User:Hcurtis0010/GSoC2014/logs

Week 1

Monday, May 19

I re-read the Hacking file, and that led me to do research on binaries, regression testing, and other topics. Also, I had a good IRC conversation with my mentor, Sean Morrison, about how best to interact with one another and what I will need to do to succeed during GSoC.

Tuesday, May 20

Sean and I had an enlightening IRC conversation in which he pointed out the danger of relying too much on examples when dealing with code.

Afterward, I wrote some programs involving arrays. Although I finished the first one, I ran into problems with the second. I did some research as I attempted to solve it; the topics I investigated included dynamic allocation, vectors, and heaps. Sean had asked me to create the programs in order to learn more about dynamic and stack memory and be able to apply that knowledge to future GSoC activities.

Wednesday, May 21

I am happy to say that I learned a lot today. One of the more memorable things I learned was that I should not put the "using namespace" construct in my programs. I conducted research to find out why. Also, I read about malloc(), pointers, sizeof, and the differences between ANSI C, C99, and C++.

I showed to the community the program that I completed yesterday, and I received feedback on it. That evening, I worked on the second program, the one that had been giving me problems. In it I used malloc() for the first time. At first it wouldn't compile, and later it would compile but would crash at runtime. However, I finally got it to work after a fellow GsoCer, raj12lnm, told me what I was doing wrong.

The work I did today is preparing me to address problems with BRL-CAD’s fast4-g.c program as well as produce the conversion library that will be the focus of my GSoC proposal. We'll see how it goes.

Thursday, May 22

I converted yesterday's C++ programs to C. At first, they refused to compile, but after some research and a little trial and error, I was able to get them to work. A fellow GSoC student, oana_, helped me remedy a problem with one of them. The process was a good lesson. One interesting thing I learned was that I should avoid using certain code elements such as conio.h, getch(), and scanf_s because they work solely in Microsoft compilers and thus would make my programs less portable.

Next, I will create a version of my dynamic allocation program that uses functions from BRL-CAD’s libbu library API instead of those of the standard library. As I do so, I am sure that I will use plenty of what this week’s C++ and C exercises have taught me.

Friday, May 23

Today, I worked on a version of my dynamic allocation program that features libbu elements in place of stdlib functions. This is one more activity will help prepare me to tackle the fast4-g task. Unfortunately, I ran into a problem: I could not get the compiler to locate all of the interdependent header files that the program needs in order to run.

Saturday, May 24

I re-read the GSoC checklist to identify the items on it that I have not yet done. Also, I re-read and analyzed BRL-CAD’s fast4-g.c program and worked on my plan to improve it.

Sunday, May 25

Today, I continued to analyze the fast4-g.c program and work on my plan to improve it. As a part of this, I researched elements in it that I was not familiar with. This process is teaching me skills that will help me complete my GSoC project.

Also, I read the online document "How To Ask Questions The Smart Way." It taught me how to ask well-researched questions when requesting other developers' help with problems.

Week 2

Monday, May 26

I read more about pointers, malloc, and other topics in order to understand them better. Also, I continued to analyze fast4-g.c so that I could put myself in a better position to improve it.

Tuesday, May 27

Unfortunately, I became stuck while working on fast4-g.c In order to get out of that rut, I asked myself new questions about the task as part of a fresh approach to it. Then, I continued to analyze the program as well as the problem I was attempting to solve.

Wednesday, May 28

Today, I continued to work on the fast4-g.c issue. I found evidence that I might be going down an incorrect path in my approach to the problem. With some additional work, I will know for sure whether this is true.

Thursday, May 29

I had a good IRC conversation with GSoC mentors Sean Morrison and Erik Greenwald this evening about my progress. Because of a prior commitment, I was not able to work on GSoC tasks as much as I would have liked. However, I will make up for that tomorrow.

Friday, May 30

Today, I read information about and practiced using my virtual machine and my developer tools. I have realized that I need to increase my proficiency with them in order to continue making progress.

