User:Ksuzee/Reports

GSoC 2012[edit]

0 week[edit]

  • 2/05/2012 - installing Ubuntu-12.04, XChat
  • 4-5/05/2012 - downloading sources, successful building with CMake
  • 8-9/05/2012 - making folder which contains the information about duplications in every folder of /trunk/src
  • 12/05/2012 - csh script for finding duplications
  • 15/05/2012 - patch r50549 for adrt/isst_tcltk.c
  • 16-18/05/2012 - patches:
    • /fb/orle-fb.c
    • /util/picbackgnd.c
    • /libbu/htonf.c

1 week[edit]

    • start fixing duplications, which are situated in different folders
    • patch /libbu/convert.c for check
    • patch /util/lowp.c for check
    • patch /rt/viewarea.c for check
    • getting familiar with Astyle

Also I continue to check folders which contain duplications in one file.

There're folders: util, vfont, tclscripts, sig, shapes, rtthem, remrt, proc-fb, nirt, libwdb, libtermio, libsysw, librtserver. All these directories are checked. They either have no duplications in one file which should be reducted or reductions are put to patch tracker for check. I'm working on directories: tab, rt. mged, libtclcad, librt

2 week[edit]

  • 28/05
    • correction to patches: /fb/orle-fb.c and /util/picbackgnd.c (testing)
    • working at duplications in /mged/points/process.c
  • 29/05
    • there's a huge duplication in rt/worker.c. I'm working on it
    • checking some more directories (will write the result later)
  • 30/05
    • checking some more directories (will write the result later)
    • leave worker.c for discuss (ready, but not tested yet)
  • 31/05
    • correction the util/lowp.c patch
    • checking some more directories
  • 1/06
    • all the directories are checked for duplications in one file
  • 2/06
    • preparing the summary about duplications

tab/tabinterp.c - functions step_interpolate and linear_interpolate -- the bodies're different but part which contains "for", "while" and "if" can be put in common static inline function.

/rt/worker.c - there're two huge parts in function "void do_pixel" in "begin unroll"-"end unroll" and "begin non-ubrolled"-"end non-unrolled". However, you told it problem file, so I'll wait your comment here.

/mged/cmd.c - functions "int cmd_ged_edit_wrapper" and "int cmd_ged_simulate_wrapper". The only ddifference is value of av[1]. Both these functions are used in setup.c, so it's better to use static inline function too. I suggest to make one more variable for parameter of argv[]

/libtclcad/tclcadobj.c - 1) functions "HIDDEN int to_mouse_move_arb_edge", "HIDDEN int to_mouse_move_arb_face" and "HIDDEN int to_mouse_move_pipept". The difference's in: av[0] = "move_arb_face"; - to_mouse_move_arb_face av[0] = "move_arb_edge"; - to_mouse_move_arb_edge av[0] = "move_pipept"; - to_mouse_move_pipept

and ret = ged_move_arb_edge(gedp, 5, (const char **)av); ret = ged_move_arb_face(gedp, 5, (const char **)av); ret = ged_move_pipept(gedp, 5, (const char **)av);

So these functions could call another static function which'd have all the body and get char * parameter for av[0] and functional type for ret. 2) functions "HIDDEN int to_poly_ell_mode" and "HIDDEN int to_poly_circ_mode". Differnce's in consts - gdvp->gdv_view->gv_mode = TCLCAD_POLY_ELLIPSE_MODE; and gdvp->gdv_view->gv_mode = TCLCAD_POLY_CIRCLE_MODE; so necessary const could be got by common function (type - ged_view, if I'm not mistaken). Also difference is in bu_vls_printf, but type char* can be transmit too.

/librt/primitives/nmg/nmg_rt_segs.c - functions "HIDDEN int state5" and "HIDDEN int state6". It'd be easy to reduct, because difference's only in ret_val (in two situations at the end of functions) which is INT. So I'd be necessary only to transmit ret_val1 and ret_val2.

