Ali Haydar Dev log
Community Bonding Period
- setting up the environment installing ubuntu in dual boot and rebuilding the project in windows and ubuntu
- working on bugs:- the annotation is pointing to the origin fixed and patch submitted the drawing of numerical annotation results in no annotation working on it and notice that after constructing the numerical annotation you can't draw anything in the graphical screen until writing the Z command in MGED or reopening the database.
- using the code to modify the Vlist to draw a box around the label it is like a hack, not a real function just an experiment, it makes me realize that the label drawing should not start from the reference point but a little bit further so the box doesn't touch the label.
- contacting with the mentors and asking about there opinions.
This page is will be edited to include what I've learned so far and served as a log for the coming development.
- May 27 start reading the annotation code and trying to understand the problem in the opengl depiction in Wgl and ogl display managers
- May 28-29 failing to have any result with OpenGL and keep trying the logic exists in dm-X display manager but I am failing to copy it with OpenGL functions. the program is using OpenGL in immediate mode.
- May 30 learning how to manipulate vector lists
- May 31 the annotation vlist is complete when it exists in drawVlist() function in dm-wgl.c starting from the third point we can obtain the coordinates to the label vlist and use them to construct the box around the label
- June 1 learning opengl immediate mode the projection wanted by the society is like the one produced by Glortho() but it is not giving the wanted results
- June 2 working on the short annotation bug when you have a short annotation like one number or one letter it is not drawn in the graphics window one fix suggested by a fellow programmer is commenting the line 79 in vlist.c but this fix isn't approved by the society.
- June 3 write the function ant_label_box() which draw the box around the annotation it was good but we have to optain a pointer to the segments inside the annotations and decide which segments have a box around it and which is not
- June 4 one day off didn't do anything just read some code.
- June 5 reading how the properties of line seg and text segment are entered and read by the annot_in function
- June 6-9 structural dynamics exam didn't do much. and didn't pass the exam :(
- June 10 I am working on the short annotations bug starting in bn_vlist_bbox() we will see what happen today and update.
June 10 the solutions I proposed is not accepted because it is changing the calculations of the bounding box for lines and triangles
- June 11 trying another approach in solving short annotation problem which is another way of calling bn_vlist_bbox() in bound_solid() may be changing the matrix flag in cmd=15 to cmd=12 so the annotation is treated as one point which is the point that is in model coordinates not in display coordinates.
- June 12 submitted a patch to solve the short annotation problem but it didn't solve the long annotation problem because of the long annotation vlist hase multiple chunks.
June 12 trying to add a third segment to the annotation static one defined inside annot_in() with its parameters to see if it will be converted correctly to vlist.
- June 13 the patch was good and I submitted another one to solve the problem of bbox() in long annotations when the annotation vlist is constructed from more than one chunk the display mode is not memorized thought the iterations
- June 14 I managed to draw a circle segment between the annotated point and the reference point replacing the text segment by a carc segment I am working on the entring logic for three segments of the annotation.
June 14 now the annotation contains three segments a leader line, text, and static arc segment I defined it inside the annot_in() function. the annotation is imported correctly and all the segments are converted correctly to vlist.
- June 15 working on the problem of the bounding box, the solution is to change the bbox() function
- June 15 prompt the user if he wants a carc segment in his annotation it seems like the annotation construction will be so hard on the user
- June 16 send the patch of the new bbox() function it needs some modifications
- June 16 the society suggested making an annotation editor using the existing code of sketch editor so I am learning tcl/tk
- June 17 added the annot choice in creat menu and found where to assign the callbacks for classes in tcl/tk script which is done using auto_mkindex command and creats a script called tclindex.tcl
- June 18 after copying the sketch_editor class in skt_ed.tcl and make annot_editor class the menu button still not recognizing the annotation, maybe this is happening because the mged_make() function doesn't now about the annotation so know we will make them meet each other :).
- June 19 made some changes on the new bbox() function, the annotation editor is working now but failing to save the annotation,
- June 20 the error in saving the annotation was in the function which writes the annotation to the database
- June 21 the new bbox() function is accepted solving all the problems, now I am working on modifying the Gui of the annotation editor
- June 22 facing a problem with drawing a line to the same point from the annotation editor and from the in command
- June 23 made the user able to enter the annotated point and store it in V which will be the origin of coordinates to draw the hall annotation
- June 24 the annotation editor stores the chosen vertex twice I don't know why. still working on the Gui to make the user able to enter the label of the annotation and the text placement coordinates work going very slow the placement of the widgets in the window is making me crazy.
