSO, remove any 'F U N C T I O N' names that are spaced out from the comments.
----
 
''Tasks related to writing or refactoring code''
 
  
See the When You're Done section above for details on submitting your changes.
+
Code:
 +
* include/wdb.h
 +
* src/libwdb/*.c
 +
|}
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Fix bounding box function for our polygonal mesh (BoT) primitive ===
+
== Implement runtime detection of SSE ==
 +
 
 +
BRL-CAD will optionally leverage SSE instructions for some operations but SSE-support is set at compile-time.  If you attempt to perform SSE instructions on non-SSE hardware, it'll basically halt the application with an illegal instruction exception.  That's a fancy way of saying it crashes.
 +
 
 +
This task involves implementing a function (that will go into our LIBBU utility library) to reports whether SSE support is available at runtime.  The most prevalent method for doing this is demonstrated by the Mesa folks where you set up an exception handler for SIGILL and attempt an SSE instruction.  That's obviously a non-solution for Windows platforms, but is better than nothing and more useful than a Windows-only solution.  Even better if you can handle both or implement a cross-platform solution.  You'll implement a bu_sse_init() function that returns an error if SSE is not available at runtime.
 +
 
 +
Code:
 +
* include/bu.h
 +
* src/libbu/sse.c
 +
|}
 +
 
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Fix bounding box function for our polygonal mesh (BoT) primitive ==
  
 
BRL-CAD provides functions for its geometric primitives that define a bounding box - a box that completely encloses the volume described by the primitive.  Ideally, these boxes are as small as possible while still enclosing the primitive.  Currently the routine for BoTs is incorrect.  You can use stl-g, obj-g, or any of our other *-g converters to import BoT geometry for testing.  
 
BRL-CAD provides functions for its geometric primitives that define a bounding box - a box that completely encloses the volume described by the primitive.  Ideally, these boxes are as small as possible while still enclosing the primitive.  Currently the routine for BoTs is incorrect.  You can use stl-g, obj-g, or any of our other *-g converters to import BoT geometry for testing.  
Line 48: Line 151:
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Make mged 'tables' command not call system() ==
 +
 +
BRL-CAD's geometry editor (MGED) provides hundreds of functions that users can call on the command line.  One of our oldest commands writes data out to text files and calls the unix "sort" command to sort a list of items..  That's really bad.
 +
 +
This task involves replacing the three calls to system() with a call to quicksort() or any other simple in-memory sorting mechanism.
 +
 +
Code:
 +
* src/libged/tables.c
 +
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Close MGED when both windows are closed ===
+
== Separate LIBNURBS files into one class per file ==
  
BRL-CAD has an interactive geometry editor called MGEDIt's often the starting point for beginners and allows creation and manipulation of models using commandsWhen ''mged'' is run, it creates 2 windows:  a text-console command window and an interactive graphics window.  When the user closes one of those windows, there is a bug.  Closing the graphics window closes the command window.
+
BRL-CAD has a recently implemented a new library that isn't very well organizedThe files for that library are a haphazard collection of classes and functionsIt's a bit of a mess.
  
This task involves fixing this behavior so that ONLY closing ''both'' windows terminates the process properly and that closing either window does not take the other along with it.
+
This task involves making sure there is no more than one struct or class per source file.  Class/struct declarations should be in header files.  Class/struct method and functions should be in source files.  Headers should be fully self-sufficient and include proper #ifdef wrappers (see include/*.h for examples).  Make sure new files are named to match their enclosing class/struct.  Be sure to update the CMakeLists.txt build file too and test compilation.
  
 
Code:
 
Code:
* src/mged/mged.c
+
src/libnurbs/*
* src/tclscripts/mged/openw.tcl
 
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Implement mutex locking for Windows ==
  
 +
BRL-CAD implements support for running in parallel on computers with multiple CPUs or cores.  However, there are lots of ways to run in parallel.  BRL-CAD runs on Windows, but presently only in a single-threaded mode.  To make it work in parallel, we need to define how threads acquire a mutex lock.
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
This task involves implementing the necessary logic to acquire and release a mutex or semaphore on Windows.  You can use either, but probably want to call CreateMutex().  This requires a ''very'' minor source code modification to just one file, but make sure it works with a simple test program.  Make your test program call bu_semaphore_init()+bu_semaphore_acquire()+bu_semahpore_release(), see include/bu.h for API docs.
 +
 
 +
References:
 +
* http://msdn.microsoft.com/en-us/library/windows/desktop/ms686927(v=vs.85).aspx
 +
* http://msdn.microsoft.com/en-us/library/windows/desktop/ms686946(v=vs.85).aspx
 +
* Mark Walmsley: "Multi-Threaded Programming in C++", Springer, 2000 (although it has C++ in its title the basic functionality there is pure C)
 +
* include/bu.h
 +
 
 +
Code:
 +
* src/libbu/semaphore.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Implement thread creation for Windows ==
  
=== Implement a primitive centroid function ===
+
BRL-CAD implements support for running in parallel on computers with multiple CPUs or cores.  However, there are lots of ways to run in parallel.  BRL-CAD runs on Windows, but presently only in a single-threaded mode.  To make it work in parallel, we need to define how threads are created.
  
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones.  Every primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoidWikipedia, Wolfram Mathworld, and various other math sites (and research papers) around the web include the equations for most of our basic primitives while others are a little more tricky to compute.
+
This task involves implementing the necessary logic to create a new thread in bu_parallel().  This requires a ''very''  minor source code modification to just one file, but make sure it works with a simple test program. Make your program call bu_parallel(), see include/bu.h for API docs.
 
 
This task involves writing a new callback function that takes an rt_db_internal object and calculates its centroid (as a point_t 3D point). There are numerous examples in our code where we compute centroids for other primitives.  The primitives that do not already have a centroid callback are itemized in following.
 
  
 
References:
 
References:
* http://en.wikipedia.org/wiki/Centroid
+
* http://msdn.microsoft.com/en-us/library/windows/desktop/ms682453(v=vs.85).aspx
* http://mathworld.wolfram.com/
+
* Mark Walmsley: "Multi-Threaded Programming in C++", Springer, 2000 (although it has C++ in its title the basic functionality there is pure C)
* include/raytrace.h: See ft_centroid callback defined in the rt_functab structure
+
* include/bu.h
  
 
Code:
 
Code:
* src/librt/primitives/table.c
+
* src/libbu/parallel.c
* src/librt/primitives/[PRIMITIVE]/[PRIMITIVE].c
 
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Decouple LIBDM from LIBGED ==
 +
 +
BRL-CAD has a 3D display manager library (LIBDM) and a geometry editor command library (LIBGED).  For clean encapsulation and library management, it's desirable to keep library dependencies to a minimum.  LIBGED presently makes direct calls to LIBDM for a "screengrab" command.  Properly fixed, it should be possible to remove the LIBDM linkage from LIBGED's build file and the command still work as expected.
 +
 +
This task involves breaking the dependency of LIBGED on LIBDM by making LIBGED not directly call any LIBDM functions.  To do this, LIBGED will need to introduce a callback mechanism in the "ged" struct so that the screengrab command can capture an image without directly calling a LIBDM function.  This task is a little tricky, so you'll need to be somewhat proficient with C if you want any chance of completing this within a couple hours.
  
 +
Code:
 +
* include/ged.h
 +
* include/dm.h
 +
* src/libged/screengrab.h
 +
* src/libged/CMakeLists.txt
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Implement a function to convert triangle meshes to solid polygon mesh ==
  
=== Implement a primitive curvature function ===
+
BRL-CAD implements numerous "primitive" 3D entity types.  The Bag of Triangle (BoT) primitive implements simple triangle mesh geometryOur N-manifold geometry (NMG) primitive implements solid polygonal mesh geometry.  While we have a routine that converts an NMG to a BoT (mk_bot_from_nmg()), we do not have the reverse (mk_nmg_from_bot()).
 
 
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones each described by a collection of callback functions, for example rt_sph_bbox() returns the bounding box dimensions for a sphereWikipedia, Wolfram Mathworld, and various other math sites (and research papers) around the web include the equations for most of our basic primitives while others are a little more tricky to compute.
 
  
This task involves writing the callback function rt_xxx_curve() that computes the curvature at a given point on the surface of a primitive such as;
+
This task implements the missing mk_nmg_from_bot() function so that the input triangle mesh is converted into the NMG data structures and stitched together appropriately.
* superell
 
* cline
 
* extrude
 
* grip
 
* metaball
 
* hrt. 
 
There are numerous examples in our code where we compute the curvature for other primitives like the ellipsoid, sphere, elliptical parabola, etc.
 
  
 
References:
 
References:
* http://en.wikipedia.org/wiki/Curvature
+
* src/librt/primitives/nmg
* http://en.wikipedia.org/wiki/Radius_of_curvature_(mathematics)
+
* src/librt/primitives/bot
* http://mathworld.wolfram.com/
 
* include/raytrace.h: See the data structure that holds the curvature of a surface at a point (from Line 296) as well as the prototype for ft_curve() callback function defined in the rt_functab structure ( Line 2078).
 