Saturday, May 31

I continued to research and work with my developer tools and virtual machine. I ran into problems when I tried to install a software update for the VM, but I managed to solve them.

Sunday, June 1

What I did today was read the install file and the Contributors' Guide to BRL-CAD. It served as preparation for another try at making my dynamic allocation program work using BRL-CAD functions.

Week 3

Monday, June 2

I worked on the libbu task (the one that involves using BRL-CAD functions like bu_malloc to run my dynamic allocation program). Also, I conducted research as needed; part of that was a good IRC conversation with Sean during which I learned the correct way to use some important virtual machine commands.

Tuesday, June 3

Today I continued to make progress on the libbu task. As a part of this, I read about CMake and how it locates libraries.

Wednesday, June 4

I read about CMake and how to write a CMakeLists.txt file. Afterward, I attempted to write one.

Thursday, June 5

During the first half of today's work session, I read more about CMake and worked on my CMakeLists.txt file. However, when I communicated with Sean later that day, he told me that for now I should use GNU Compiler Collection (GCC) commands instead of a CMakeLists.txt file to compile my program. He said that it is important that I build manually at first so that I can learn what the GCC options mean and how compilation and linking work.

Incidentally, a problem I have is how long my system takes to build BRL-CAD. I hope that I can find a way to shorten the time.

Friday, June 6

I continued trying to enable my dynamic allocation program to use BRL-CAD headers. As a part of this, I read about GCC and its commands.

Saturday, June 7

Today I was able to compile my dynamic allocation program. However, that gave rise to new issues that had to do with linking. I researched some possible solutions and tried them, but I did not have much success. I will keep trying.

Sunday, June 8

I had a good IRC conversation with Sean about the dynamic allocation task. Afterward, I was able to both build and link my program, but it would not run. The error message it gave said that it could not locate the shared object file. I began investigating the problem, and I learned a lot.

Week 4

Monday, June 9

During our conversation in the #brlcad IRC channel, Sean gave me helpful feedback on the GCC options I was using to compile my dynamic allocation program. However, even after I incorporated his suggestions, I received an error message when I attempted to run the code. I will continue to search for a solution.

Tuesday, June 10

I kept researching and trying different ways to enable my dynamic allocation program to use BRL-CAD functions, but unfortunately, none of them worked. At least my efforts did allow me to rule out an incorrect file path in my compile line as the cause of the error message. Incidentally, my laptop overheated and began running slowly, so I had to turn it off and let it cool before starting it again and rebuilding BRL-CAD.

At the very end of the night, I finally solved the problem with my dynamic allocation code. I was very happy.

The technique that worked involved my adding the path of the library I needed to my system’s /etc/ld.so.conf file. In the process, I used the editors vi and nano for the first time.

Wednesday, June 11

I resumed work on the fast4-g task that I had first attempted several days ago. I researched and analyzed the problem, and then I began designing the changes I planned to make to the code.

Thursday, June 12

I continued making corrections to fast4-g. However, I was not able to dedicate a lot of time to GSoC today because of a prior commitment.

Friday, June 13

I worked some more on the fast4-g task. I ran into some problems in dealing with parts of the program that I do not understand well. I might need to consult with a mentor before I can continue.

Saturday, June 14

Today I closely reexamined and conducted further research on the parts of fast4-g that I do not understand well. I was able to answer some of the questions I had about this task, but I am still stuck. Tomorrow I will discuss the situation with my mentors and show them the code I have written.

Sunday, June 15

I conversed over IRC with a fellow GSoC student, andrei__, about my fast4-g task. His comments were helpful. Also, I continued working on my corrections to the code.

Week 5

Monday, June 16

In an attempt to become "unstuck" and resume making satisfactory progress, I experimented with different features within the fast4-g code I had written. I found the process beneficial.

At the end of the night, I had a good conversation with Sean. He provided feedback on the work I had done on the libbu dynamic allocation task. Also, he gave me excellent advice on how best to ask for assistance in the #brlcad channel.

Tuesday, June 17

Today Sean gave me very helpful feedback on the code I had written for the fast4-g task. I worked on rewriting the code.

