Community Publication Portal

From BRL-CAD
Revision as of 01:15, 9 February 2011 by Sean (talk | contribs) (→‎Sean Morrison: Release 7.18.2: expand, reorganize, and reword accordingly)

Welcome to the BRL-CAD community publication portal. This page is dedicated to the preparation and editing of community publications for BRL-CAD. Proposed and upcoming publications are listed with their individual editorial status. You are welcome and encouraged to help share news about recent events or current activities taking place within the BRL-CAD community by writing an article. Community editing is welcome.

Formatting & Editing Standards:

  • Beginning quotations are italicized and placed between double quotes (wiki formatting requires 2 single quotes, space, double quote to achieve this)
  • All acronyms need to be defined (Like This) upon first use; further use can use the acronym only
  • Titles and Section Headings are bold (achieved by placing text between three single quotes); each should be Title Case (Meaning UpperCase the Major Words)
  • Use the serial comma. One, two, and three; not one, two and three.
  • Prefer first person for release notes, third person for everything else.
  • Do not abbrev. words.
  • Cite references and/or include hyperlinks.
  • Keep it brief.

Distribution Channels:

For release publications, follow HACKING. For everything else, distribute to the following:

Ready for Publication

These are articles ready for publication. Release notes should follow a release and get published within the first week of the month. Other publications should be scheduled one or two weeks later, ideally on the third week of the month.

Note: if you see a comment indicating that a section is FROZEN, any changes you make in that section may go unnoticed as the article is being prepared for distribution. If you find errors in a FROZEN article, go ahead and correct the article but contact Sean (brlcad on freenode IRC) who may be able to incorporate changes during final publication.

Final Editorial Review

These should be "complete" articles. The author is done with the content and all that remains is a review of structure, grammar, voice, punctuation, and spelling. Images may be added as well.

Sean Morrison: Release 7.18.2

We are delighted to announce the availability of BRL-CAD 7.18.2! The biggest change provided in this release is initial support for reading some older (platform-dependent) binary v4 geometry database files regardless of their originating platform. While our current (platform-independent) v5 geometry file format has been the default since release 6.0 in 2002, there are numerous v4 files in prevalence that could only be read on a matching platform. Binary-incompatible v4 geometry database files can now be opened read-only within MGED where geometry can be inspected, drawn, exported via the "keep" command, and updated to the newer format via the "dbupgrade" command. In order to override the otherwise automatic binary-incomaptible v4 detection, MGED's "opendb" command provides a new -f flip option and all applications can override behavior with a LIBRT_V4FLIP environment variable.

MGED receives several changes in this release including fixing a bug that was causing text edit commands such as "ted" to fail. MGED will now also display attributes sorted by name for improved readability. Also introduced are numerous binary platform integration and usability enhancements for Debian, Ubuntu, Fedora, and other Linux platforms. Included in Jordi Sayol's porting efforts are new desktop icons, menu items, mime-type association, and more. Other bug fixes, enhancements, and changes since release 7.18.0 include:

  • improved Fedora platform support with new menus, icons
  • fixed nirt units command reporting all units as invalid
  • dbupgrade support for binary-incompatible v4 files
  • new opendb -f endianness flip option for corrupt v4
  • new mime-type geometry association for Debian platform
  • improved Debian platform support with new menus, icons
  • improved mged 'ls' command support for v4 databases
  • dbconcat supports title, units, & color table import
  • 'tree -a' command lists object attributes
  • fixed Mac build failure running asc2g before install
  • fixed g_diff color table difference false positive
  • fixed asc2g color table bug parsing 'color' lines
  • 'attr show' command displays attributes sorted by name
  • fixed ted command to work using new editor support
  • fixed uninstalled text editor invocation bug in mged
  • support for comment lines at beginning of .asc files
  • disabled adrt_master and adrt_slave tools
  • ported pixblend image processing tool to Windows
  • upgraded libpng to version 1.4.5
  • upgraded zlib to version 1.2.5
  • removed shell execution ! command from vdeck

Special thanks go out to all of our contributors for this release including Jordi Sayol, John Anderson, Tom Browder, Daniel Roßberg, Erik Greenwald, Cliff Yapp, and Sean Morrison. This is a backwards-compatible release.

Please visit the Sourceforge project website to download the latest version: http://sf.net/projects/brlcad See the BRL-CAD website at http://brlcad.org for more information.

Kyle Bodt: Ronja

http://brlcad.org/wiki/Ronja

Ronja (Reasonable Optical Near Joint Access) is an innovative piece of equipment that utilizes reliable optical data links to create a current communication range of 1.4 km and a speed of 10Mbps full duplex that can be used as a general purpose wireless link for virtually any networking project. This is a very important project for Twibright Labs, a small group of computer science graduate students operating out of Charles University in Prague in the Czech Republic. The group specializes in the usage of Free Software and User Controlled Technology Development.

The primary output for the Ronja project is a design. The lab does not intend to manufacture and sell the hardware that is being designed but wants to engage in open source development of the technology. The philosophy surrounding User Controlled Technology is the ideal that the end-user is provided with unrestricted access to the intellectual property surrounding the technology, including the tools that are being used to create it. One tool playing an integral part in the development of the Ronja designs is BRL-CAD. All of the models that Twibright labs use to display the different variants of their Ronja concept were created with the help of BRL-CAD. BRL-CAD has allowed the members of Twibright labs to create instructional diagrams so that the users and builders of their open source technology will be able to have the latest information with regard to the proper construction of a Ronja unit. The interactive geometry editor and ray-tracers in BRL-CAD are an integral part in the communication of design plans for Twibright labs and enables them to connect with the users, who are the driving force behind the User Controlled Technology ideal.