  
 
Code:
 
Code:
* src/librt/primitives/table.c
+
* src/libwdb/nmg.c
* src/librt/primitives/[PRIMITIVE]/[PRIMITIVE].c
 
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Close MGED when both windows are closed ==
 +
 +
BRL-CAD has an interactive geometry editor called MGED.  It's often the starting point for beginners and allows creation and manipulation of models using commands.  When ''mged'' is run, it creates 2 windows:  a text-console command window and an interactive graphics window.  When the user closes one of those windows, there is a bug.  Closing the graphics window closes the command window.
 +
 +
This task involves fixing this behavior so that ONLY closing ''both'' windows terminates the process properly and that closing either window does not take the other along with it.
  
 +
Code:
 +
* src/mged/mged.c
 +
* src/tclscripts/mged/openw.c
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Add MGED key-binding to reopen the command window ==
  
=== Implement a primitive UV-mapping callback ===
+
BRL-CAD has an interactive geometry editor called MGED. It's often the starting point for beginners and allows creation and manipulation of models using commands. When MGED is invoked, it creates 2 windows:  a text-console command window and an interactive graphics window.  If the user closes the text-console command window, they are left with the interactive graphics window.  There is presently no way (correct us if we're wrong) to get the text-console back without restarting mged.  A good way to test this is to run in classic mode and run the 'gui' command:
 +
 
 +
sushi:~ morrison$ mged -c test.g
 +
BRL-CAD Release 7.22.0  Geometry Editor (MGED)
 +
    Fri, 24 Aug 2012 00:02:42 -0400, Compilation 6
 +
    morrison@sushi.local:/usr/brlcad/rel-7.22.0
 +
 +
attach (nu|X|ogl)[nu]? 
 +
mged> gui
 +
 
 +
This task involves adding some mechanism, perhaps a simple key binding, to the graphics window so that you can get the command window back on-demand.
 +
 
 +
Code:
 +
* src/mged/mged.c
 +
* src/tclscripts/mged/openw.c
 +
 
 +
|}
 +
 
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
 
 +
== Implement a primitive UV-mapping callback ==
  
 
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones.  Every primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoid.  One of those functions describes a UV mapping of the object's surface, which is used for things like texture and bump mapping.  An example of this is rt_ell_uv() in the src/librt/primitives/ell/ell.c source file for an ellipsoid.  Several of our more complex primitive types (such as BoT, NMG, and BREP/NURBS) do not presently implement a UV-mapping function leading to unexpected runtime behavior.
 
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones.  Every primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoid.  One of those functions describes a UV mapping of the object's surface, which is used for things like texture and bump mapping.  An example of this is rt_ell_uv() in the src/librt/primitives/ell/ell.c source file for an ellipsoid.  Several of our more complex primitive types (such as BoT, NMG, and BREP/NURBS) do not presently implement a UV-mapping function leading to unexpected runtime behavior.
Line 130: Line 297:
 
* src/librt/primitives/[PRIMITIVE]/[PRIMITIVE].c, read the rt_*_uv() function
 
* src/librt/primitives/[PRIMITIVE]/[PRIMITIVE].c, read the rt_*_uv() function
  
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... UV-mapping for extruded sketches (EXTRUDE) ====
+
=== ... UV-mapping for extruded bitmap objects (EBM) ===
 +
 
 +
Code:
 +
* src/librt/primitives/ebm/ebm.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... UV-mapping for extruded 2D sketch objects (EXTRUDE) ===
  
 
Code:
 
Code:
Line 141: Line 319:
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... UV-mapping for gridded volumes (VOL) ===
 +
 +
Code:
 +
* src/librt/primitives/vol/vol.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... UV-mapping for N-faced arbitrary polyhedrons (ARBN) ===
 +
 +
Code:
 +
* src/librt/primitives/arbn/arbn.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
 +
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Implement a platform independent re-entrant sort function ===
+
=== ... UV-mapping for superellipsoids (SUPERELL) ===
  
The classic C library qsort() does not support a context parameter. A work around is to store the context information in a static variable. However, this solution is not thread save and may result in unpredictable behavior.
+
Code:
 +
* src/librt/primitives/superell/superell.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
  
There are platform specific sort functions qsort_r() in incompatible versions for BSD and GNU and qsort_s() for MSVC.  Your task is to implement a bu_sort() function for BRL-CAD which is platform independent.
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... UV-mapping for triangle meshes (BOT) ===
  
 
Code:
 
Code:
* src/libbu/sort.c
+
* src/librt/primitives/bot/bot.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
  
The new sort function could look like this:
 
void bu_sort(genptr_t array, size_t nummemb, size_t sizememb, int (*compare)(const_genptr_t, const_genptr_t, genptr_t), genptr_t context);
 
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... UV-mapping for solid polygonal meshes (NMG) ===
  
----
+
Code:
 +
* src/librt/primitives/nmg/nmg.c
 +
* src/librt/primitives/table.c
 +
* include/rtgeom.h
  
 
|}
 
|}
 +
|}
 +
 
&nbsp;
 
&nbsp;
&nbsp;
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
=== Solve fonts related bug in new wiki theme ===
 
  
BRL-CAD has been working on a new incarnation of the website and has developed a new wiki theme and wordpress theme. Wiki theme uses a font called 'open-sans' from google fonts directory. It's linked via CSS but it does not get loaded (we still see default serif all over the place). So your task will be to debug the CSS code and get Open Sans loaded.  
+
== Implement a primitive surface area function ==
 +
 
 +
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones. Every primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoid. Wikipedia, Wolfram Mathworld, and various other math sites (and research papers) around the web include the equations for most of our basic primitives while others are a little more tricky to compute.
  
Links:
+
This task involves writing a new callback function that takes an rt_db_internal object and calculates the surface area (units are mm^2).  There are numerous examples in our code where we compute surface area for other primitives.  The primitives that do not already have a centroid callback are itemized in following.
*http://beta.brlcad.org/wiki/Main_Page
+
 
 +
References:
 +
* http://en.wikipedia.org/wiki/Surface_area
 +
* http://mathworld.wolfram.com/
 +
* http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0274936
 +
* include/raytrace.h: See ft_surf_area callback defined in the rt_functab structure
  
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for elliptical hyperboloids (EHY) ===
  
----
+
Code:
 +
* src/librt/primitives/ehy/ehy.c
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for right hyperbolic cylinders (RHC) ===
 +
 +
Code:
 +
* src/librt/primitives/rhc/rhc.c
 +
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Better placement of icons in wiki theme ===
+
=== ... surface area function for hyperboloids of one sheet (HYP) ===
  
BRL-CAD has been working on a new incarnation of the website and has developed a new wiki theme and wordpress theme. Wiki theme is responsive but has a small styling problem. On smaller screens icons near the search bar gets misplaced and unaligned. Your task would be to fix that. Task would include diving into sass file that corresponds to styling of this part of theme (given below) and adjusting spacing between icons to keep them aligned even at smaller screens.
+
Code:
 +
* src/librt/primitives/hyp/hyp.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for polyhedron with 4 to 8 sides (ARB8) ===
  
Links:
+
Code:
*http://beta.brlcad.org/wiki/Main_Page
+
* src/librt/primitives/arb8/arb8.c
  
 +
|}
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for N-faced polysolid (ARBN) ===
 +
 +
Code:
 +
* src/librt/primitives/arbn/arbn.c
  
----
 
 
|}
 
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for extruded bitmaps (EBM) ===
  
== Documentation and Training ==
+
Code:
----
+
* src/librt/primitives/ebm/ebm.c
''Tasks related to creating/editing documents and helping others learn more about BRL-CAD''
 
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Add missing documentation (for any ONE command) ===
+
=== ... surface area function for gridded volumes (VOL) ===
  
BRL-CAD is an extensive system with more than 400 commands and more than a million pages of documentation, but there are approximately 120 commands that are entirely undocumented:
+
Code:
 +
* src/librt/primitives/vol/vol.c
 +
 
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for super ellipsoids (SUPERELL) ===
  
a-d archer asc2g asc2pix bot-bldxf bottest brep_cube brep_simple brickwall btclsh burst bw-a bw-d bwish c-d chan_add clutter contours d-a damdf dauto dauto2 d-bw dconv ddisp d-f dfft d-i dmod double-asc dpeak dsel dsp_add dstat d-u dwin euclid_format euclid_unformat fbgammamod f-d fence fhor f-i g-adrt g-euclid1 g-jack globe g-off i-a i-d i-f ihist imod istat jack-g kurt lowp molecule nmgmodel nmg-sgp off-g pipe pipetest pix2g pix3filter pixcount pixelswap pixembed pixfields pixfieldsep pixflip-fb pixpaste pix-spm pix-yuv plstat pyramid rawbot remapid rlesortmap rletovcr room rtcell rtexample rtfrac rtrad rtsil rtsrv script-tab sketch solshoot sphflake spltest spm-fb ssampview syn tea tea_nmg testfree texturescale torii ttcp tube txyz-pl u-a u-bw u-d u-f umod ustat vcrtorle vegitation wall wdb_example xbmtorle xyz-pl yuv-pix
+
Code:
 +
* src/librt/primitives/superell/superell.c
  
This task involves writing basic documentation for '''JUST ONE''' of those commands in the Docbook XML format.  The command documentation should provide a one-sentence description, a detailed paragraph description (200+ words), explanation of '''all''' available command-line options, and one or more examples on how to use the command.
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for polygonal meshes (NMG) ===
  
 
Code:
 
Code:
* doc/docbook/system/man1/en/Makefile.am
+
* src/librt/primitives/nmg/nmg.c
* doc/docbook/system/man1/en/*.xml
 
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Write an article "BRL-CAD for dummies" ===
+
=== ... surface area function for triangle meshes (BOT) ===
  