- June 25 now its the time to make a method to create the txt segment in tcl script but whenever I add a new method to the script the whole editor goes down.
- June 26 submitted the patch for the bbox() it is correct but contains a lot of mistakes in the indents and white spaces, I am working on making a unit test for the code I wrote.
- June 27 reading the unit tests in bn library it appears there is a file called bn_test.c which calls the test functions and it exists in the configured project I.e the build file you generate using Cmake , I have added the test file that I will write in, to the list of bn_test_srcs in cmakelist in test file of libbn .
- June 28 still working on the unit test program the main function is automatically generated based on the test file name, I have added the tests also to the cmakelist file the program will test the bn_vlist_cmd_cnt() function in vlist.c which returns the number of commands in a vlist so we have to invent a list and send it to the function to see if it works properly.
- June 29 the vlist is a doubly liked list so we have to obtain a head for the list and start adding elements I am thinking to put a for loop which adds points to the vlist depending on the test command in cmakelist file I will use RT_ADD_VLIST macro on the created head to add points to the list. also worked a little on the annotation editor but still not good the new methods I add breaks the hall script I don't know why. at the end of the day the test file works and the main function is called correctly from bn_test program.
- June 30 I have a problem building the test program because of using RT_ADD_VLIST the error is unresolved external RTG which is from the type rt_g defined in global.h, maybe it is a link error to librt, because I noticed that the RT_ADD_VLIST macro works in files which is existed inside librt maybe I am wrong ,
- July 1 the same link error still keeping me from going ahead I tried to define rt_g RTG; object inside the test file and the build is okay but when executing the macro the program get BU_ASSERT error I don't know why I asked the mentors to learn me how to link to librt and i tried a solution by making a function inside annot.c to add the points to the vlist now my new function is the unresolved external object.
- July 2 the same link error we linked librt to the test file the function works but when you use RT_ADD_VLIST inside it you get the BU_ASSERT error and when using RT_ADD_VLIST inside the test program you get the unresolved external error when building the code.
- July 3 found the solution by adding two lines to the test program which is 1- rt_g RTG; 2- BU_LIST_INIT(&RTG.rtg_vlfree); this solution is you need a free list to use the vlist which I learned in a hard way wasting 3 days searching online how to link a library to your code in cmake system.
- July 4 rewrite the test file and adding all the expected cases of the function like Null pointer to no list and very long list. I have sent the file to the society to get opinions about the whole operation I think I finished it. Now looking to the bugs in the annotation we can notice that the annotation label is presented in the top-right position no matter what the position flag is I am working on this now and asked for the mentors to revise the goals of the project because the annotation editor is written in tcl/tk which will not be used in the new GUI this will make me do a lot of things that will not be useful. also, I have an exam on the 9th of June.
- July 5 I couldn't do anything due to some problems in my sleeping schedule.
- July 6 I found a bug in the annotation behavior which is the position of the label doesn't change whatever the user chose from the position flags I am working on this and I have sent a suggestion for a partial solution.
- July 7 managed to make the case of the bottom right
- July 8 I am preparing for structural dynamics exam tomorrow didn't do much I know I have to calculate the length of the label in the annotation.
- July 9 I had an exam. didn't do much
- July 10 I made some changes on the test program bn_test.c.
- July 11 I found a way to calculate the dimensions of the label in the annotation by calling the function which converts the string to a vlist bn_vlist_2string() considering that the reference point is the text placement point.
- July 12 working on the positions, the mentor's opinion is that the position flag should be related to a point of the text not related to the leader line but I think in this case it happens to be the endpoint of the leader line is the same point of the text placement
- July 13 still working on the positions flage the function rt_pos_flag() always returns the value top-right I fixed it and now I think it is manageable to construct all cases
- July 14 I managed to construct all the cases of the positions flage
- July 15 still the discussion of position flag and I am working on making a new annotation type which is dimension line I am thinking of using the same primitive and prompt the user for the tow points of which the dimension line will exist. I fell very sick and I am planning to go to the hospital
- July 16 I made the dimension line and send it to the mentors to see what they think
July 16 the mentor's said this approach will not work because the line had to be in model space and its label in display space I don't know how to solve this issue, I think the line should have its own vlist and the label also and each one should have different projection matrix
- July 17 I was in the hospital and had minor surgery. the doctor told me you can set on the chair after tow days ): .
