Editing User:Izak/GSOC 2013 logs

==PROJECT DETAILS==
Project Title : Implementation of a heart primitive.

Name: Isaac Kamga.

IRC Name (Handle): Izak

e-mail: u2isaac@gmail.com

Phone : +237 74 10 62 97

==Introduction==
This page will contain logs of the work I will be doing during and after the summer of code period.

==From June 3rd to June 7th==

*Compiled and ran  BRL-CAD from source (in 26 minutes) as well as used mged command interface.

* Studying /src/librt/primitives/*/*.

* Revising red-black trees in "Introduction to algorithms",third edition book by Cormen.

==From June 10th to June 14th==
*Fixing rb_delete.c to effectively delete nodes.

==My Development Pictures==



==From June 17th to June 21==

June 17

*Finished working on rb_delete.c .

June 18

*Edited raytrace.h by defining ID_HRT 43 ,incrementing ID_MAXIMUM and ID_MAX_SOLID to 44 as shown in this patch .

*Added the DB5_MINORTYPE_BRLCAD_HRT 42 define to db5.h as shown here .

June 19

*Hoped to do this today : Need to look at the "Metaball" paper on using the blobby method , read volume rendering by Drebin et al and edit magic.h and rtgeom.h to include the heart primitive .

*However, took ill ( of malaria ) so undergoing treatment .

June 20

*Ill of malaria so undergoing treatment .

June 21

*Ill of malaria so undergoing treatment .
*Uploaded some patches [http://sourceforge.net/p/brlcad/patches/191/ here].

June 22

* Recovering from brief illness.... 

* Updated GSoC 2013 Accepted projects page on the wiki .

==From June 24th to June 29th==

June 24

* Re-read the Patch submission guidelines in the HACKING file .

* Read the research paper titled "Volumetric shape description using the blobby model" which was used to implement the metaball primitive ( by the second method). Since the above method is used with two sphere primitives to create a metaball , I am considering using this same method alongside two spheres ( for the heart lobes ) and an elliptical parabola - epa  (for the lower portion of the heart ). Need to verify the correctness of this design approach on the mailing list.

June 25

* Studying the ray tracing geometry header ( rtgeom.h ) to write the heart primitive's internal representation (struct rt_hrt_internal) .

* Searching for more information on the key properties of the heart .

* Editing the magic numbers header ( magic.h ) which I have patched [https://sourceforge.net/p/brlcad/patches/203/ here] .

* Currently writing the struct rt_hrt_internal structure which I have kept [https://sourceforge.net/p/brlcad/patches/204/ here] .Also wrote the RT_HRT_CK_MAGIC(_p) macro in rtgeom.h for the heart .

June 26

* Finished Modifying the magic header file [https://sourceforge.net/p/brlcad/patches/203/ here] which I earlier on submitted .

* Looking into the internal representations of the tor and the superell .

* Reading the rt_???_shot() functions in src/librt/primitives/tor/tor.c and src/librt/primitives/superell/superell.c to understand how they build up and evaluate formulae.

* Included the internal representation of the heart in the include/rtgeom.h file used by the ray trace geometry library .That is, added the ID_HRT section ( struct rt_hrt_internal ). Please, take a [https://sourceforge.net/p/brlcad/patches/204/ look] :)

* Editing the table.c file in src/librt/primitives .Declared a raytrace interface for the heart by RT_DECLARE_INTERFACE(hrt) . Edited the rt_functab[] array by providing an entry ID_HRT for the heart primitive. That is, add RT_FUNCTAB_MAGIC, "ID_HRT", "hrt",rt_hrt_*, just to name a few. You are welcome to look at my [https://sourceforge.net/p/brlcad/patches/205/ progress].

June 27

* Early in the morning I Left Buea, my home town to collect Google's welcome package in Douala. Collected some cash from the available ATM . Negotiating for Internet access and cool coding environment.Really tired.

June 28

* Corrected and submitted the db5 header [https://sourceforge.net/p/brlcad/patches/191/ ( See db5.patch )] based on guidelines given by mentors.