Although BRL-CAD has extensive documentation, still it needs a short and simple document which is particularly built for dummies.
+
Code:
 +
* src/librt/primitives/bot/bot.c
  
This task involves writing a article named '''BRL-CAD for dummies'''. This article should start with the installation process, if there is any existing installation guide for dummies, provide a link to it. The main motive of this article to empower dummy to make his/her first model using BRL-CAD. One thing to be kept in mind while writing this article is that this article is mainly concentrated for dummies. So use simple language to an extent and if you need to mention some technical term, first explain that term.
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... surface area function for NURBS objects (BREP) ===
  
The output of this task can be a pdf, html, doc, odt or any other document file that contains this article. Go through the link provided. Use screenshots and images to make it look attractive so that the reader is not bored.
+
Code:
 
+
* src/librt/primitives/brep/brep.cpp
Reference:
 
* http://brlcad.org/wiki/Documentation
 
  
 +
|}
 
|}
 
|}
  
 
&nbsp;
 
&nbsp;
 
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
=== Translate "Contributors Guide To BRL-CAD" To Any Language ===
 
  
People interested in improving BRL-CAD sometimes find themselves lost in a sea of information. In all, BRL-CAD has more than a million words of documentation across hundreds of manual pages, dozens of tutorials and examples, hundreds of wiki pages, dozens of technical papers, and other resources. There are literally thousands of features and this can sometimes pose problems.
+
== Implement a primitive volume function ==
  
In 2013, a team of contributors got to California and worked on an entire book titled "Contributors Guide To BRL-CAD" in just a few days. This great resource needs to be translated to other languages to attract developers from other lingual backgrounds (who don't read English ) to contribute to BRL-CAD.
+
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and cones.  Every primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoid. Wikipedia, Wolfram Mathworld, and various other math sites (and research papers) around the web include the equations for most of our basic primitives while others are a little more difficult to compute.
  
This task involves translating the chapters/sections of the "Contributors Guide To BRL-CAD" into a language of your choice such as Mandarin, French, Chinese, Spanish, German, Hindi, Arabic, Russian, etc. Chapters/Sections include
+
This task involves writing a new callback function that takes an rt_db_internal object and calculates the volume (units are mm^3).  There are numerous examples in our code where we compute volume for other primitives.  The primitives that do not already have a volume callback are itemized in following.
  
* Feature Overview
+
References:
* Working with our Code
+
* http://en.wikipedia.org/wiki/Volume
* What code to work on
+
* http://mathworld.wolfram.com/
* How to contribute
+
* http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0274936
* .... (Just to name a few )
+
* include/raytrace.h: See ft_volume callback defined in rt_functab structure
  
The output of this task can be a pdf, html, doc, odt or any other document file that contains the translated article.Images in the original document (see link in Reference below) should not be changed ! only text should be.
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... volume function for right hyperbolic cylinders (RHC) ===
  
Reference:
+
Code:
* http://en.flossmanuals.net/_booki/contributors-guide-to-brl-cad/contributors-guide-to-brl-cad.pdf
+
* src/librt/primitives/rhc/rhc.c
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... volume function for elliptical hyperboloids (EHY) ===
  
 +
Code:
 +
* src/librt/primitives/ehy/ehy.c
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
=== ... volume function for hyperboloids of one sheet (HYP) ===
  
=== Write a "BRL-CAD Commands Quick Reference" document ===
+
Code:
 +
* src/librt/primitives/hyp/hyp.c
  
There is already a command quick reference for BRL-CAD's MGED geometry editing tool, but there is not a similar document for BRL-CAD's 400+ command-line commands.
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... volume function for superellipsoids (SUPERELL) ===
  
This task involves writing a quick reference document similar to [http://brlcad.org/w/images/5/52/MGED_Quick_Reference_Card.pdf the MGED quick reference] but for BRL-CAD commands.  The sheet should minimally include the following commands:
+
Code:
 +
* src/librt/primitives/superell/superell.c
  
mged, rt*, *-g, g-*, fb*, *fb, nirt, remrt, rtsrv, asc2g, g2asc, dbupgrade, pix*, *pix, *-*, brlman, benchmark
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... volume function for extruded bitmaps (EBM) ===
  
References:
+
Code:
* http://brlcad.org/wiki/Documentation
+
* src/librt/primitives/ebm/ebm.c
* http://brlcad.org/w/images/5/52/MGED_Quick_Reference_Card.pdf
 
* [http://appletree.or.kr/quick_reference_cards/CVS-Subversion-Git/git-cheat-sheet-large.png git example]
 
* [http://www.stdout.org/~winston/latex/latexsheet-0.png latex example]
 
* [http://img.docstoccdn.com/thumb/orig/524314.png another example]
 
* [http://www.inmensia.com/files/pictures/internal/CheatSheetDrupal4.7.png drupal example]
 
* [http://www.phpmagicbook.com/wp-content/uploads/2010/06/php-reference-card.jpg php example]
 
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
=== ... volume function for gridded volumes (VOL) ===
  
=== Doxygen cleanup ===
+
Code:
 +
* src/librt/primitives/vol/vol.c
  
BRL-CAD uses Doxygen for most API documentation but the comment blocks are not optimally set up for Doxygen output.
+
|}
 
+
&nbsp;
This task involves cleaning up the Doxygen comments in the library so that useful reports and API documentation automatically generated (correctly, completely, and cleanly).  Verify/fix any Doxygen syntax.  Verify/fix groups so that functions are organized neatly and all contained within a group.  Provide patches that give clean (PDF) output from Doxygen.
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
References:
 
* http://www.jiggerjuice.net/software/doxygen.html
 
* http://www.stack.nl/~dimitri/doxygen/starting.html
 
* http://www.stack.nl/~dimitri/doxygen/
 
 
 
{| cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
==== ... doxygen cleanup for LIBBU ====
+
=== ... volume function for triangle meshes (BOT) ===
 
 
There are approximately 300 documented API function calls in LIBBU.
 
  
 
Code:
 
Code:
* include/bu.h
+
* src/librt/primitives/bot/bot.c
* src/libbu
 
* misc/Doxyfile
 
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... doxygen cleanup for LIBWDB ====
+
=== ... volume function for solid polygonal meshes (NMG) ===
 
 
There are approximately 100 documented API function calls in LIBWDB.
 
  
 
Code:
 
Code:
* include/wdb.h
+
* src/librt/primitives/nmg/nmg.c
* include/raytrace.h
 
* src/libwdb
 
* misc/Doxyfile
 
  
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... doxygen cleanup for LIBRT ====
+
=== ... volume function for extruded sketches (EXTRUDE) ===
  
There are approximately 1000 documented API function calls in LIBRT.  
+
Code:
 +
* src/librt/primitives/extrude/extrude.c
  
Code:
 
* include/raytrace.h
 
* src/librt
 
* src/librt/primitives
 
* src/librt/comb
 
* src/librt/binunif
 
* misc/Doxyfile
 
 
|}
 
|}
 +
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Write up Wiki page tutorial on our Volumetric Primitive ===
 
  
BRL-CAD provides a couple dozen distinct primitives.  Each primitive is defined by a set of parametersSeveral of the more complex primitives have a wiki page describing them in more detail with an example on how to create them.
+
== Implement a primitive centroid function ==
 +
 
 +
BRL-CAD provides more than two dozen types of geometry "primitives" such as ellipsoids, boxes, and conesEvery primitive is described by a collection of callback functions, for example rt_ell_bbox() returns the bounding box dimensions for an ellipsoidWikipedia, Wolfram Mathworld, and various other math sites (and research papers) around the web include the equations for most of our basic primitives while others are a little more tricky to compute.
  
This task involves writing up a page on the VOL primitive.  Figure out how to use it (see the "in" command), create an example input data set, and write up a wiki page on exactly what steps are needed similar to our other wiki pages:
+
This task involves writing a new callback function that takes an rt_db_internal object and calculates its centroid (as a point_t 3D point).  There are numerous examples in our code where we compute centroids for other primtiives.  The primitives that do not already have a centroid callback are itemized in following.
  