Wednesday, June 18

In order to deepen my understanding of the fast4-g task, I reread my notes and identified the most important and helpful pieces of information.

Afterward, I finished and posted a new draft of my code converting the program's region list from stack allocated to dynamic. I thought it was a step in the right direction, and hopefully, I will soon be able to submit a patch.

One unfortunate fact that is impeding my progress on this task is that I do not have a fully clear picture of how fast4-g converts geometry from the fastgen4 format to the BRL-CAD format. I have tried hard to examine the program and research the parts of it that I do not understand. Even so, I am having a hard time knowing what corrections to make in order to solve the problem at hand.

My lingering questions are as follows:

• How do I know when the heap memory allocated for the group_head needs to be resized?
• Once I have determined that, how do I know what new size it needs to be?
• Why does the group_head array in fast4-g's commit 56495 hold 11 elements in particular and not some other number of them?

Thursday, June 19

Today I continued working on my fast4g task. This included further attempts to answer the questions I listed in yesterday's log entry.

Understanding the way pointers work is an important part of this endeavor. I thought my familiarity with them was adequate, but I later realized that I was mistaken. For example, I did not understand the concept of pointer dereferencing as well as I should. Before continuing to code, I read some information about pointers that was appropriate for my skill level in order to improve my understanding of them.

Also, I began going back through fast4-g.c to look for clues to the answers to my questions, but then I thought of a better idea. Since I knew that the wmember variable called group_head was an important part of the solution, I decided that I needed to focus on learning more about that element in particular. In order to accomplish this, I examined the functions and macros that are associated with it. It was a process that I found worthwhile.

Incidentally, an additional question I now have is about the meaning of the Ws in the variable name wmember and the header name wdb.h. I looked for the answer but could not find it.

Near the end of the night, I read a BRL-CAD tutorial pdf called "Converting Geometry Between BRL-CAD and Other Formats." It included a section about FASTGEN-to-BRL-CAD conversion that helped me to better understand the fast4-g task.

Friday, June 20

I worked again on the fast4-g task. One interesting thing is that last night's research improved my understanding of the differences between CSG and BREP. While FASTGEN4 is a BREP format, BRL-CAD is oriented more toward CSG. Fast4-g.c's purpose is to convert FASTGEN4 to BRL-CAD.

Andrei_, a fellow GSoC student who has helped me before, offered me an answer to one of the questions I had posted. Also, he gave me feedback on the code I had written. It was kind of him.

Incidentally, I posted a new draft of my corrections. It is here: http://paste.lisp.org/+32AW

I read some great information about structs and pointers. It will help me to understand the parts of fast4-g.c that I am having trouble with and to write high-quality code for my patch.

I have a new question: when I allocate memory for the group_head wmember list in fast4-g.c, should I use bu_*alloc() or bu_get()? I researched this, but I could not find a clear answer.

I do know that bu_*alloc() is right for items that are large or infrequently needed. In contrast, bu_get() is suitable for small pointers and is faster. Sean said that he would like fast4-g.c to be faster, but maybe group_head is too large for bu_get() to handle.

Saturday, June 21

Today was another day devoted to fast4-g. I went back through the program and traced the flow of all of the modules that involve the variable group_head. My understanding of the code has never been better; now I need to figure out exactly what form these stack-allocated instances of group_head will take upon becoming dynamically allocated.

A question that I asked earlier this month in the #brlcad IRC channel is this: with what number do I replace 11, the subscript of the stack-allocated version of group_head, once I make group_head dynamically allocated? I think that I now have the answer.

Also, interestingly enough, I am realizing that understanding fast4-g.c involves learning about the way linked lists function. There is a macro called BU_LIST_INSERT in the program that works with group_head. The comments accompanying the macro definition say, "To put [a] new item at the tail of [a] list, insert [the new item] before the head."

This does not make sense to me. I thought that placing something at the end of a list meant placing it after the list's head. I attempted to find information that would clarify this, but I could not. I asked a question about this in the channel to see whether anyone would be willing to explain it.