* Corrected and submitted the raytrace header [https://sourceforge.net/p/brlcad/patches/191/ ( See raytrace.patch )] based on guidelines given by mentors.

* Corrected and submitted the magic header [https://sourceforge.net/p/brlcad/patches/203/ ( See newest_magic.patch )] based on guidelines given by mentors. Still to correct the magic.c file to make these changes complete.

June 29

* Editing the magic.c file to accommodate the heart primitive. Uploaded the [https://sourceforge.net/p/brlcad/patches/203/?page=1 patch here].

* Reworking the ray trace geometry header file (rtgeom.h) so that the internal representation of the heart will be accurate.

==From July 1st to July 6th==

July 1

* Working on struct rt_hrt_internal inorder to include the heart primitive into the include/rtgeom.h header. Reading wikipedia and Wolfram pages on heart symbol,Level set,cusps and epicycloids.

* Combined magic_h.patch and magic_c.patch into single [https://sourceforge.net/p/brlcad/patches/203/?page=1  magic.tar.gz] compressed file .

* Combined db5_h.patch and db5_types_c.patch into single [https://sourceforge.net/p/brlcad/patches/207/  db5.tar.gz] compressed file.

July 2

* Still awaiting clarifications which I requested on the mailing list to develope the internal representation of the heart primitive in include/rtgeom.h.

* Corrected the [https://sourceforge.net/p/brlcad/patches/203/?page=1 hrt_magic.patch] file based on recommendations given by my mentor.

* Corrected the [https://sourceforge.net/p/brlcad/patches/207/ hrt_db5.patch] file based on recommendations given by my mentor.

* Awaiting some answers to questions posted on the mailing list in order to proceed with the editing of rtgeom.h and raytrace.h

July 3

* Getting requisite authorization to connect Workspace at the Faculty of Science building to the Internet. Not easy dealing with a bureaucratic system in which every administrative decision has to be documented in letters.

* Downloaded subversion packages and source code to install. Need this to submit patches that apply cleanly.

* The above activities took the whole day. Could not do coding work.

July 4

* Doing negotiations to get Internet access. This is a prerequisite to submitting perfect patches which are generated from the svn checkout.

* Pushing through with authorization for Internet access at my workspace .

* Presented the "Implementation of the heart primitive" proposal and progress reports to lectures and students of the Departments of Computer Science and computer Engineering.

* Did no coding work today as I was preparing a good environment for coding.

June 5

* Did detailed mind maps to aid visualization of necessary editing of files to aid submission of logical patches. This will help see exactly how to group file changes like magic numbers , mirror support, mged support, etc.

* Got equipment ready for installations of Internet but could not install today due to rainy weather. Hoping to get a sunny window tomorrow morning for installation.

July 6

* Awaiting the arrival of Head of Department from Bamenda. Discussed with him the need for authorization to install Internet at the laboratory by phone. He said we need to officially discuss it during office hours on Monday,July 8.

* Doing research on how to solve the sextic equation of the heart. Read some papers and observed that the sextic equation of the heart does not meet the conditions presented in the literature.

==From July 8th to July 14th==

July 8

* Yoopee:) My Head of Department discusses the need for GSoC students to temporarily install Internet at the laboratory with the Dean of the Faculty of Science.The Dean seconds the idea and writes to the Vice-Chancellor for final authorization. Waiting for the final authorization from the Vice-Chancellor within the week.This is the [https://docs.google.com/file/d/0B4kEIUMOBbU-SlBaeEdqQ0Eta1U/edit?usp=sharing letter] I wrote to the Deputy Vice Chancellor .The Head of Department's letter through the Dean to the Vice-Chancellor can be viewed [https://docs.google.com/file/d/0B4kEIUMOBbU-b2xzMXl2Y2lyaG8/edit?usp=sharing here].

* Modified the internal representation of the heart (struct rt_hrt_internal).

* Including an entry into the rt_functab[] array for the heart.

* Plan to generate the patches from the work done immediately Internet access is available.