 
References:
 
References:
* http://brlcad.org/wiki/DSP
+
* http://en.wikipedia.org/wiki/Centroid
* http://brlcad.org/wiki/Sketch
+
* http://mathworld.wolfram.com/
* http://brlcad.org/wiki/EBM  <-- particularly useful as the data is similar for VOL
+
* include/raytrace.h: See ft_centroid callback defined in the rt_functab structure
  
Show how to create a VOL with at least two layers/slices. Include images like the other examples.  Put the write-up at http://brlcad.org/wiki/VOL
+
Code:
 +
* src/librt/primitives/table.c
 +
* src/librt/primitives/[PRIMITIVE]/[PRIMITIVE].c
  
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for elliptical hyperboloids (EHY) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for right hyperbolic cylinders (RHC) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for hyperboloids of one sheet (HYP) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for polyhedron with 4 to 8 sides (ARB8) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for extruded bitmaps (EBM) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for gridded volumes (VOL) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for N-faced polysolids (ARBN) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for extruded sketches (EXTRUDE) ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... centroid function for superellipsoids (SUPERELL) ===
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Write a wiki tutorial on how to create a polygonal mesh (NMG) manually ===
+
=== ... centroid function for solid polygonal meshes (NMG) ===
 +
|}
 +
|}
  
BRL-CAD provides a couple dozen distinct primitives.  Each primitive is defined by a set of parameters.  Several of the more complex primitives have a wiki page describing them in more detail with an example on how to create them.
+
----
  
This task involves writing up a page on the NMG polygonal mesh primitive.  Figure out how to use it (not a simple task, will require some trial and error), create an example input, and write up a wiki page on exactly what steps are needed similar to our other wiki pages:
+
= Documentation and Training =
 +
----
 +
''Tasks related to creating/editing documents and helping others learn more about BRL-CAD''
  
References:
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
* http://brlcad.org/wiki/DSP
+
|
* http://brlcad.org/wiki/EBM
+
== Add missing documentation (for JUST ONE command) ==
* http://brlcad.org/wiki/Sketch <-- particularly useful as neither NMG nor sketch are meant to be created manually
+
 
 +
BRL-CAD is an extensive system with more than 400 commands and more than a million pages of documentation, but there are approximately 120 commands that are entirely undocumented:
 +
 
 +
a-d archer asc2g asc2pix bot-bldxf bottest brep_cube brep_simple brickwall btclsh burst bw-a bw-d bwish c-d chan_add clutter contours d-a damdf dauto dauto2 d-bw dconv ddisp d-f dfft d-i dmod double-asc dpeak dsel dsp_add dstat d-u dwin euclid_format euclid_unformat fbgammamod f-d fence fhor f-i g-adrt g-euclid1 g-jack globe g-off i-a i-d i-f ihist imod istat jack-g kurt lowp molecule nmgmodel nmg-sgp off-g pipe pipetest pix2g pix3filter pixcount pixelswap pixembed pixfields pixfieldsep pixflip-fb pixpaste pix-spm pix-yuv plstat pyramid rawbot remapid rlesortmap rletovcr room rtcell rtexample rtfrac rtrad rtsil rtsrv script-tab sketch solshoot sphflake spltest spm-fb ssampview syn tea tea_nmg testfree texturescale torii ttcp tube txyz-pl u-a u-bw u-d u-f umod ustat vcrtorle vegitation wall wdb_example xbmtorle xyz-pl yuv-pix
  
Note the "facetize" command in mged will convert an existing object into NMG format.  The get/put commands should help from there like the sketch tutorial.
+
This task involves writing a failed document for '''JUST ONE''' of those commands in the Docbook XML format.  The command documentation should provide a one-sentence description, a detailed paragraph description, explanation of all available command-line options, and one or more examples on how to use the command.
  
Show how to create an NMG cube or wedge or similar simple shape.  Include images like the other examples.  Put the write-up at http://brlcad.org/wiki/NMG
+
Code:
 +
* doc/docbook/system/man1/en/Makefile.am
 +
* doc/docbook/system/man1/en/*.xml
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Fix Image Formatting in BRL-CAD's DocBook Documentation (any ONE large document or 4 smaller documents) ===
+
== Write a tutorial on compiling BRL-CAD with XCode on Mac OS X ==
  
The majority of BRL-CAD's documentation is defined as DocBook files, from which other formats (HTML, PDF, man page, etc.) can be generated.  PDF files present a particular challenge, and have some very specific requirements to achieve "good" formatting.
+
BRL-CAD uses the CMake build system to generate outputs for a variety of platforms.  It will output Makefiles, Microsoft Visual Studio build files, XCode project files, Eclipse build files and more.
  
BRL-CAD's DocBook files need to uniformly use a style of image inclusion that is aware of what "role" the image is supposed to serve.   A "basic" image inclusion example looks like this:
+
This task involves generating an XCode project with our build and verifying that it successfully compiles all of BRL-CAD.  Document the process on our wiki as a tutorial.  Include images/screen shots when referring to visual actions within XCode.
  
  <mediaobject>
+
References:
    <imageobject>
+
* http://www.cmake.org/
      <imagedata align="center" fileref="../../lessons/en/images/img.png" format="PNG"/>
+
* http://brlcad.org/wiki/
    </imageobject>
 
    <nowiki><caption></nowiki>
 
      <para>
 
        Caption goes here.
 
      </para>
 
    </caption>
 
  </mediaobject>
 
  
This task involves switching image inclusions that use the above style to something like the following:
+
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Write a tutorial on compiling BRL-CAD with Eclipse on Linux ==
  
  <mediaobject>
+
BRL-CAD uses the CMake build system to generate outputs for a variety of platforms.  It will output Makefiles, Microsoft Visual Studio build files, XCode project files, Eclipse build files and more.
    <imageobject role="html">
+
 
      <imagedata align="center" fileref="../../books/en/images/img.png" format="PNG"/>
+
This task involves generating an Eclipse project with our build and verifying that it successfully compiles all of BRL-CAD. Document the process on our wiki as a tutorial. Include images/screen shots when referring to visual actions within Eclipse.
    </imageobject>
+
 
    <imageobject role="fo">
+
References:
      <imagedata align="center" fileref="../../books/en/images/img.png" format="PNG"/>
+
* http://www.eclipse.org/
    </imageobject>
+
* http://cmake.org
    <nowiki><caption></nowiki>
+
* http://www.cmake.org/Wiki/Eclipse_CDT4_Generator
      <para>
+
* http://brlcad.org/wiki/
        Caption goes here.
 
      </para>
 
    </caption>
 
</mediaobject>
 
 
The "role" flag to imageobject provides the opportunity to specify different image formatting options when the output is HTML (role="html") or PDF (role="fo").
 
  
The captions should be preserved as above on mediaobjects that have them, but mediaobjects without a caption should also be converted and there is no need to add a caption in such cases.
+
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Document MGED's 'saveview' command options ==
  
Any patch that makes changes to the DocBook sources should result in a successful "make doc" build testThis won't generate PDF documents, but it will validate the XML files and produce HTML - remember that introducing breakage means the patch won't be accepted.
+
BRL-CAD's primary geometry editor (MGED) provides hundreds of commands.  Two of those commands are the savewview and loadview commands that write current view settings out to a text file and read them back in.  The saveview command provides -e -i -l and -o options, but they are not documented.
  
Remember, the tasks are simply to do the above conversion for all images in the file or files, not to introduce PDF specific formattingFormatting fixes will be needed, but they are very much "case by case" and will take both additional time and a working Apache FOP installation, as well as knowledge of how to enable PDF generation.  If all image inclusions have been converted successfully and a student is interested in actually fixing the formatting, please discuss it with us on IRC or the mailing list.
+
This task involves writing documentation for those missing options.  Consult the source code to see what they do and add the corresponding sections into our Docbook XML doc just like we do in our other documentation files.  Test compilation to make sure your sytax is correct.
  
 
References:
 
References:
* doc/docbook/books/en/BRL-CAD_Tutorial_Series-VolumeIII.xml
+
* src/libged/saveview.c
 +
* doc/docbook/system/mann/en/*.xml
  
 
Code:
 
Code:
* doc/docbook
+
* doc/docbook/system/mann/en/saveview.xml
  
 
|}
 
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Write "MGED Interface" reference document==
 +
 +
BRL-CAD's primary geometry editor is called MGED.  MGED's documentation is extensive but incomplete without a concise 1 or 2 page document that details MGED's interface.
 +
 +
This task involves writing an interface reference document that gives a brief descriptive overview of the key bindings, mouse bindings, and primary GUI elements.  The [http://brlcad.org/w/images/8/8c/Shift_Grips_Quick_Reference_Guide.pdf shift grips reference] should be incorporated, albeit much more concisely and organized.
 +
 +
References:
 +
* http://brlcad.org/wiki/Documentation
 +
* http://brlcad.org/w/images/c/cf/Introduction_to_MGED.pdf
 +
* http://brlcad.org/w/images/8/8c/Shift_Grips_Quick_Reference_Guide.pdf
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Make a step by step tutorial for creating BRL-CAD model ===
+
== Convert src/conv man pages to valid Docbook  ==
  
BRL-CAD is said to have an expert friendly User Interface so new users mostly have a tough time getting around it's UI and making models. So anything link Django poll app tutorial https://docs.djangoproject.com/en/dev/intro/tutorial01/ would be very helpful.  
+
BRL-CAD is in the process of converting its documentation into Docbook 4.5 format, in order to enable automatic generation of output in different formats (html, pdf, man) from a single source. This conversion includes existing UNIX man pages.
  
 +
This task involves using the doclifter tool to perform a rough conversion to Docbook of all man pages in the src/conv subdirectory of the BRL-CAD source tree (about 40 files), then performing whatever manual corrections are needed to the autogenerated xml files to make them valid Docbook (some conversions have already been done and can serve as guides).  The simplest way to confirm the files are successfully converted is to incorporate them into BRL-CAD's build logic for Docbook man pages and view the output using brlman and an html viewer.  It is recommended to use the Emacs editor with the nxml mode in order to more easily identify and fix errors, but this is not a requirement.
 +
 +
References:
 +
* Current Docbook man pages: http://brlcad.svn.sourceforge.net/viewvc/brlcad/brlcad/trunk/doc/docbook/system/
 +
* Docbook documentation: http://www.docbook.org/tdg/en/html/docbook.html
 +
* Doclifter conversion tool: http://www.catb.org/~esr/doclifter/
 +
* Emacs editor: http://www.gnu.org/software/emacs/emacs.html
 +
* nxml Emacs mode: http://www.thaiopensource.com/nxml-mode/
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Find 5 bugs in OGV ===
+
== Write a "BRL-CAD Commands Quick Reference" document ==
  
Online Geometry Viewer is a web based application with which you can see 3D .g models in browser without the use of any plugins. Your task will be to deploy OGV locally and find 5 bugs or errors in it.  
+
There is already a command quick reference for BRL-CAD's MGED geometry editing tool, but there is not a similar document for BRL-CAD's 400+ command-line commands.
  
