Difference between revisions of "MGED CMD nmg collapse"
From BRL-CAD
m |
|||
| Line 1: | Line 1: | ||
| − | [[Category:MGED| | + | [[Category:MGED|Nmg collapse]] |
=nmg_collapse= | =nmg_collapse= | ||
Revision as of 12:16, 15 November 2009
nmg_collapse
Contents
Syntax
- nmg_collapse old_nmg_shape new_nmg_shape maximum_error_dist [minimum_angle]
Argument(s)
- old_nmg_shape
- Valid BRL-CAD NMG Primitive
- new_nmg_shape
- Name for new NMG Primitive
- maximum_error_dist
- Max Error value used for edge deletion.
- [minimum_angle]
- Minimum edge angle value used for edge deletion.
Return Value(s)
- No Return Values for this command.
Description
The "nmg_collapse" command simplifies an existing nmg_shape by a process of edge decimation. Each edge in the old_nmg_shape is considered; if it can be deleted without creating an error greater than the specified maximum_error_dist, then that edge is deleted. If a minimum_angle is specified (degrees), then the edge will not be deleted if it would create a triangle with an angle less than minimum_angle. The resulting shape is saved in new_nmg_shape. The old_nmg_shape must have been triangulated previous to using the nmg_collpase command. The resulting shape consists of all triangular faces.
Example(s)
- mged> nmg_collapse nmg_old nmg_new 1.0 10.0
- Decimate edges in nmg_old to produce an NMG with an error no greater than 1.0 units. The process will not create any triangles with an angle less than 10˚. The new NMG shape will be named nmg_new.
See Also
Page Generated by David Loman on: 10/11/2007 at: 1:54:28 PM