July 9

* Correcting my M.Sc. thesis in order to submit to supervisor until 13:00 UTC. 

* Finished working on the internal parameters of the heart solid in include/rtgeom.h .It now includes a center point, unit vectors in x,y and z directions and distance from center point to both upper and lower cusps.

* Added mk_hrt() routine and associated comments to the include/wdb.h header file and src/libwdb/wdb.c file.

* Added p_hrt[] array and hrt_in() routine to src/libged/typein.c so as to read heart parameters from the keyboard. 

* Waiting for final authorization for temporal installation of Internet access to generate patches which I worked on using svn.My Head of Department says the Dean still awaits response from the Vice-Chancellor's office.

* Intend to test these edits tomorrow. Couldn't do these today because the Faculty building was very noisy today due to a staff meeting.

July 10

* Had a two-hour entretien today with my supervisor and head of Department until 10:00 UTC.

* Created a hrt_magic patch file ( generated from diff -u for now ),the patch applied cleanly and BRL-CAD source compiled.

* Created a hrt_stub patch file ( also generated from diff -u for now ), patch applied cleanly and BRL-CAD source compiled.Realised that an empty heart primitive has NULL fields in its rt_functab[] array entry. 

* Still Awaiting response to letter of authorization from the Vice-Chancellor :(

* For tomorrow's work, I intend to create a heart object which can be tested in the mged interface.

July 11

* Debugged and compiled the int mk_hrt(struct rt_wdb *wdbp, const char *name, const fastf_t *center, const fastf_t *xdir, const fastf_t *ydir, const fastf_t *zdir, const fastf_t d) routine which was previously added to src/libwdb/wdb.c file.

* Debugged and compliled the p_hrt[] array and the hrt_in(struct ged *gedp, char *cmd_argv[], struct rt_db_internal *intern) function which was previously added to src/libged/typein.c . 

* Tested the compiled code by reading in the coordinates of a heart object using the keyboard on the mged interface as shown [https://docs.google.com/file/d/0B4kEIUMOBbU-ZUpmcXpxZlFzVXc/edit?usp=sharing here ]. Feeling great!:)

* Still awaiting response from the Vice-Chancellor.

* Intend to finish any hacks of the mged interface and get into the difficult functions like rt_hrt_shot, rt_hrt_prep , etc.

July 12

* Added case HRT to the solbld function in src/conv/asc/asc2g.c which parses the heart record and determines which libwdb routine to call in order to replicate it. Debugging asc2g.c.....

July 13

* Started writing rt_hrt_shot() function for src/librt/primitives/hrt/hrt.c

==Monthly Summary==

Work done 

1. Added magic numbers: 
*Defined RT_HRT_INTERNAL_MAGIC Ox6872743f in include/magic.h 
*Included a case RT_HRT_INTERNAL_MAGIC in src/libbu/magic.c
*I ended up with hrt_magic.patch.

2. Stubbed in an empty heart primitive
*Defined DB5_MINORTYPE_BRLCAD_HRT in include/db5.h.
*Incremented ID_MAX_SOLID and ID_MAXIMUM to 44 as well as defined ID_HRT as 43.
*Added { DB5_MAJORTYPE_BRLCAD, DB5_MINORTYPE_BRLCAD_HRT, 1, "hrt", "Heart" } as entry for the heart primitive in src/librt/db5_types.c.
*Added struct rt_hrt_internal{} to internally represent the heart and wrote the RT_HRT_CK_MAGIC(_p) macro .
*Declared RT_DECLARE_INTERFACE(hrt) and edited rtfunctab[] to include an entry for the heart in src/librt/primitives/table.c .This entry had many NULL fields.
*With this, I generated hrt_stub.patch.

3. Added type in support for the heart (so as to read heart parameters from the keyboard.)
*Added mk_hrt() routine and associated comments to include/wdb.h and src/libwdb/wdb.c .
*Added p_hrt[] array and hrt_in() routine to src/libged/typein.c 
*This gave birth to hrt_type.patch, which was compiled, debugged and tested in the mged interface (See July 11 on my Development log).