Links:
+
This task involves writing a quick reference document similar to [http://brlcad.org/w/images/5/52/MGED_Quick_Reference_Card.pdf the MGED quick reference] but for BRL-CAD commands.
https://github.com/BRL-CAD/OGV-meteor/
+
 
 +
References:
 +
* http://brlcad.org/wiki/Documentation
 +
* http://brlcad.org/w/images/5/52/MGED_Quick_Reference_Card.pdf
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Doxygen cleanup ==
  
=== Find 5 coding guidelines violations in OGV ===
+
BRL-CAD uses Doxygen for most API documentation but the comment blocks are not optimally set up for Doxygen output.
  
Online Geometry Viewer is a web based application with which you can see 3D .g models in browser without the use of any plugins. Your task will be to deploy OGV locally, look into code and see if any coding guidelines are violated.  
+
This task involves cleaning up the Doxygen comments in the library so that useful reports and API documentation automatically generated (correctly, completely, and cleanly).  Verify/fix any Doxygen syntax.  Verify/fix groups so that functions are organized neatly and all contained within a group.  Provide patches that give clean (PDF) output from Doxygen.
  
Links:
+
References:
https://github.com/BRL-CAD/OGV-meteor/
+
* http://www.jiggerjuice.net/software/doxygen.html
 +
* http://www.stack.nl/~dimitri/doxygen/starting.html
 +
* http://www.stack.nl/~dimitri/doxygen/
 +
 
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... doxygen cleanup for LIBBU ===
 +
 
 +
There are approximately 300 documented API function calls in LIBBU.
 +
 
 +
Code:
 +
* include/bu.h
 +
* src/libbu
 +
* misc/Doxyfile
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
----
+
=== ... doxygen cleanup for LIBBN ===
 +
 
 +
There are approximately 300 documented API function calls in LIBBN.
  
==Outreach and Research ==
+
Code:
----
+
* include/bn.h
''Tasks related to community management, outreach/marketing, studying problems, and recommending solutions''
+
* include/plot3.h
 +
* include/vmath.h
 +
* src/libbn
 +
* misc/Doxyfile
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Profile NURBS prep performance ===
+
=== ... doxygen cleanup for LIBWDB ===
  
BRL-CAD implements support for rendering of NURBS representation geometry.  If you import a solid 3DM or STEP format model into BRL-CAD, it will import as BREP/NURBS geometry.  Opening that geometry in BRL-CAD's MGED editor will tell you what objects are available and our 'rt' tool will raytrace it.  When geometry is ray traced, it first goes through a "prep" phase and then it starts shooting rays.  Our prep phase is entirely unoptimized so we'd like to know where all the time is presently being spent during prep..
+
There are approximately 100 documented API function calls in LIBWDB.  
  
This task involves importing some NURBS geometry into BRL-CAD and ray tracing that geometry with a profiler watching our prep performance. Any profiler will do, including gprof, but a performance monitor like oprofile or the Mac "Instruments" application (or Shark) are preferred.
+
Code:
 +
* include/wdb.h
 +
* include/raytrace.h
 +
* src/libwdb
 +
* misc/Doxyfile
  
Learning how to use a profiler is beyond the scope of this task, so it make take you considerably longer to provide us with useful information if you've never run a profiler before.
+
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... doxygen cleanup for LIBRT ===
  
To capture prep performance, you will need to import some fairly complex geometry. You should be able to search google with "filetype:3dm" or "filetype:step" or find something on grabcad.com to import
+
There are approximately 1000 documented API function calls in LIBRT.  
  
Running "tops" within mged will tell you what geometry is available for rendering.
+
Code:
 
+
* include/raytrace.h
Running "rt -o file.png -s32" on the system command line (not inside mged) should minimize the ray overhead or you can specifically isolate the prep phase we care about.  Prep is the time between when rt is run where it opens a window until the first pixels are fired and pixels start filling in.
+
* src/librt
 +
* src/librt/primitives
 +
* src/librt/comb
 +
* src/librt/binunif
 +
* misc/Doxyfile
 +
|}
 
|}
 
|}
  
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Continue investigating GMP integration ===
+
== Write a "BRL-CAD Ray Tracing Shaders" tutorial ==
  
BRL-CAD uses a fastf_t typedef for most all math operations that is usually a "double" floating point type. We would like to provide the option for resorting to exact arithmetic if possible by merely redefining fastf_t to a C++ type sufficiently overloaded to behave the same. You should be proficient with C++ operator overloading to take this work on.  This task is a continuation of a prior GCI task (read it in full!):
+
BRL-CAD includes numerous shaders that let you specify different optical effects during ray tracing.
  
http://www.google-melange.com/gci/task/view/google/gci2012/7946218
+
This task involves writing a brief tutorial that describes what shaders are and how one specifies them for geometry.  How shaders are specified is already described in detail in the [http://brlcad.org/w/images/c/cf/Introduction_to_MGED.pdf Introduction to MGED] document.
  
This task involves testing compilation with a C++ class with overloaded operators such that vmath macro calls still work as well as a sampling of LIBBN API function calls without major changes to the original code. A perfect example case study would be creating the class then testing whether bn_dist_pt3_pt3() and bn_mat_determinant() compute correctly for values that cannot be exactly represented with floating point arithmetic.
+
Code:
 +
* src/liboptical/sh_*.(for available shader names and corresponding options)
  
Building on the previous GCI task work, take it to the next step. Try setting a vector to 1/3, 1/3, 1/3 and 0.1, 0.1, 0.1 and get proper values to print.  Change the V3ARGS() macro if needed.  If that all works, try to get bn_dist_pt3_pt3() to work.  Report and discuss your progress.
+
References:
 +
* http://brlcad.org/w/images/2/2c/Optical_Shaders.pdf
 +
* http://brlcad.org/w/images/c/cf/Introduction_to_MGED.pdf
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Design a T-Shirt for BRL-CAD ===
+
== BibTeX reference files ==
  
This task involves designing a T-Shirt for BRL-CAD. Use your designing skills to design a T-Shirt for BRL-CAD. You can use the current BRL-CAD logo, or you may tweak it. Be creative while designing this T-Shirt. It would be good if the design has some special meaning.
+
BRL-CAD maintains a bibliography file that keeps track of published articles and reports pertaining to BRL-CAD, but it would be useful to have similar files that keep track of other topics. Broadly speaking, there are two ways to create and maintain a .bib file - one is manually (using any text editor) and the other is a GUI such as JabRef. The rule of thumb is generally to use the text editor approach when building a .bib file of references that are pre-packaged (such as those often provided by publishers of journal articles) and to use a tool like JabRef when you have to create the entire entry from scratch.  The output from each task would be a .bib file similar to BRL-CAD.bib in the doc directory.
  
Logo References
+
Code:
* http://brlcad.org/images/angelov_256.png
+
* doc/BRL-CAD.bib  (as an example of a .bib file)
* http://brlcad.org/d/node/92
+
 
 +
References:
 +
* http://jabref.sourceforge.net
 +
* http://en.wikipedia.org/wiki/BibTeX
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Design a coffee mug for BRL-CAD ===
+
=== ... NURBS.bib - Non-Uniform Rational BSplines bibliography file ===
 +
 
 +
Create a BibTeX file with the references contained in the bibliographies of these papers (make sure to include these papers as well as what they reference):
 +
 
 +
Practical Ray Tracing of Trimmed NURBS Surfaces
 +
http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.35.7126
  
This task involves designing a coffee mug for BRL-CAD. Make it look good, so that one can use it while working on BRL-CAD. Look over some great coffee mug designs before starting to work on this. It would be great if the design on coffee mug has some special meaning.
+
Direct and Fast Ray Tracing of NURBS Surfaces
 +
http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.90.7500
  
Logo References
+
Watertight Trimmed NURBS
* http://brlcad.org/images/angelov_256.png
+
http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.146.3590
* http://brlcad.org/d/node/92
 
  
 +
For this case, the best route is probably assembly of pre-existing .bib entries from either the citeseerx website or from the sites of the journal actually publishing the article.
 
|}
 
|}
 +
----
 +
 +
= Outreach and Research =
 +
----
 +
''Tasks related to community management, outreach/marketing, studying problems, and recommending solutions''
  
&nbsp;
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
=== Design BRL-CAD sticker ===
+
== Write solicitation for new website designer ==
  
This task involves designing a BRL-CAD sticker. The design should be simple and sleek. The concept of sticker should be clear and also it should be creatively presented. Get inspired from some sticker designs but choose your own imagination while designing the sticker. There is no bound for shape of sticker, it can be rectangular, circular or even irregular. The only thing that matters is that it should look good.
+
The BRL-CAD website is in need of a design overhaul.
  
Logo References
+
This task involves writing up a brief article soliciting new contributor(s) to work on designing a new website.  The article needs to be detailed and specific to our particular website requirements (Drupal+Mediawiki+CSS) to ensure the contributor can design the appropriate stylesheet(s), updated graphics, and new layout.
* http://brlcad.org/images/angelov_256.png
+
 
* http://brlcad.org/d/node/92
+
References:
 +
* http://brlcad.org
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Design BRL-CAD phone/tablet back cover ===
+
== Model new BRL-CAD Logo using BRL-CAD ==
 +
 
 +
The winner of the recent BRL-CAD Logo contest is a clean depiction of two interlocked components. Modeling the new Logo in BRL-CAD without using NURBS would require some careful arrangement, but would provide an attractive three dimensional rendering.
  
