MGED CMD track

track

Syntax

track [parameters]

Argument(s)

parameters

See specifics below.

Return Value(s)

No Return Values for this command.

Description

he "track" command builds a simple representation of the linked track of a vehicle such as a tank. With no command line arguments, the track command will prompt for all the required input. The vehicle is assumed to be axis-aligned with the front in the +x direction. A combination name for the track is built by appending a unique number to the string "track." The information about the track may be included on the command line, and is order-dependent. The parameters are (in order):

x coordinate of center of frontmost roadwheel.

x coordinate of center of rearmost roadwheel.

z coordinate of center of all roadwheels.

radius of all roadwheels.

x coordinate of center of drive wheel (rear).

z coordinate of center of drive wheel (rear).

radius of drive wheel.

x coordinate of center of idler wheel (front).

z coordinate of center of idler wheel (front).

radius of idler wheel.

y coordinate of right side of track.

y coordinate of left side of track.

track thickness.

Example(s)

mged> track 500 0 10 10 -50 50 10 550 50 10 -50 -20 2

Build a simple track using the provided arguments.

See Also

No related commands.

---

Page Generated by David Loman on: 10/12/2007 at: 7:26:19 AM