Future work

* Start coding and testing the Intersection of a heart with a ray by writing int rt_hrt_shot(), void rt_hrt_norm, void rt_hrt_uv, etc

==From July 15th to July 20th ==

July 15

* Studying how the quartic equation of the torus is built until the roots of this quartic equation is found by the root finder.
 
* Working on int rt_hrt_shot() function whereby a ray intersects with the heart.This yield a sextic polynomial in t with 7 coefficients each with an average of 70 algebraic terms. The coefficient of t^6 has been computed while the coefficient of t^5 is being computed.

July 16
* Working on the t^5 and t^4 coefficients of the sextic equation in the int rt_hrt_shot() function whereby a ray intersects with the heart.

July 17

* Finished working on the coefficients of the sextic equation... Pretty tedious.

* Discussed today with my former mathematics professor who pointed me to the  Rouche's theorem to locate complex roots of a polynomial . Researching on this Theorem to locate roots and solve sextic equation.

July 18

* Following up the letter written to the Vice-Chancellor at the Central Administration. No coding work done today.

July 19

* Finished writing the rt_hrt_shot() function which has to be debugged and tested.

July 20

* Had a headache today. Did no coding work. Just did some planning and light observation of toroid and superell primitives in src/librt/primitives/.

=From July 22th to July 27th=

July 22

* Wrote the rt_hrt_parse[] array based on the internal properties of the heart.

* Corrected the hrt_specific structure.

* Wrote the rt_hrt_prep() function to prepare the heart object for ray shoting.

* Making sure that my patches compile, although not yet generated from svn diff -u .

July 23

* Fixed my S.L. 6.2 system today after a crash. Lost the 0rt_hrt_prep() function which I already wrote  :(. Not a big deal though. 

* Helped install Internet at the laboratory.

* Discussed on IRC with brlcad on setting up a bzflag account. Accepted the usage policy and rules. Got this account set up. 

* Discussed with brlcad and Erik on IRC about correcting my communication (posting) style. Read the more academic [http://en.wikipedia.org/wiki/Posting_style wikipedia] page and Erik's recommended  [http://catb.org/jargon/html/T/top-post.html link] in order to correct this.

* Checking my patches from A to Z.

July 24

* Generated and tested the [https://sourceforge.net/p/brlcad/patches/203/?page=1 hrt_magic.patch] that it applies cleanly, independently and without any side effects.

* Generated and tested the [https://sourceforge.net/p/brlcad/patches/207/ hrt_stub.patch] that it applies cleanly, independently and without any side effects.

July 25

* My mentor [http://sourceforge.net/p/brlcad/patches/203/?limit=10&page=1#836c accepted] the hrt_magic.patch and [http://sourceforge.net/p/brlcad/patches/203/?limit=10&page=1#a682 applied] it to r56212. :)

* Doing changes to generate hrt_typein.patch.

July 26

* Removing errors from the hrt_typein.patch 

* My hrt_stub.patch file got [http://sourceforge.net/p/brlcad/patches/207/?limit=10&page=1#99a9 closed-accepted] status and [http://sourceforge.net/p/brlcad/patches/207/?limit=10&page=1#f22c applied] to r56235.

July 27

* Working on a test for the [http://sourceforge.net/p/brlcad/patches/191/ rb_delete.c] function.

=Pre-midterm evaluation summary=

In order to prepare the  BRL-CAD source code for the heart primitive , I hooked the heart primitive into the BRL-CAD source by adding a magic number for the heart in include/magic.h and src/libbu/magic.c, stubbing an empty heart in include/db5.h, include/rtgeom.h, include/raytrace.h, src/librt/db5_types.c and  /src/librt/primitives/table.c and adding typing support for the heart in the mged interface in include/wdb.h, src/libwdb/wdb.c and src/libged/typein.c as can be seen [https://docs.google.com/file/d/0B4kEIUMOBbU-ZUpmcXpxZlFzVXc/edit?usp=sharing here]. As regards the ray tracing callback functions in src/librt/primitives/hrt/hrt.c , I have built the hrt_specific structure, written the rt_hrt_shot() and rt_hrt_prep() functions and I am currently testing these.I intend to continue working on other callback functions like rt_hrt_import(), rt_hrt_print(), etc and finally hook the heart primitive to the mged and archer interfaces with associated clean up and documentation.