This task involves designing a BRL-CAD phone/tablet cover.  
+
The output of this task would be a .asc file of BRL-CAD geometry (converted via g2asc) for inclusion in the db/ example directory. Optimally, the two segments would overlap at the join, but this is your opportunity as an artist and 3D magician to shine with your interpretation.  
While submitting your design, provide the sample phone cover, tablet cover with the design and rendered png or jpg image of the sticker design. Try to have a special meaning of design, and the concept should be creatively illustrated.
 
  
Logo References
+
References:
 
* http://brlcad.org/images/angelov_256.png
 
* http://brlcad.org/images/angelov_256.png
 
* http://brlcad.org/d/node/92
 
* http://brlcad.org/d/node/92
 +
* Introduction to MGED at http://brlcad.org/wiki/Documentation
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Design a wallpaper set for BRL-CAD ===
+
== Write BRL-CAD News article on .deb/.rpm builds ==
  
This task involves designing a set of wallpapers for BRL-CAD. The central idea of each wallpaper should represent any feature of BRL-CAD. Try to design a minimum of 5 wallpapers but if you have more than 5 designs than you are welcomed.  
+
BRL-CAD has a new maintainer, Jordi Sayol, for managing .deb and .rpm buildsInterview the developer, obtain details on how the releases are produced, what platforms are supported, etc, and write up an article for our Community Publication Portal (CPP)
   
 
Try to different resolutions of each wallpaper.
 
  
Check the following wallpapers for inspiration.
+
The output of this task is an article added to our CPP wiki page in a final production-quality review state.
* http://www.smashingmagazine.com/tag/wallpapers/
 
  
Logo References
+
References:
* http://brlcad.org/images/angelov_256.png
+
* http://brlcad.org/wiki/Community_Publication_Portal
* http://brlcad.org/d/node/92
 
  
 
|}
 
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Write a BRL-CAD showcase article ==
 +
 +
BRL-CAD has several ongoing development activities developed by community members that showcase the power and applicability of BRL-CAD to various domains.  For this task, you'd be expected to interview one or more individuals to obtain information and pictures about their project, write up a descriptive overview of their model, the goals of the project, and any interesting ancillary information that may be relevant.  There are presently several candidate topics listed in our Community Publication Portal (CPP).
 +
 +
The output of this task is an article added to our CPP wiki page in a final draft review state.
  
 +
References:
 +
* http://brlcad.org/wiki/Community_Publication_Portal
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Create Iron Man Arc Reactor Model in BRL-CAD ===
+
== Design a "Commercial CAD Comparison" diagram ==
  
This task involves creating Arc Reactor as seen in hollywood movie Iron-Man. You will have to create two versions of the Arc Reactor one glowing and another non glowing.  
+
New users frequently ask how BRL-CAD compares to other major commercial CAD systems such as CATIA, Unigraphics/NX, Pro/ENGINEER, Solidworks, and AutoCAD.  BRL-CAD has many of the same features and it would be very useful to visualize the feature overlap graphically with a diagram.
   
+
 
Check this model for inspiration
+
This task involves identifying core significant features of relevance and describing BRL-CAD along with the various major CAD vendors. The diagram should fit on one page.
* http://grabcad.com/library/iron-man-arc-reactor-request
 
  
 +
References:
 +
* http://brlcad.org/Industry_Diagram.png
 +
* Example feature comparisons (although not a diagram): http://en.wikipedia.org/wiki/Comparison_of_3D_computer_graphics_software
 +
* Additional feature comparisons (also not a diagram): http://en.wikipedia.org/wiki/Comparison_of_CAD_editors_for_CAE
  
 
|}
 
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Investigate performance of setting thread affinity ==
 +
 +
BRL-CAD's raytrace library (LIBRT) is pervasively multithreaded using routines defined in our basic utility library (LIBBU) for detecting an using multiple CPUs/cores/threads.
 +
 +
This task involves making minor modifications to the LIBBU parallel interface using sched_setaffinity and/or pthread_attr_setaffinity_np (or similar affinity mechanism depending on the platform) and then evaluating the performance impact using our BRL-CAD Benchmark suite ('benchmark' command).
  
 +
Code:
 +
* src/libbu/parallel.c
 +
* src/libbu/semaphore.c
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Tweak BRL-CAD logo to wish New Year ===
+
== Determine why solids.sh fails on 64-bit ==
  
You might have heard and praised those google doodles we occasionally see on google.com on special days. This task is all about tweaking BRL-CAD logo to wish New Year. You may have a look at google doodles but don't entirely copy their style. I am sure your creative mind will get something much better.
+
BRL-CAD has a regression test script called solids.sh that creates a bunch of primitives, renders an image of those primitives, and then compares that image to a reference image.  On (most?) 64-bit platforms, the test is off by several RGB values for exactly 3 pixels.
Make sure this tweak should be tweaked version of current logo and not entirely new logo.
 
  
Tip: Search for some global events occurring in 2015 and design accordingly. Also keep the letters 2,0,1,5 in mind while designing. ;)
+
This task involves figuring out why, exactly, this is occurring. It may be helpful to compare intermediate computation results from a 32-bit environment to see where the computations diverge, however slightly.  Ultimately, the goal is to identify the cause and a recommended course of action to fix the divergence problem.
  
Also output of this task shall be the png file of your work and the raw file but don't upload the raw file(.psd, .xcf or some other) for review of this task. We will ask for it later, when the design is finalized.
+
Code:
 +
* regress/solids.sh
  
Gallery of all google doodles
+
|}
* http://www.google.com/doodles
+
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Investigate permuted vertex lists from g-iges + iges-g ==
  
 +
BRL-CAD has a geometry exporter and importer for the International Graphics Exchange Standard (IGES) file format.  If you run our g-iges exporter on some geometry, then run iges-g on that same geometry to import it back to BRL-CAD format, the geometry will have permuted vertex lists.  Particularly for geometry already in polygonal format, such as our NMG or BoT geometry, this conversion should result in identical geometry but presently does not.
  
|}
+
This task involves investigating why this occurs, reporting (in detail) why it occurs, and if obvious, making a recommendation on how to fix the problem.
  
 +
Code:
 +
* src/conv/iges
  
 +
|}
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Tweak BRL-CAD logo to wish Merry Christmas ===
+
== Investigate GMP integration ==
  
You might have heard and praised those google doodles we occasionally see on google.com on special days. This task is all about tweaking BRL-CAD logo to wish Christmas. You may have a look at google doodles but don't entirely copy their style. I am sure your creative mind will get something much better.
+
BRL-CAD uses a fastf_t typedef for most all math operations that is usually a "double" floating point type.  We would like to provide the option for resorting to exact arithmetic if possible by merely redefining fastf_t to a C++ type sufficiently overloaded to behave the same.
Make sure the output of this task should be tweaked version of current logo and not entirely new logo.
 
  
Also output of this task shall be the png file of your work and the raw file but don't upload the raw file(.psd, .xcf or some other) for review of this task. We will ask for it later, when the design is finalized.
+
This task involves testing compilation with a C++ class with overloaded operators such that vmath macro calls still work as well as a sampling of LIBBN API function calls without major changes to the original code.  A perfect example case study would be creating the class then testing whether bn_dist_pt3_pt3() and bn_mat_determinant() compute correctly for values that cannot be exactly represented with floating point arithmetic.
  
Gallery of all google doodles
+
References:
* http://www.google.com/doodles
+
* http://gmplib.org/
  
 +
Code:
 +
* include/vmath.h
 +
* include/bn.h
  
 
|}
 
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Research status of compiling BRL-CAD on MINGW ==
 +
 +
BRL-CAD compiles on a number of platforms but is rarely compiled under mingw.  A cygwin compilation was last successfuly performed a few years ago with relatively minor effort, but mingw hasn't been tested.
 +
 +
This task involves attempting to compile BRL-CAD under mingw (AFTER successfully compiling with MSVC).  Follow the CMake documentation and edit our build system accordingly.  Report on what fails and write up a tutorial on the BRL-CAD wiki.
 +
 +
References:
 +
* http://brlcad.org/wiki/
 +
* http://www.mingw.org/
 +
* http://www.cmake.org/Wiki/CmakeMingw
  
 +
Code:
 +
* CMakeLists.txt
 +
* misc/CMake/*
 +
|}
 
----
 
----
  
== Quality Assurance ==
+
= Quality Assurance =
 
----
 
----
 
''Tasks related to testing and ensuring code is of high quality''
 
''Tasks related to testing and ensuring code is of high quality''
  
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Fix single-precision floating point crash ===
+
== Fix single-precision floating point crash ==
  
 
By default, all of BRL-CAD compiles using double-precision floating point arithmetic.  We provide a simple typedef, however, that converts almost the entire system over to single-precision floating point.  This compilation mode was recently cleaned up and tested, but a bug was found.  The problem is reproduced very simply by compiling in single precision mode and running our "rt" ray tracer tool.
 
