User:Phoenix/GSoc2013/Proposal

Project title

NURBS Intersection & Evaluation

Brief summary

Last summer I tried to do something on NURBS surface-surface intersection for BRL-CAD, but due to the limitation of time I cannot completely finish this project. I have implemented a routine to compute the intersection curves of two NURBS surfaces, and in general cases it works well, but to get a more robust one, I still need lots of work on it this summer. Lots of tests and verification are needed, and maybe a TDD (Test Driven Development) can be used in this step. To get the SSI working in all cases, no matter what the input is like is very important, otherwise it would be useless.

The remaining part of evaluating NURBS was done in a rush last summer, with lots of features still missing (definitely cannot work now). So in this summer, if there is enough time, I would like to continue to work on this project, finishing the remaining parts, and finally offer a routine to convert CSG combination objects to evaluated NURBS objects. The work includes partitioning a surface, and building the new NURBS geometry. If there's still some time remaining, I will tried to do more tests and verification to make the implementation better.

Detailed description

Introduction

NURBS surface-surface intersection is still a high-priority project in BRL-CAD. NURBS is a dominant geometric representation format in CADs, so we need to have enough support for it in BRL-CAD. Currently most objects in BRL-CAD are modeled in CSG, when converted to NURBS representations, the primitives are first converted to NURBS primitives, which BRL-CAD supports, but the next step is missing - evaluate the boolean operations on NURBS primitives, and then get an evaluated NURBS combination as the original CSG combination object. Currently BRL-CAD only gives ``CSG tree + unevaluated NURBS primitives", so we need NURBS intersections and evaluations. This has the potential to become the premiere free open source implementation of NURBS Boolean evaluation, but only if it's exceptionally robust to all inputs.

Below is my detailed proposal for this summer's project. In the first part, I'd like to mention the current status of this project left off last summer. Then I list my plan of this summer, dividing into several parts. At last, I'd like to show you the schedule and what I have already done this year about this project.

The current status of NURBS intersections & evaluations

Last year I spent about a month on NURBS intersections after I almost finished the Implicit to NURBS conversion project. I implemented a surface-surface intersection routine, using the sub-division method referred in a paper [1]. Now it can give us the intersection curves of two NURBS surfaces in both 3D spaces and 2D uv spaces. If the two inputs are in good condition, the result is quite reasonable (For detailed information, please see my last year's development log, there will be some convincing figures). But when the two surfaces have some coincides (some degenerated cases as described in [2]), the implementation still has problems, because it first calculates the intersection of surfaces' bounding boxes, and then use polylines to approximate the curves, however, in this case, we should get a surface, not some curves. And for some strange shaped surfaces, the accuracy of the output may be not ideal. (max_dis can be inputted manually to get a better result, but it's a burden for users)

And I also tried to calculate boolean operations on NURBS. I just focus on the union of two spheres, which is a well-conditioning problem, and tried to get a evaluated model which can pass the IsValid check offered by openNURBS, but failed. So this part only have many lines of code written, but cannot work yet.

Computing P/P, P/C, P/S, C/C, C/S intersections

Last year I implemented the SSI directly using the algorithm in [1], but the functionality to compute P/P, P/C, P/S, C/C, C/S intersections is missing (P: point, C: curve, S: surface). (See [3] for all the classifications of intersection problems)

This are basis of SSI, and can be used in dealing with some degenerated issues in SSI. So I'd like to implement this in the very beginning of my schedule. Like the surface-surface intersection, the subdivision algorithm can be a good candidate in these intersection problems, as BRL-CAD already has the functionality of generating curve trees and surface trees (see src/libbrep/opennurbs_ext.cpp). So for example, in the C/C cases, we can generate the curve trees of the two curves, calculating the intersections of the bounding boxes, and get the intersection point with triangular approximations. In C/S cases, the intersections should be between curve trees and surface trees.

The paper [3] is good reference on defining intersection problems, but its calculations are based on numerical analysis, which I think can be easily suffered from floating point precision and accuracy (for high dimension problems like C/C, C/S and S/S), so I would like to use the subdivision method instead, which already proves good functionality in the SSI implemented. In the other hand, the openNURBS library has strong evaluation support which can be very helpful in P/P, P/C and P/S.

Just like SSI, lots of tests and verification are needed in all these intersection problems. Some corner cases need to be considered as well. For example, two curves can touch at the endpoints, and a curve can have some part residing on the surface (that is, the intersection is a curve instead of a point, which is the general case). I should try to make the implementation as robust as possible, and it SHOULD work in all cases regardless of the input. Otherwise, the robustness of SSI can be affected, if it has some part based on lower dimensional intersection routines.