Initial Drafts

These are incomplete articles being worked on. Most articles should be between 250 and 500 words (not counting tables, labels, and diagrams) before they have enough content to be considered complete.

Cliff Yapp: NURBS Ray Tracing in BRL-CAD

Over the past year, an intense development effort by BRL-CAD's development team has successfully implemented raytracing of Non-Uniform Rational BSpline (NURBS) geometry within the BRL-CAD Computer-Aided Design (CAD) package. NURBS surfaces are very general, very complex mathematical shapes used by virtually all modern commercial CAD software packages. Because BRL-CAD did not originally support this type of geometry, commercial models could only be imported into BRL-CAD after a labor-intensive and difficult conversion process from NURBS form to triangle-base geometry (referred to in BRL-CAD as Bags-of-Triangles or BoTs). The new NURBS raytracing capability builds on work by many developers over a period of years, who in turn built on the open source library OpenNURBS. Support for this primitive type means BRL-CAD can now store and raytrace data from commercial models without requiring preliminary conversion to another type of geometry.

The last major feature needed to make import of commercial models in BRL-CAD straightforward is conversion support for ISO’s "Standard for the Exchange of Product model data" or STEP file format. STEP uses NURBS geometry in its definition, making support for NURBS geometry a necessary prelude to support for STEP import. Most commercial CAD modelers support this file format as an output option, hence STEP support in BRL-CAD would allow a direct path for moving geometric descriptions from a variety of commercial modelers to BRL-CAD. Considerable progress has already been made on STEP import support, but more work is need to bring the code and feature set to "production quality". If anyone would like to join the BRL-CAD open source development effort and has a little familiarity with C++, the step-g converter and its supporting libraries have some simple-yet-useful tasks that would be an excellent and very useful way to explore the project - join BRL-CAD's IRC channel or development email list if you are interested!

Erik Greenwald: Bolting ADRT's libtie under the hood

BoT vs Tie pixdiff

Initial progress on the integration of ADRT's libtie "triangle intersection engine" with LIBRT.

Idea Hopper

These are ideas for interesting or useful publications. We need someone to at least write a draft.

Introduction to new .deb and .rpm builds

Brief article overviewing the efforts by jordisayol for Debian, Ubuntu, Fedora, and openSUSE. Included are new icons, menu items, mime type associations, and more.

2010 End Of Year Review

Article giving an overview of the past year's highlight developments with hints at what 2011 may bring. Alternatively, may be the annual statistics review if we switch from fiscal to calendar year reporting.

Erik Greenwald: ADRT/ISST Visualization

Article introducing ADRT/ISST core capability.

Bob Parker: Alpha Archer: Working Towards Next Generation MGED

Article introducing Archer's core new features that will be "coming" to MGED. Undo, interactive editing, tree view, and info panels come to mind.

Finding the Hot Spots

Article on the rt lighting model Stephen Kennedy developed that visualizes the time spent per-pixel.

Point Clouds

Article introducing the new point cloud primitive.

bn_mat_inv: singular matrix

Article on the v4 format and binary compatibility.

Model Showcase: Goliath

Article talking about the making of the Goliath model.

Model Showcase: Chumaciera

Article on Pedro Baptista's bearing model.

Model Showcase: Proyecto Catapulta

Article on a model developed by André Santos, António Almeida, and Pedro Ferreira.

Model Showcase: Union Coupling Tool

Article on a model developed by Inês de Matos under teacher Luís Ferreira. The project focuses on a tool, union coupling, based on the book, http://purl.pt/14352 , page 122 of the original book and page 128 of the file, figures 108 and 109.

Geometry Service FAQ

FAQ summarization of the GS as it pertains to the wider open source community.

BRL-CAD's 3rd Generation Build System

Article on the new CMake build system.

BRL-CAD's Open Source Vision

Article introducing the Project Priorities diagram and overall project vision.

BRL-CAD Primitives Showcase

Article summarizing all of BRL-CAD's primitives and their current status.

BRL-CAD Geometry Converter Showcase

Article summarizing all of BRL-CAD's geometry converters.

Release Schedule

Explain our release schedule and versioning system.

RTGL

Article on Nick's point-based visualization mode.

BRL-CAD Quick Reference Card

Article on a BRL-CAD QRC similar to the existing MGED QRC.

BRL-CAD Bibliography

After the .bib gets published to the website, an article announcing it and soliciting additions.

Revolve Primitive

Article on Timothy Van Ruitenbeek's work implementing 'revolve'.

Parametrics and Constraints

Article on Dawn Thomas' work to integrate parametric equation and constraint evaluation support.

Converting Implicit to Explicit: CSG to BREP NURBS

Article on the work by Cliff Yapp, Joe Doliner, and Ben Poole converting primitives with an implicit representation into an explicit NURBS representation.

Online Model Repository

Article on Elena Băutu's work developing the model repository website.

Project Statistics for 2010

Article on our current stats similar to previous years.

Next Generation BRL-CAD

Article on our super secret awesome new GUI.

Retrieved from "https://brlcad.org/w/index.php?title=Community_Publication_Portal&oldid=2465"