=Mid-term Evaluation week=

July 29

* Fixed a typo ( V_vec instead of v_vec on line 286 of src/libger/polyclip.cpp )  and generated a [http://sourceforge.net/p/brlcad/patches/218/ patch] which was applied to r56306 by Mohit Daga.

* Working on the starting requirements of Google Developer Group (GDG Buea) : Created GDG Buea Google+ page with links to agents' pages , GDG Buea google group,etc

July 30

* Filled Mid-term evaluation form and submitted to google-melange.com

* Compiled and tested the int mk_hrt() routine and p_hrt[] array & the hrt_in( ) function in src/libwdb/wdb.c file and src/libged/typein.c respectively. Generated and uploaded this hrt_typein.[https://sourceforge.net/p/brlcad/patches/220/ patch].

* Had an IRC session where I discussed with mentors on the importance of paying attention to detail.

July 31

* Worked on opening comment, bu_structparse rt_hrt_parse array and hrt_specific structure .

* Posed a question to other developers asking for help on writing rt_hrt_bbox() routine and testing callback functions in hrt.c

August 1

* Presenting the work done to set up the Google Developer group Buea to staff of the Department of Computer Science.

* Doing some research on calculating the bounding box volume of an object.

* Going through a little irssi-ssh tutorial.

August 2

* Correcting the rt_hrt_shot() function in src/librt/primitives/hrt/hrt.c

* Chatted with my mentor today : giving me recommendations for commit access.

* Working on a basic hrt/hrt.c

* Just passed the mid-term evaluations

=August 5th to August 9th=

August 5

* Correcting the bare bones [https://sourceforge.net/p/brlcad/patches/228/ patch].

* Building rt_hrt_prep() and rt_hrt_shot()

August 6

* My operating system crashed due to some accidental system file deletes.Fixing my system , created coding environment and did fresh svn checkouts.

* Worked on the logo for the [https://plus.google.com/100289274059280359416 GDG Buea] Google+ page.

* Did no coding work today.

August 7

* Wrote the rt_hrt_import() callback function for hrt.c.

* Uploaded hrt_import5 [https://sourceforge.net/p/brlcad/patches/230/ patch] to sourceforge.net.

* A picture for the rt_hrt_import5 test on mged interface can be viewed [http://brlcad.org/~Izak/Import_test.png here]. 

* Wrote the rt_hrt_export() callback function for hrt.c.

* uploaded hrt_export5 [https://sourceforge.net/p/brlcad/patches/229/ patch] to sourceforge.net.
 
* A picture for the rt_hrt_export5 test on archer interface can be viewed [http://brlcad.org/~Izak/Export_test.png here].

August 8

* Have been granted commit access. :)

* Learned how to use svn commit, svn revert, etc.

* Ensured consistent bu_log("rt_hrt_xxx: not implemented yet!\n"); in calllbacks functions for hrt.c and committed to [http://sourceforge.net/p/brlcad/code/56694/ r56694].

=August 12th to August 17th=

August 12th

* Added hrt_invsq vector and hrt_invRSSR matrix to the heart structure in [https://sourceforge.net/p/brlcad/code/56745/ r56745].

* Added rt_hrt_print() routine and removed rt_hrt_??port4() routines pertaining to version 4 of database in [https://sourceforge.net/p/brlcad/code/56746/ r56745].

* Added rt_hrt_import5() routine to import the database format to the internal format in [https://sourceforge.net/p/brlcad/code/56747/ r56747].

* Added rt_hrt_export5() routine to export from internal format to database format in [https://sourceforge.net/p/brlcad/code/56751/ r56751]

August 13th

* Went to the Cameroon GCE Board office to apply for duplicate certificate for my younger sister.