Calculating surface-surface intersection curves

The function calculating NURBS surface-surface intersection curves is in /src/libbrep/opennurbs_ext.cpp:

int surface_surface_intersection(const ON_Surface* surfA, const ON_Surface* surfB, ON_SimpleArray<ON_NurbsCurve*> &intersect3d, ON_SimpleArray<ON_NurbsCurve*> &intersect_uv2d, ON_SimpleArray<ON_NurbsCurve*> &intersect_st2d, double max_dis, double)

Some improvements are still needed:

1) If we detect there are many intersection points that seems to form a surface, not just curves, that it seems that these may exist an intersection 'surface'. But finding out this is quite confusing, because that may be some cases where two surfaces have many intersection curves that are very close to each other, but they don't have anywhere coincide. (The paper [2] considers such degenerate overlap issues in Part 4.3 Robustness issues)

2) There should be some detection related to the two surfaces when merging polylines (the 3rd step of SSI), not just using the max_dis parameter. In some cases, there may be two segments that should be in one intersection curve have bigger distance than two segments that exists in two nearby intersection curves, but we tend to merge the latter two segments instead of the former, without that detection.

3）Detecting loops. Note: only loops in the 2D uv space is of interest, those in 3D space is just for displaying, not very useful in the later evaluation process. A loop in the 3D space may not be a loop in the 2D space.

4) We should test more cases and find more problems in the intersection routine, and fix them to get better performance. A test driven development scheme can be adopted here.

5) Some code re-factoring is needed, and comments should be added to make the code more readable.

The goal of this part is to get a robust routine of SSI that can work in all cases, so the most important parts are test, validation and verification. Until after the routine is proved to pass strict tests can we move to the next step.

For more detailed in tests and verification, see the part below: More on tests and verification.

P.S. The next two parts focus on the rest steps in evaluating NURBS, which should be done after the SSI is satisfying. This will not happen too early in my schedule, but I think they should appear in my proposal as I already have some clear ideas on this, and ready to do this in my project.

Split the surfaces and generate new trimmed sub-surfaces using intersection curves

The code in the function split_trimmed_face in src/librt/primitives/brep/brep.cpp currently works on this, but it's just a scratched draft worked out last summer. (I think there should be an independent file containing the NURBS evaluating code)

The paper [2] gives us a good direction on how to do this. We get intersection curves in 2D uv spaces in the first part, and a NURBS surface in a 2D uv space is much simpler than in the 3D space. Trimming curves are also 2D curves. As the paper suggests, we can use the non-intersecting chains to partitioning a simple polygon (just like what we need to do in the 2D space: the intersection curves are polylines, and the outer loop of a surface will always be a polygon). There has been some drafted code already in BRL-CAD, but they don't work well. Further study of this algorithm and better implementation are needed this summer.

Note that inner loops should be considered, as is not mentioned in the paper.

And curve-curve intersection is needed in this part when we need the intersection of intersection curves and trimming curves, but it's not difficult because they are all polylines. Actually, the paper suggests a fast routine using Seidel's algorithm for fast polygon triangulation to calculate this, as intersection curves are always close curves in spaces.

And I have a small question here: as far as I'm concerned, in this step, we just use trimming curves to define the border of a new partitioned face (the trimming curves will play a role in the final ON_Brep object), but the ON_Surface as well as ON_BrepFace is still the original one, is that enough to describe the result of splitting?

Computation of the new solid model

Currently nothing have been done on this. It's the last step - performing inside/outside tests to determine whether a trimmed surface should appear in the final evaluated model or not. But inside/outside tests are time-consuming (described later), and the paper [2] suggests using connectivity graphs, which can reduce the number of inside/outside tests to only two per operation.

A connectivity graph is an undirected graph describing the neighborhood information between the patches constituting the solid, representing the topology of the solid model. Each patch of a solid is associated with a vertex, and an edge exists in the graph iff the relative patches are neighboring patches. And when we compute the new model, we construct a new connectivity graph whose vertices are connected components of the old graph and there is an edge between two components if they lie on either side of the intersection curve. From the construction it is clear that if one vertex lies inside the other solid all its neighbors lie outside and vice versa. Therefore performing exactly one inside/outside test is sufficient to determine the containment classification of each component.

As for how to perform inside/outside tests - we use curve-surface intersection - computing the number of intersections of a semi-infinite ray emanating from a point with the solid, and if the number is odd, the point is inside the solid, otherwise it's outside.