By default, all of BRL-CAD compiles using double-precision floating point arithmetic.  We provide a simple typedef, however, that converts almost the entire system over to single-precision floating point.  This compilation mode was recently cleaned up and tested, but a bug was found.  The problem is reproduced very simply by compiling in single precision mode and running our "rt" ray tracer tool.
Line 669: Line 1,086:
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Fix closedb ===
+
== Create geometry database with one of every primitive ==
  
BRL-CAD geometry editor application (mged) has several hundred commands including two very simple commands for opening and closing a geometry database file.  While the user rarely ever needs to close the file, as all changes are always immediately saved, it can be of use to scripting applicationsHowever, at some point in the recent past, the ''closedb'' command was horkedIt's undoubtedly something very simple but we haven't bothered to look due to other priorities.  You can fix it.  If you run these simple steps within graphical mged, you should see how commands stop working after calling closedb:
+
BRL-CAD implements 40 different types of 2D, 3D, and non-geometric objects that get stored in a ".g" geometry database file.  For numerous debugging and testing purposes, it'd be useful to have a database with all object types includedOur ''csgbrep'' procedural geometry database tool creates 21 of themOur ''mged'' geometry editor application lets users create them manually using the "make" and "in" commands via the command-line interface.
  
  mged> opendb test.g y
+
This task involves running the csgbrep to create a starting set of objects and then creating the remaining ones manually.  Provide a .g file that contains every possible object type.
  mged> make sph sph
 
  mged> l sph
 
  mged> closedb
 
  mged> make sph sph
 
  mged> opendb test.g
 
  mged> l sph
 
  mged> exit
 
  
Provide a patch that fixes the bug or tell us which SVN revision introduced the bug. Make sure you can reproduce the bug before claiming this task, which presumes you know how to download/install BRL-CAD from a source distribution.
+
References:
 
+
* http://brlcad.org/wiki/Documentation
Code:
+
* http://brlcad.org/wiki/EBM
* src/mged/mged.c
+
* http://brlcad.org/wiki/DSP
 +
* src/librt/primitives <-- lists all object types except comb, binunif, and attribute objects
 +
* csgbrep <-- creates half of what you need
 +
* mged <-- can create the other half
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Create a utility library (LIBBU) API unit test ===
+
== Create an utility library (LIBBU) API unit test ==
  
 
There are more than 300 library functions in our core LIBBU library.  As a core library used by nearly every one of BRL-CAD's tools, testing those functions for correct behavior is important.
 
There are more than 300 library functions in our core LIBBU library.  As a core library used by nearly every one of BRL-CAD's tools, testing those functions for correct behavior is important.
  
This task involves implementing new unit tests for any of LIBBU's source files that do not already have a unit test defined.  The test should run all of the public functions and be hooked into our build system.  We have lots of existing unit tests to follow as examples.
+
This task involves implementing a new unit test for any of LIBBU's source files that do not already have a unit test defined.  The test should run all of the public functions and be hooked into our build system.  We have lots of existing unit tests to follow as an example.
  
 
References:
 
References:
Line 711: Line 1,122:
 
* src/libbu/tests/CMakeLists.txt
 
* src/libbu/tests/CMakeLists.txt
  
 
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
|
 +
=== ... unit test for LIBBU argv.c ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... unit test for LIBBU avs.c ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... unit test for LIBBU backtrace.c ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
=== ... unit test for LIBBU badmagic.c ===
 +
|}
 +
&nbsp;
 +
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... unit test for LIBBU bomb.c ====
+
=== ... unit test for LIBBU bomb.c ===
 
|}
 
|}
 
|}
 
|}
  
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 
+
== Create numerics library (LIBBN) API unit test ==
=== Create Numerics library (LIBBN) API unit tests ===
 
  
 
There are more than 300 library functions in our core LIBBN library.  As a core library used by nearly every one of BRL-CAD's tools, testing those functions for correct behavior is important.
 
There are more than 300 library functions in our core LIBBN library.  As a core library used by nearly every one of BRL-CAD's tools, testing those functions for correct behavior is important.
  
This task involves implementing new unit tests for any of LIBBN's source files that do not already have a unit test defined.  The test should run all of the public functions and be hooked into our build system.  We have lots of existing unit tests to follow as examples.
+
This task involves implementing a new unit test for any of LIBBN's source files that do not already have a unit test defined.  The test should run all of the public functions and be hooked into our build system.  We have lots of existing unit tests to follow as an example.
  
 
References:
 
References:
Line 733: Line 1,162:
 
* include/vmath.h
 
* include/vmath.h
 
* src/libbn/*.c
 
* src/libbn/*.c
* src/libbn/tests/*.c <-- check this directory for examples
+
* src/libbu/tests/*.c <-- note libbu, not libbn for examples
* src/libbu/tests/*.c <-- Note: Also check this too for more examples.
 
  
 
Code:
 
Code:
Line 740: Line 1,168:
 
* src/libbn/tests/CMakeLists.txt
 
* src/libbn/tests/CMakeLists.txt
  
<b> Note </b>
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
A valid task will constitute writing a basic test for each function in the following libbn/ files.
 
 
 
{| cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
==== ... unit tests for LIBBN anim.c ====
+
=== ... unit test for LIBBN list.c ===
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 
+
=== ... unit test for LIBBN axis.c ===
*Useful resources
 
  ->coming!
 
 
 
==== ... unit tests for LIBBN axis.c ====
 
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... unit tests for LIBBN qmath.c ====
+
=== ... unit test for LIBBN complex.c ===
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 
+
=== ... unit test for LIBBN qmath.c ===
 
 
*Useful links and Resources
 
-> Coming!
 
 
 
==== ... unit tests for LIBBN rand.c ====
 
 
|}
 
|}
 
&nbsp;
 
&nbsp;
{| cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#222222;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
==== ... unit tests for LIBBN vector.c ====
+
=== ... unit test for LIBBN rand.c ===
 
|}
 
|}
 +
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Create a COMPREHENSIVE unit test for bn_dist_pt3_pt3() ==
 +
 +
There are more than 300 library functions in our LIBBN numerics library.  Creating a comprehensive unit test involves exhaustively exploring all possible inputs to the function, testing them for proper behavior, and characterizing the output in a PASS/FAIL fashion.
  
*Useful links and resources
+
Unlike the other testing framework tasks, the goal of this task is comprehensiveness.  The task must cover all possible inputs including NULL, -inf, +inf, NaN, real numbers, and other values in most if not all possible combinations.
-> To be added.
 
  
=== Find, reliably reproduce, and report any bug in Archer ===
+
Code:
 +
* include/bn.h
 +
* src/libbn/plane.c
 +
* src/libbn/tests/CMakeLists.txt
 +
* src/libbn/tests/bn_plane.c <-- you write this
  
Archer is our new modeling interface and a soon to merge with our long-standing MGED geometry editor.  It undoubtedly has bugs.  It's your job to find one, but do so in a manner that is so obvious that one of the other devs will be able to instantly reproduce the bug given your specific instructions.  Find a way to make archer crash, become unresponsive, or otherwise behave incorrectly.  You will have to explore the tool with minimal documentation.
+
|}
 +
&nbsp;
 +
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 +
|
 +
== Find, reproduce, confirm, and report any bug in Archer ==
 +
 
 +
Archer is our new modeling interface and a soon-to-be replacement for our long-standing MGED geometry editor.  It undoubtedly has bugs.  It's your job to find them, but do so in a manner that is so obvious that one of the other devs will be able to instantly reproduce the bug given your instructions.  Crashing bugs are best, but may require learning how to use the tool with minimal documentation.
  
This task involves filing a bug report with verifiable and reproducible steps that clearly demonstrate the bug.  It can't be a bug already reported or otherwise documented nor can it be merely behavior you don't like.
+
This task involves filing a bug report with verifiable and reproducible steps that clearly demonstrate the bug.  It can't be a bug already reported or otherwise documented.
  
 
References:
 
References:
Line 796: Line 1,224:
 
* BUGS file in any source/binary distribution
 
* BUGS file in any source/binary distribution
 
* http://sourceforge.net/tracker/?atid=640802&group_id=105292&func=browse
 
* http://sourceforge.net/tracker/?atid=640802&group_id=105292&func=browse
 +
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Reproduce any 10 unconfirmed open bug reports ===
+
== Reproduce any 10 unconfirmed open bug reports ==
  
BRL-CAD presently has approximately 75 open bug reports of which 50 are unassigned. Read the comments and status to see if the bug has been confirmed/reproduced. 
+
BRL-CAD presently has approximately 75 open bug reports of which 50 are unassigned.
  
This task involves going through those reports and REPRODUCE at least 10 of the ones that have not been confirmed.  When you can reproduce the issue being reported, you'll comment on the thread to state as much and attach any data you used to reproduce the crash.
+
This task involves going through those reports and REPRODUCE at least 10 of the ones that have not been confirmed.  Read the comments and status to see if the bug has been confirmed/reproduced.  When you can reproduce the issue being reported, you'll comment on the thread to state as much and attach any data you used to reproduce the crash.
  
