Building from SVN
Obtain the sources
BRL-CAD has recently switched from CVS to the Subversion system. In the new system some of the earlier complexities inherent to CVS are gone, no -dP option is required and
svn checkout https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk brlcad
Note: If you do not yet have an SVN client installed, go to http://subversion.tigris.org for information on obtaining an appropriate SVN client for your platform. Most modern Linux distributions will also have SVN available in their package repositories.
Generate the configure script
cd brlcad ./autogen.sh
If autogen.sh reports that the build system is NOT ready and it's not clear why, rerun autogen.sh in verbose mode:
For example, if you're running Ubuntu and you don't have autoconf installed, you may need to run the command "sudo apt-get install autoconf", and then try to run autogen.sh again. You may need to also install "libtool" or some other package.
An example generating the configure script on Mac OS X
You need to do " sudo port install libtool" to get GNU version of libtool.
imac:brlcad username$ sudo ln -s /usr/local/bin/glibtoolize /usr/bin/libtoolize Password: imac:brlcad username$ ./autogen.sh Preparing the BRL-CAD build system...please wait Found GNU Autoconf version 2.61 Found GNU Automake version 1.10 Found GNU Libtool version 1.5.26 Automatically preparing build ... done The BRL-CAD build system is now prepared. To build here, run: ./configure make imac:brlcad username$
Configure the build system
./configure --help ./configure --prefix=[install_dir] --enable-optimized --enable-all
When building for multiuser file servers it is often useful to make the install_dir reflect the version and/or architecture of the compile. An example would be "--prefix=/usr/brlcad/rel-7.20.2" to install into a /usr/brlcad/rel-7.20.2 directory. This way a single system can have multiple versions of BRL-CAD installed or multiple binary formats for various architectures if installing on a network file system. Symbolic links are then usually added to point to the "current" or "main" version that is preferable to provide so that users only need to add /usr/brlcad/bin to their path. Examples include:
- By version
- /usr/brlcad/rel-7.8.0 (release 7.8.0)
- /usr/brlcad/rel-7.6.0 (release 7.6.0)
- By architecture
- /usr/brlcad/ia32 (linux on Pentium)
- /usr/brlcad/ia64 (linux on Itanium)
- /usr/brlcad/x86_64 (linux on Opteron)
- By version and architecture
- /usr/brlcad/rel-7.8.0/mips32 (IRIX on MIPS in 32-bit mode, release 7.8.0)
- /usr/brlcad/rel-7.8.0/mips64 (IRIX on MIPS in 64-bit mode, release 7.8.0)
- /usr/brlcad/rel-7.8.2/mips32 (IRIX on MIPS in 32-bit mode, release 7.8.2)
IMPORTANT!!! - Because BRL-CAD has such a long development history, it predates some library naming conventions in modern operating systems. This means an attempt to configure for an install in the "/usr" path on Linux (for example) will stand a good chance of damaging important system libraries - e.g. BRL-CAD libraries put in "/usr/lib" may overwrite system libraries with the same names. Using "/usr/brlcad" or "/opt/brlcad" means all installed files will be safely contained in the brlcad directory.
Compile and test your build
At this point, you should have a fully installed and working system. You can test things by doing:
make test make benchmark
Both the test and benchmark should report successfully if everything is working correctly. Report any failures to the BRL-CAD bug tracker.
If you created a prefix as described above for multiple versions or multiple architectures, you should now create your symbolic links for user convenience and consistency. Example where /usr/brlcad/rel-7.8.0/mips32 was used as the install_dir prefix:
% ln -s rel-7.8.0/mips32 /usr/brlcad/stable % ln -s stable/bin /usr/brlcad/bin % ln -s stable/include /usr/brlcad/include % ln -s stable/lib /usr/brlcad/lib % ln -s stable/man /usr/brlcad/man % ln -s stable/share /usr/brlcad/share % ls -l /usr/brlcad total 48 lrwxr-xr-x 1 root wheel 10 12 Apr 09:00 bin -> stable/bin lrwxr-xr-x 1 root wheel 14 12 Apr 09:00 include -> stable/include lrwxr-xr-x 1 root wheel 10 12 Apr 09:00 lib -> stable/lib lrwxr-xr-x 1 root wheel 10 12 Apr 09:00 man -> stable/man drwxr-xr-x 7 root wheel 238 11 Apr 18:00 rel-7.8.0 lrwxr-xr-x 1 root wheel 12 12 Apr 09:00 share -> stable/share lrwxr-xr-x 1 root wheel 9 12 Apr 09:00 stable -> rel-7.8.0/mips32
Future versions of BRL-CAD may provide this symbolic link operation for you as a configure option. Keep an eye out in the configure --help output.
Setup environment (optional)
At this point, everything should be ready for use. If the default prefix of /usr/brlcad was used or if the corresponding symbolic links were created, users should only need to add /usr/brlcad/bin to their PATH in order to find binaries for the package (optionally setting their MANPATH as well):
export PATH=/usr/brlcad/bin:$PATH export MANPATH=/usr/brlcad/man:$MANPATH
set path=( /usr/brlcad/bin $path ) setenv MANPATH /usr/brlcd/man:$MANPATH rehash
If users do not want to modify their PATH, they can get by providing the full path to the binaries (e.g. /usr/brlcad/bin/mged). To find BRL-CAD manual pages without setting your MANPATH, use the provided "brlman" binary instead of "man".
If everything went well, there should now be more than 400 command-line applications at your disposal for processing images and geometry. A quick test of functionality (and performance) is to run the BRL-CAD benchmark again, which is installed as the benchmark tool:
Additionally, you can run the MGED solid modeler: