Editing User:Popescu.andrei1991/proposal2014

===Bio===

I’m Andrei, a CS undergraduate at Polytechnic Univ. of Bucharest, current in the 4th and last year.When I’m not coding, I’m playing basketball, going to the gym or just hanging out. I’ve been with BRL-CAD for GSoC 2012 and Code-in ’13. In my opinion, those projects offer me a much better view on this and how I should tackle situation, it’s been a great learning experience.

In the past two years, I’ve been working(mostly open source) as well as improved my CS knowledge all around. While I’m not an avid CAD user and there’s no secret behind this, I do like the software development aspects of BRL-CAD(on short, I find writing code for CAD applications interesting as it involves several areas like math, os, oop etc) and the community which, even if small, it’s enthusiastic and willing to help.

Regarding my proposal, I’ll avoid ‘advertising talk’ and be as honest and upfront as I can. Also, I was rather short on the Bio as I believe it’s no point reiterating known data all over again.

E-mail: popescu.andrei1991@gmail.com

Full name: Popescu Andrei-Constantin

Timezone: UTC +2:00

Communication availability: IRC/Mail/Skype/phone, anything will do

==Project abstract==

Implementing a geometry engine from scratch involves a tremendous amount of work. BRL-CAD's geometry kernel relies on the already existing implementation that's found in the BRL-CAD binaries. After doing some research through code, IRC and commit logs, my understanding is that  the existing code is written in 'OOP C' except for Nurbs which are already written as OOP C++.

BRL-CAD's engine(core interface) already has several primitives implemented, as well as database handling. My whole GSoC project is split into two main parts. The main part is completing the primitives list, Geometry engine tuning is something to be discussed and there's no certain plan towards it, I will work on it only if the community decides so.

===I) Geometry engine tuning===

Right now, this is a generic part and there's no technical planning on it.

===II) Enhancing geometry engine with additional primitives===

With the increasing number of implemented primitives in core interface, increases the usability and external development interest towards the geometry engine. Primitives where chosen based on how important they are and how difficult it is to implement them. The goal is to tackle as many primitives as possible, starting with the easiest ones. Some items from the list are rec, rcc, ellg, sph etc.

Project details & deliverables

 

I already have commit access, a somewhat decent understanding of BRL-CAD concepts and where to look in the source code. This allows me to skip the ‘obtaining commit access’ step.

==I) Geometry engine(core interface) tuning==

Additional actions will be taken to facilitate API usage for applications, I don't have a view on what type of applications use it and what environment it is usually used under. This is a generic(currently unknown) part of my proposal. It depends on what the 'easy-to-deploy' definition    the mentor/community have. This part should be finished before coding starts, or at worst a couple of weeks into coding, if exceptional circumstances occur.

Deliverables: Undefined

==II) Enhancing geometry engine with additional primitives==

 

=General OOP design aspects=

All primitive classes will only inherit Object, regardless of similarities between one another. For example, sph will not inherit anything from ell although sph is a  form of ell with additional constraints.

The class design will be decided based on community feedback because, in my opinion, I lack the experience to take the decision by myself, you can, however, see my intended approach . Only after the class interface(actually, abstract class, as C++ does not have an interface keyword) has been sketched will I begin implementing it. This will be done in an overlapping manner, testing class1 and designing class2 will take place in the same period of time, to avoid coding downtime.

 

=Approach & Implementation plan=

A general, natural approach is to take the structure members and convert them to class members and the functions to methods. Obviously this will not be a 1:1 transformation in all cases and code refactoring will happen on the OOP end to avoid duplicated code, breaking OOP principles. On short, the idea is to do cleanup when designing the class, so we respect hacking as well as keep the code quality as high as possible.

Obviously, fields & constructors will be implemented first, then pairing each method with a test, so I don't end up with a period when I have to do only testing. Also, if I am stuck on a method, I could switch to testing an already implemented one. I can't write this on the timeline since I don't know the exact days, but the 'testing' period at the end of each class is not meant to happen all after the class is fully written. Another positive aspect of this idea is that it will keep me from burning out or getting bored/frustrated with issues, since I can bounce around to different types of activities.

=Primitives=

Each of the below mentioned primitives exists in librt, has a well defined behavior and structure. The idea is to adapt that behavior to a class, taking the OOP concepts into consideration. Additionally, some primitives have a more generic version already implemented (rcc has tgc and sph has ell) so I will use that as a starting point.

The complete list, in chronological order is this :  rcc,rec , ellg, sph, sketch, vol, ars, extrude, bot, pipe and hrt.

If possible, the list will be discussed in the review period and changed according to how the implementation is going and of mentors' view upon it.

1)      rcc (right circular cylinder)

Rcc is a primitive that can be used to draw wheels, rods, posts. It is, in fact, a special case of tgc and as such it's class design will mimic the tgc  with respect to the additional constraints. The main reason rcc is the first one to be implemented is to practice class design on it.

Deliverables

- fully functional rcc class with behavior similar to librt one

-tests(probably unit tests) for it

 

2)      rec( righ elliptical cylinder)

Similar to rcc, rec is a special case of tgc.

Deliverables

-fully functional rec class with behavior similar to librt one

-tests(probably unit tests) for it

 

3)      ellg

special case of ellipsoid, similar to sph it will mimic Ellipsoid implementation.

 

Deliverables

-fully functional ellg class with behavior similar to librt one

-tests(probably unit tests) for it

 

4)      sph (optional, depending on progress)

similar to rcc – tgc situation, sph is, in fact, a special case of ell.

Deliverables

-fully functional rcc class, with behavior similar to librt one

-tests(probably unit tests) for it

 

5)        sketch

2D outline

Deliverables

-fully functional sketch class, with behavior similar to librt one

-tests(probably unit tests) for it

 

6)      vol

A voxel represents a value on a regular grid in three-dimensional space. Voxel is a combination of "volume" and "pixel" where pixel is a combination of "picture" and "element" (Wikipedia)

 

Deliverables

Functional voxelize algorithm

tests(probably unit tests) for it, perhaps other testing (i.e. profiling)

 

7)      extrude

extrude face distance mged command; uses arb data, implementation might differ from others.

Deliverables

-Extrude implementation

-Tests

 

8)      bot (bag of triangles)l

 

According to BRL-CAD wiki, The “Bag o’ Triangles” is a CAD primitive object used for representing triangle mesh objects. BoT objects may be surfaces or solids, topologically closed or open, clockwise or counter clockwise.

Deliverables

-fully functional bot class, with behavior similar to librt one

-tests(probably unit tests) for it

 

9)      pipe

An interesting example of a pipe usage is generating a coil. I consider that this primitive can be more challenging, so it has been added after two were already implemented. Based on that, I should have a better understanding of the process, as well as class design experience.

Deliverables

-fully functional pipe class, with behavior similar to librt one

-tests(probably unit tests) for it

 

10)  ars (arbitrary rectangular solid)

I decided to implement this primitive because, to me, it seems a very usable primitive(because of the waterlines), it can be easily shaped into many complicated forms. Having arb8 already implemented, I have an example of a  non-curvature shape primitive.

Deliverables

-fully functional ars class, with behavior similar to librt one

-tests(probably unit tests) for it

 

As you know, GSoC is flexible regarding project scope. If this proposed project is under scoped, we will discuss additional classes to implement. Similarly, if things take longer than expected due to unforeseeable factors, primitives will be prioritized. If finished early, hrt primitive will be implemented.

===Time availability & timeline===

There will be work done between 21 March and 21 April, however, not 40 hours a week. This will be discussed in detail via IRC/mails. The timeline assumes zero work is done until then.  During coding period, the standard 40 hours will be maintained, with the possibility to extend to 48 if there is need.

Each interval  is to be read like this: [Start, finish)

21st  April –28th  April

Discuss rec and rcc class design, begin basic class implementation

28th  April – 5th  May

Finish rec and rcc implementation; cleanup; testing; sph   and ellg design discussion;

5th  May – 12th  May

Sph & ellg implementation; cleanup; doc/testing;

12th  May – 19th  May

Univ Tests period,  sketch design discussions. (probably 15-20h) basic sketch implementation;

19th May  - 26th  May

Sketch implementation;

26th of May -  2nd June

Sketch cleanup/testing;  vol implementation; extrude discussion

2nd June – 9th June

Extrude implementation

9th June – 16th June

Extrude cleanup/testing/doc; discussion of bot primitive;

16th June – 23rd June

Bot implementation;

23rd June – 30th June

Mid term; break; bot implementation; Limited availability (10 – 20 hours)

30th June -  7th July

Bot cleanup/testing; pipe discussion; sketching class, writing constructors.

7th July – 14th of July

Pipe implementation;

7th July – 14th of July

finishing pipe implementation; pipe cleaup/testing;  ars class discussion

14th of July – 21st July

Ars implementation;

21st of July – 28th  July

Finish ars implementation; class testing and cleanup.

1st of August – 11th August

Finishing ars class(testing & cleanup), hrt design discussion

11th – 18th of August

Hrt implementation; clean up, writing doc, testing

The timeline will be adjusted upon discussions with mentors and based on progress.


Motivation



===Why me?===

You know a bit more about me than about newcomers so this question my seem useless. My impression is that  over time I’ve gotten the reputation of an underachiever as I always start out strong and fall of some time after.  It’s happened with GCI 2014, last part of 2013 and a part of GSoC 2012.

Being honest, I think the best way to figure out if you should pick me or not(aside the proposal, obviously) is to look at how the period until taking decisions is spent. I can’t guarantee that I won’t “fall off again”, but this time I am much more determined, as you will see below.

          I’ve improved my general CS knowledge considerably from ago two years, that project was much more for me, than for the real benefit of BRL-CAD. I want to change that now,  I want this GSoC project to actually make a difference. So I/you could show the difference between the two projects. Actually, now, I am a bit surprised that I was accepted back then, but nevertheless that lead to this.

          Previously, I applied with two proposals, but not this year. My goal is not only to get accepted (as it was) but do this project, this is what I want to do and nothing else. If I don’t get selected, that’s alright, it can happen, but I want to work on this project and none other. I’m saying this because it’s a project that I find extremely interesting for many reasons: making the transition from procedural to OOP, designing classes when you don’t know the exact, full usage of your class, shaping geometry entities into objects.

 

===Why BRL-CAD?===



Initially, I tried other orgs because I was pursuing a C++ project that involved compilers aswell( like llvm, lttng, gcc etc) so that’s why I arrived a bit late around here.

As I am not an CAD expert (or avid user, even) I didn’t want to stay here just cause it’s easier to get accepted(because I know the process, what I have to do etc)

So far, I’ve just said why not BRL-CAD.  My opinion is that CAD software is one of the toughest categories of software there is, while I’m not  attracted that much to using it, I find it’s structure, constraints and general concepts extremely interesting. I simply like how it works more than what it does.

Another reason for this, except of the project(which I mentioned I’m interested in probably around 7 times) is the community. For such a small organization,  there’s so much drive in  the community (GCI, GSoC etc),  I got to know you folks and it would really be awesome to continue working with you.

All in all, I believe this project would be a meaningful progress from my first contact with BRL-CAD.

This is a long shot, but I’d love taking part as a GSoC mentor on the follow-up of this project next year.