Operations include: union, difference, intersection.

Finally we generate the ON_Brep object. Lots of elements should be added - edges, curves, trims, etc. and the ON_Brep::IsValid() will check. Read the code in IsValid() functions will help us know what a valid ON_Brep shbuld look like. The code in add_elements() in /src/librt/primitives/brep/brep.cpp has some basic routine but is far from complete.

As Cliff suggests, the code in src/librt/test_bot2nurbs.cpp may help illustrate how the structures can be built up. The brep structural assembly itself (curves/edges/surfaces/faces/etc.) may be helpful.

Tests

First, some basic tests - e.g. two spheres have some part intersecting, an arb8 and a sph, etc.

If the evaluation on basic primitives is satisfiable, more complicate tests should be performed. Finally, we should test on the /share/db/*.g files, and tried to convert the big models (m35, havoc) into evaluated NURBS models.

Besides, the brep command in MGED should be extended, to support evaluations of NURBS objects (Don't forget the manual page). Maybe this command can also be migrated into archer. The conversion script (conversion.sh) should also be modified to generate evaluated NURBS.

Links

[1] Adarsh Krishnamurthy, Rahul Khardekar, Sara McMains, Kirk Haller, and Gershon Elber. 2008. Performing efficient NURBS modeling operations on the GPU. In Proceedings of the 2008 ACM symposium on Solid and physical modeling (SPM '08). ACM, New York, NY, USA, 257-268. DOI=10.1145/1364901.1364937 http://doi.acm.org/10.1145/1364901.1364937

[2] S. Krishnan, A. Narkhede, and D. Manocha. BOOLE: A System to Compute Boolean Combinations of Sculptured Solids. Technical Report TR95-008. Department of Computer Science, University of North Carolina, 1995. http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.38.88

Deliverables

• NURBS surface-surface intersection routines
• Other intersection supports: P/P, P/C, P/S, C/C, and C/S
• NURBS evaluation support
• CSG model to evaluated NURBS conversion

Development schedule

As far as I'm concerned, I would like to focus on the second and third steps in the first part, as they are far from complete at present. I'm going to have a routine that 'can' work first, and then modify it to work 'well'.

• - June 17 (~4 weeks)
  • Study the papers on this topic
  • Discuss with other developer on implementations
  • Read the code in librt/libbrep/openNURBS
  • Fix the bugs in the intersection curve computation
  • Some code clean up in the current SSI routine
• June 17 - June 30 (2 weeks)
  • Finish the surface partitioning
    • Polygon partitioning
    • Curve-curve intersection
  • Tests
• July 1 - July 7 (1 week)
  • Add connectivity graph support
    • Generate connectivity graphs for objects
    • Design proper data structures for the graph
• July 8 - July 14 (1 week)
  • Inside-outside tests
    • Curve-surface intersection
    • BFS of the graph to determine inside/outside
• July 15 - July 28 (2 weeks)
  • Generate valid ON_Brep objects
    • Read code in IsValid() functions
    • Add elements (trim, edge, etc.)
    • Try to pass the validation
• July 29 - Aug. 4 (1 week)
  • Mid-term evaluation
  • Some basic tests
    • Fix bugs
    • We have a routine that 'can' work
  • Extend the brep command in MGED
• Aug. 5 - Aug. 18 (2 weeks)
  • Robustness Issues
    • Deal with the degenerated cases
    • All 3 steps should be modified
• Aug. 19 - Sept. 1 (2 weeks)
  • More complicated tests
    • Fix bugs
    • Improve performance
• Sept. 2 - Sept. 8 (1 week)
  • Evaluate a whole NURBS model
  • Convert large CSG models to evaluated NURBS
    • havoc, m35
• Sept. 9 - Sept. 15 (1 week)
  • The conversion.sh script
    • Support evaluate NURBS conversion
  • Migrate the brep command to archer (optional)
• Sept. 16 - Sept. 22 (1 week)
  • Pencils down
    • Code clean up
    • Documentation (wiki pages)
• Sept. 23 - Sept. 27 (1 week)
  • Final evaluation
  • Submit code to Google

Time availability

I can offer 40+ hours per week on the project. The semester ends at the late June, and the next semester begins at the beginning of September.

Why BRL-CAD

I have spent one summer with BRL-CAD last year, and got familiar with it, and I also love this open source CAD system. I can learn a lot and enjoy my programming with BRL-CAD.

Why me

I finished my project successfully with BRL-CAD in last year's GSoC. And this year's topic is also related to NURBS, and I'm quite familiar with it. This project had a good beginning by me last summer.