* Wrote rt_hrt_describe() routine to present the heart solid in human-readable format and committed changes to [http://sourceforge.net/p/brlcad/code/56791/ r56791].

* Pictures to demonstrate the working rt_hrt_describe() function using the l command in the mged and archer interfaces can be viewed [http://brlcad.org/~Izak/rt_hrt_describe_mged.png here] and [http://brlcad.org/~Izak/rt_hrt_describe_archer.png here] respectively.

August 14th

* Working on rt_hrt_prep() routine but electric blackouts in my area halted work.

August 15th

* Compiled hrt.c after writing rt_hrt_prep(). This routine calls rt_hrt_bbox() routine  (which I am still to work on ) and some testing using the rt command. Will commit [http://paste.kde.org/p20fbe4c6/ rt_hrt_prep()] later.

* Worked on rt_hrt_ifree() to free the storage associated with the rt_db_internal version of this solid and commited to [https://sourceforge.net/p/brlcad/code/56876/ r56876].

August 16th

* Working on rt_hrt_bbox() routine which needs some testing before I commit.

August 17th

* Finished working on rt_hrt_bbox() routine today. Used the bb command to test this code in the [http://brlcad.org/~Izak/rt_hrt_bbox_mged_test.png mged] and [http://brlcad.org/~Izak/rt_hrt_bbox_archer_test.png archer].

* Committed changes in rt_hrt_bbox() and rt_hrt_prep() routines to [http://sourceforge.net/p/brlcad/code/56917/ r56917].Will do more work on rt_hrt_prep() function eventually.

=August 19th to August 24th=

August 19th

* Corrected spelling of polynomial in bn_poly_synthetic_div.c in [http://sourceforge.net/p/brlcad/code/56944 r56944].

* Wrote the rt_hrt_free() and rt_hrt_params() functions in [http://sourceforge.net/p/brlcad/code/56947/ r56947]. 

* Still working on rt_hrt_prep().

August 20th

* Modified rt_hrt_prep() function and commited it to [https://sourceforge.net/p/brlcad/code/57004/ r57004].

August 21st

* Working on rt_hrt_shot(). Still to commit.

* Modified comment to add new constant in rt_hrt_prep() in [http://sourceforge.net/p/brlcad/code/57023/ r57023] and [http://sourceforge.net/p/brlcad/code/57035/ r57035].

August 22nd

* Modifying a comment by punctuating the word primitive in super ellipsoid primitive and commited to [http://sourceforge.net/p/brlcad/code/57058/ r57058].

* Understanding how to write the rt_???_shot() function for primitives.

* Adding rt_hrt_shot to intersect a ray with the heart in [http://sourceforge.net/p/brlcad/code/57068/ r57068].

* Tests in the mged using the 'rt' command givers this [http://brlcad.org/~Izak/rt_shot_test.png result].

August 23rd

* Removed unused variable polycurve and fixed function declarations in pc header
and committed to [http://sourceforge.net/p/brlcad/code/57097/ r57097].

* Added rt_hrt_norm() function which Computes the normal to the heart given a point on the heart in [http://sourceforge.net/p/brlcad/code/57100/ r57100].

=August 26th to August 31st=

August 26th

* Experiencing an infection in my left eye so could not work throughout the weekend until today.Couldn't work with one eye.

August 27th

* Researching on solving sextic equations. Found an interesting paper by Titus Piezas III.

* Correcting sextic equation in comment preceeding rt_hrt_shot() implementation in [http://sourceforge.net/p/brlcad/code/57180/ r57180].

August 28th

* Reading papers by Piezas and Thomas Hagerdon to come out with algorithm to write bn_poly_sextic_roots.c.

August 29th - 30th

* Consulting mathematician Titius Piezas for advice on how to solve the sextic equation for rt_hrt_shot() to do ray tracing. Piezas says the equation is solvable using numerical solutions with arbitrary accuracy but is not solvable with respect to radicals in Galois theory.

August 31st

* Researching on root-finding algorithms which can be used to write bn_poly_sextic_roots.c

* Working on rt_hrt_plot to plot the heart.