- July 18-19 I didn't do any thing.
- July 20 I am back to work I will fix the patches and try another approach for the dimenison line .
- July 21 I managed to keep the label of the dimension line in the display space and the lines in model space but the result is not good yet
- July 22 the solution for the dimension line is not accepted, now I will try to modify the annotation primitive and add more refrance points to the text segment and see what will result, before that I will try another approach
July 22 now it works the label of the dimension line is in display space and the lines are in the model space, waiting for the society opinion.
- July 23 now I will work on the text of dimension line, size, rotation angle, and placement flags.
- July 24 still working on the dimension line I have modified the txt_seg but the new attributes (txt size, rotation angle) are not passed to the database I think I have to modify the export and import functions and the function which describe the annotation.
- July 25 still struggling with exporting the txt_seg after adding the text size and rotation angle.
July 25 I fixed the error in importing and exporting the annotation but still, there is an error in the label
- July 26 working on the dimension line
July 26 as the current dimension line is not bad it could be used to make a dimension line for a 3d object by changing the verts to 3d points (fastf_t *pointp_t) and this is not a problem for the vlist because it is already can hold a 4d point I will see what the mentors say about that
- July 27 the dimension line in its current state is not accepted I will fix the position flag patch and the test program and get back to the dimension line.
- July 28 took one day off.
- July 29 I am working on the position flage patch and extending the text segment structure .
- July 30 submitted a patch for fixing the position of the annotation based on the position flags and a patch to extend the text segment structure in the annotation to have a text size and text rotation angle parameters
- July 31 trying a new approach for the dimension line by adding a 3d verts to the annotation primitive which will be existed along with the 2d verts and will be used if the point index is negative. and trying to reproduce a bug in the l command when used with the annotation.
- August 1 after extending the text segment the old annotations doesn't work anymore I am trying to make it compatible
- August 2 there was some mistakes in the annotation's position flag patch I fixed them and I am working on a bug in the extended text segment structure and another one in the L command
- August 3 fixed some previous errors in my code and still trying to find the problem in L command the problem is it works some times and some times don't even with short and long labels.
- August 4 still unable to find a solution for importing the old annotation that doesn't contain a text_size and text_rotation angle in its structure because I didn't find a way to distinguish between the old one and the new one. also no result for the l command bug
- August 5 I found a way to import the old annotation properly by reorganizing the order of pointers but as we know the old annotation doesn't contain the new parameter so they will be random values from the database, as I am playing by the import function the l command bug some times appear when I change somthing related to the label so the solution for both problems will be probably in the import function
- August 6 there is some progress in the l command bug it is due to the exporting of label.vls_str structure the vls_len and vls_max has incorrect values but still doesn't know how to fix it
- August 7 still stuck in the same problems, my findings are we are exporting the bu_vls structure which is the annotation label as a structure I don't know why the importing function assumes that it will import the string separated from vls_offset,vls_len,vls_max
- August 8 I think this will be a solution for both problems the compatibility issue and the l command bug because the text segment is exported correctly but the import operation is not correct in my opinion I am still searching for a solution.
- August 9 I found a solution which is importing the bu_vls as a whole by using bu_vls_strcpy() function and counting for the null terminator in the increment of the external buffer pointer this solves the l command bug.
- August 10 I am working on extending the annotation structure to include 3d verts and waiting to see the society opinion of the l command fix.
- August 11 by extending the text segment and using the solution of exporting the bu_vls as a whole it is compatible with the old version of the annotation.
- August 12 the L command fix is correct and it needs more work on the size allocated in the exporting function and adjusting the import4 and export4 functions working on that. also, the position adjustment of the annotation is good.
- August 13 I am back to the dimension line and 3d verts I will see what I will get today.
- August 14 I fixed some errors in previous patches and working on adding the 3d verts I have a problem with importing them the Z coordinate is always zero.
- August 15 I fixed importing the 3d points and send a patch to see if we can use it in dimension lines.