 
References:
 
References:
* https://sourceforge.net/tracker/?limit=100&func=&group_id=105292&atid=640802&assignee=100&status=1&submit=Filter
+
* https://sourceforge.net/tracker/?limit=100&func=&group_id=105292&atid=640802&assignee=&status=1&category=&artgroup=&keyword=&submitter=&artifact_id=0&assignee=100&status=1&category=&artgroup=&submitter=&keyword=&artifact_id=0&submit=Filter&mass_category=&mass_priority=&mass_resolution=&mass_assignee=&mass_artgroup=&mass_status=&mass_cannedresponse=&_visit_cookie=56a22c83c2b1af8527d526e1da24a108
 
|}
 
|}
 
  
 
----
 
----
  
== User Interface ==
+
= User Interface =
 
----
 
----
 
''Tasks related to user experience research or user interface design and interaction''
 
''Tasks related to user experience research or user interface design and interaction''
  
 
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
&nbsp;
 
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
 
|
 
|
=== Create an ISST screenshot or animation ===
+
== Design an MGED command spreadsheet ==
  
Everyone loves to see screenshots and animations of software in action. We use both in our marketing and outreach. See some of the examples below that we already have.
+
BRL-CAD's primary solid geometry modeling application is called MGED.  MGED contains a comprehensive set of more than 700 commands for manipulating, viewing, and inspecting geometry. There is a need to more effectively manage those commands, characterize them all, and get a "big picture" of the command landscape so that usability may be addressed.
  
Create an awesome screenshot and/or animation of our 'isst' tool in action. It's an interactive geometry viewer interface.  It should be graphically interesting and give some sense of capability.  You should import a visually complex and interesting model with LOTS of polygons and detail.
+
This task involves designing a spreadsheet that will be used to characterize all of MGED's commands.
  
 
References:
 
References:
* http://brlcad.org/gallery/d/19-4/MGED.jpg
+
* An existing spreadsheet already being used for BRL-CAD (i.e., non-MGED) commands is available.
* http://brlcad.org/tmp/archer.png
 
* http://brlcad.org/gallery/s/screenshots/
 
* http://www.google-melange.com/gci/task/view/google/gci2012/8019211
 
 
 
Note that we have several screenshot tasks.  Note you may have to go through some or our basic MGED tutorials (see docs section on our website) just to be able to display geometry. Finally, give others a chance if you already completed one of the other screenshot tasks. ;)
 
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Categorize all of BRL-CAD's commands into a spreadsheet ===
+
== Create prototype 2D CAD drawing(s) ==
  
BRL-CAD is a suite of more than 400 processing tools, image tools, geometry converters, and more. There is an existing spreadsheet that characterizes all of the available commands in terms of inputs, outputs, and options, but there is insufficient characterization of BRL-CAD's commands as to how they logically group and work together.
+
BRL-CAD provides limited services for drafting features including the production of 2D CAD drawings (blueprints).
  
This task involves building up a spreadsheet that lists all of our commands, describing a finite set of command categories, and characterizing all commands into those categories while filling in the spreadsheet with details for each command.
+
This task involves designing a 2D CAD drawing prototype that effectively captures a set of design requirements and follows industry conventions.  Basically, this requires identifying one or more style(s) of drawings that should be supported along with critical elements to be included on each drawing.
  
 
References:
 
References:
* A spreadsheet template will be provided.
+
* http://brlcad.org/design/drafting
 
+
* http://en.wikipedia.org/wiki/ISO_128
 +
* http://en.wikipedia.org/wiki/ASME_Y14.41-2003
 +
* http://en.wikipedia.org/wiki/Geometric_Dimensioning_and_Tolerancing
 +
* http://www.ptc.com/WCMS/files/45691/en/4307_FoundationXE_DS.pdf
 +
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
===  Design a Cover Photo for Facebook page (and other social networks) ===
+
== Create prototype CAD GUI layout diagram ==
  
BRL-CAD got it's logo changed, and it's website is undergoing a change. So this re-branding of BRL-CAD also requires a good, well designed and attractive cover photo for the BRL-CAD's Facebook page or other Social Media Appearances. It should feature a good tagline telling some killer feature of BRL-CAD, BRL-CAD's new logo and/or some illustration/image regarding the feature highlighted in tagline.
+
BRL-CAD's usability is notoriously complex and "expert friendly". MGED and Archer are the main geometry editors, with drastically different user interfaces.
  
It should be consistent with the color scheme of our new website design.
+
This task involves evaluating the features provided by MGED and Archer, then designing a new GUI layout that encompasses their features while improving usability.  Rationale for design decisions and layout should be provided.
  
New website design
+
References:
*http://cpp-tricks.com/brlcad/
+
* http://brlcad.org/design/gui
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
 +
== Reorganize MGED menu ==
  
===  Design a banner ad for BRL-CAD ===
+
BRL-CAD's main graphical user interface, MGED, is heavily menu-driven but not exceptionally well organized.  This task involves performing an exhaustive review of MGED's various menus, including temporary menus when in a given editing state, reorganizing them for logical groupings, and rewording them for clarity.  It's necessary to learn the basics of the MGED interface in order to understand what the various options do.
  
BRL-CAD is one of the oldest open source communities. This community has a good following, so we want to give a chance to everyone so that they can show their support to the community by adding a banner ad in their website. You have to create a banner ad that can be embedded in the website by copy pasting some simple lines of code (basically an iframe).  
+
For this task, you'll provide a description of the existing menus and mapping to a new organization including basic rationale behind any new groupings or rewording.  
  
Such a banner ad can also be used in various sections of our own website.
+
References:
 
+
* Introduction to MGED at http://brlcad.org/wiki/Documentation
The task requires you to create a CSS3 based animated horizontal and vertical banner add, highlighting some feature of BRL-CAD or making some call to action. This call to action can be joining mailing list, or signing up for community, or link to latest post etc.
 
 
 
For Inspiration and tutorial refer
 
*http://tympanus.net/Tutorials/AnimatedWebBanners/
 
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Creating Motion Typography video for BRL-CAD ===
+
== Categorize all of BRL-CAD's commands into a spreadsheet ==
  
BRL-CAD has a lot of great features that can be highlighted. A motion typography video highlighting these features would be a wonderful addition to the front page of website.  
+
BRL-CAD is a suite of more than 400 processing tools, image tools, geometry converters, and more.  There is an existing spreadsheet that characterizes all of the available commands in terms of inputs, outputs, and options, but there is insufficient characterization of BRL-CAD's commands as to how they logically group and work together.
  
This task requires you to create a motion typography video that will convince user to give BRL-CAD a try, it could be titled something like "x reasons to choose BRL-CAD" or anything similar (give your creative minds a flight). The video should not be more than 2 minutes.  
+
This task involves building up a spreadsheet that lists all of our commands, describing a finite set of command categories, and characterizing all commands into those categories while filling in the spreadsheet with details for each command.
  
For inspiration about what a motion typography, see
+
References:
*http://vimeo.com/24715531
+
* A spreadsheet template will be provided.
  
 
|}
 
|}
 
 
&nbsp;
 
&nbsp;
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
+
{| style="background-color:#666666;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
|
=== Create a screen-cast for BRL-CAD  ===
+
== Template example title ==
  
Getting started with BRL-CAD is sometimes not so smooth. A screen-cast giving a tour of BRL-CAD's GUI and the steps involved in creating the first model will make it easy for users to get started.  
+
This is a template for mentors adding new ideas.  Brief background information not specific to the task is listed first. It's succinct.
  
For this task you need to install BRL-CAD on your computer. Create a very basic model in it and record your screen as you create the model. It should also give a tour of BRL-CAD's workspace. You can choose model of your choice. Keep something very basic and easy for the first time users.  
+
This task involves ... the rest goes here. Remember, less than two hours expected for average or random contributor to do the work after reading this description. The resulting task should be directly measurable without subjective interpretation. Tell them exactly what they need to do. Be specific.
 
 
|}
 
 
 
 
 
&nbsp;
 
{| style="background-color:#ffffff;" cellpadding="20" cellspacing="0" border="2" width="100%"
 
|
 
=== Loading Google charts from API  ===
 
 
 
A basic wrapper of GCharts has been implemented a while ago : https://bitbucket.org/suryajith/benchmark/src/a27dd8c05d6819a527650e06a63076599d2e0d66/libs/charting.py?at=default With the google charts improving their API system which wasn't around then, see if the code could be optimized so to get the charts the optimal way.
 
 
 
Reference:
 
*https://developers.google.com/chart/interactive/docs/index
 
  
 +
References:
 +
* optionally list any url's that provide relevant background information
  
 +
Code:
 +
* list any files you know they will need to read/edit
 
|}
 
|}
 
=== Design a hall of fame for BRL-CAD developers ===
 
 
We love our developers and want to have a special place in it's website to thank and motivate hard working folks behind BRL-CAD. Your task would be to use an image manipulation software such as GIMP or Photoshop and design a hall of fame page for developers. It should have avatars and names of all the developers. For inspiration you can take a look at http://underscores.me/. You are free to experiment and design anyway you want, just make sure that the color scheme and font-scheme is consistent with the new BRL-CAD web design.
 
 
Links:
 
* http://cpp-tricks.com/brlcad/
 
* http://underscores.me/
 
 
 
|}
 
----
 
 
= When You're Done =
 
----
 
 
For non-code, just send us your file(s).  For code changes, you will be expected to [[Patches|provide a patch file]].  Make sure you ''read'' your patch file before submitting it.  Make sure your patch file will apply cleanly to an unmodified checkout of BRL-CAD:
 
 
svn co https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk brlcad.edit
 
cd brlcad.edit
 
# make changes
 
svn diff > ~/my.patch
 
# read ~/my.patch file with text editor
 
cd ..
 
svn co https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk brlcad.fresh
 
cd brlcad.fresh
 
patch -p0 < ~/my.patch
 
# submit your patch file to our patches tracker
 
&nbsp;
 

Please note that all contributions to BRL-CAD may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see BRL-CAD:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)