=September 2nd to September 7th=

September 5th

* Working on roots_example.c to incorporate test for sextic equation.


September 6th

* Changed 4 to BN_MAX_POLY_DEGREE in roots_example.c to avoid any further confusions in [http://sourceforge.net/p/brlcad/code/57469 r57469]. roots_example.c actually solves a sextic equation now.

* Solved the implicit heart equation with x=y=z in order to substitute into the rt_hrt_shot sextic equation and use in roots_example.c

* Running rt command on a hrt object. Picture can be viewed [http://brlcad.org/~Izak/heart.png here].

September 7th

* Produced a [http://brlcad.org/~Izak/Movie.odp slideshow] from images produced after running the 'rt' command on a heart object.

=September 9th to September 14th=

September 9th

* Getting my feet wet with plotting in the mged/archer interface :)

September 10th

* Fixed the orientation of the heart and invalid implicit equation in rt_hrt_shot() in [http://sourceforge.net/p/brlcad/code/57533/ r57533].

* Getting better results from rt_hrt_shot in this [http://brlcad.org/~Izak/Heart.mpg Heart movie].

* Observing the rt_ell_plot() functions to see how the rt_hrt_plot() can be written.

September 14th

* Corrected rt_hrt_bbox() by Stretching the xdir vector to accommodate the heart and rt_hrt_norm() by Correcting Z component of the normal vector (partials of sextic equation) in [http://sourceforge.net/p/brlcad/code/57653/ r57553].

=September 16th to September 21st=

September 16th

* Had an entretien with my University's  Vice- Chancellor and dean of Faculty of Engineering today talking about Summer of Code and approaching Doc Camp .

* Wrote a private helper function rt_hrt_24pts() for rt_hrt_plot(). Have written code to get 2 iso-contours. Still working on some bugs in archer.

September 17th

* Following the stack trace which Sean opened my eyes to on IRC.

September 18th

* Fixed the bumpy areas on the heart by correcting some code in rt_hrt_norm() in [http://sourceforge.net/p/brlcad/code/57728/ r57728].

September 20th

* Corrected the rt_hrt_norm() function so that the default trace shouldn't be doing from high specular to dark shadows in [http://sourceforge.net/p/brlcad/code/57780/ r57780].


=GSoC 2013 summary=

For the past quarter, I've been implementing a heart primitive for the BRL-CAD package. This project focused on writing and testing callback functions in the ray tracing library for the aforementioned primitive.You are invited to read my diary on http://brlcad.org/wiki/User:Izak/GSOC_2013_logs.

Despite the challenges I encountered such as the lack of Internet connectivity for over 5 weeks, before the mid-term evaluation period, I hooked the heart primitive into the BRL-CAD source by adding a magic number for the heart in include/magic.h and src/libbu/magic.c, stubbing an empty heart in include/db5.h, include/rtgeom.h, include/raytrace.h,src/librt/db5_types.c,src/librt/primitives/table.c and src/librt/primitives/hrt/hrt.c as well as adding typing support for the heart in the mged interface in include/wdb.h,src/libwdb/wdb.c and src/libged/typein.c.

After the mid-term evaluations,I implemented ray tracing callback functions for serialization (rt_hrt_??port), textual description (rt_hrt_describe, rt_hrt_print) and ray tracing (rt_hrt_prep, rt_hrt_shot and rt_hrt_norm).I also wrote a test to ensure that BRL-CAD's root solver is stable for sextic equations and after consulting some mathematicians, I learned that the heart's sextic equation cannot be solved in radicals -- A pointer to which method does not work :). Feel free to download a heart animation from http://brlcad.org/~Izak/HeartImages/Heart.mpg.You can also look at images of the heart from 360 different angles using http://brlcad.org/~Izak/HeartImages/

As GSoC 2013 comes to an end, my passion to continuously contribute to the open source community grows. I intend to finish the callbacks functions for the heart primitive and hook the heart to the mged and archer interfaces so the heart gets into the next BRL-CAD release :)

Feeling Great!!