/libpc/pcParameter.cpp - methods Point::Point(VCSet & vcs, std::string n, void *ptr) and Vector::Vector(VCSet & vcs, std::string n, void *ptr): the blocks in if (ptr) {...} are the same, so this block can be put in other function.

/liboptical/sh_camo.c - functions HIDDEN int marble_setup and HIDDEN int camo_setup. The difference is in bu_log (just static comment) and in memcpy.

/libbn/plot.c - functions void pd_3space and void pd_3line. I made static inline function pd_3 which gets the same parameters as those two functions + char l. Both functions call pd_3 with l == 'W' for pd3_space and l == 'V' for pd_3line. Making was successful.

/fbserv/server.c - void fb_server_fb_scursor and void fb_server_fb_cursor. Difference is: (void)pkg_plong(&rbuf[0], fb_cursor(fb_server_fbp, mode, x, y)); and (void)pkg_plong(&rbuf[0], fb_scursor(fb_server_fbp, mode, x, y)); So common function can get just: struct pkg_conn *pcp, char *buf + functional type

/fb/pl-fb.c - int GetDCoords(coords *coop) and int Get3DCoords(coords *coop). Difference is only here: if (debug) {fprintf..}. So text for fprintf can be transmited like a char * in common function.

3 week[edit]

  • 4/06 - getting familiar with unit tests
  • 5/06 - cheking some more directories for duplications
  • 6/06 - CMakeFiles and Makefile
  • 7/06
    • patch for src/util - files util.c and util.h.
    • util_yuv is almost ready (something need to be checked)
  • 8/06
    • working with util_yuv (ready)
    • come back to firt patch (ready *need to send patch)
  • 9/06
    • /mged/cmd.c is refactored
    • work with /libtclcad/tclcadobj.c. Have some problems with functional type
    • /fb/pl-fb.c is refactored. Static inline function is added. Making and running are successful

4 week[edit]

  • 11/06
    • further checking for duplications in one directory, different files
  • 12/06
    • the same checking. Hope to finish it by today's evening
  • 13/06
    • sent all prepared patches,
    • did some making and running of refactored functions to be sure in right result.
  • 14/06
    • /librt/primitives/nmg/nmg_rt_segs.c is refactored
    • some more checking
  • 15/06
    • checking for copy-pastes in 1 dir - different files is completed! The count of such places -- 14, +2 are already patched
  • 16/06
    • getting familiar with u-f.c, d-i.c etc. Understanding how they work.

5 week[edit]

  • 18/06
    • reduction in sig/d-i.c and ../f-i.c. Patch's added
  • 19-20/06
    • reduction in libged/view_obj.c and ../vutil.c. 2 functions're put in util.c
    • reduction in libdm. There're quite enough dups, so need a bit more time to finish
  • 21/06
    • reduction in libdm is finished
  • 23/06
    • find a bit more in libdm, add it

6 week[edit]

  • 25/06
    • getting familiar with g-nff, g-obj, g-xxx_facets
  • 26/06
    • reduction in src/conv for g-nff, g-obj and g-xxx_facets is done
    • made small man pages for src/sig: f-i, d-i, u-f, i-f
  • 27/06
    • made man pages for src/sig: a-d, bw-d, d2-c, d-a, d-bw, d-u, f-d, u-bw, u-d
  • 28-29/06
    • check duplications in different folders. Most dups've already been found. Hope to finish by tomorrow evening and make a whole report by them
  • 30/06
    • all the duplicaions in differesnt foldres are checked. There're about 35 such situations. Some of them are a bit disputed and needed to be discussed.

7 week[edit]

  • 02/06
    • worked with libged/ps.c and png.c but unsuccessful. They couldn't be reducted
  • 03-04/06
    • looked through left TODOs. Tomorrow will finish it and reduct.

TODO: to correct existing patches a bit

  • 05/06
    • did some reduction in

/liboptical/sh_camo.c and /tclcad/tclcad_obj.c (thanks to ``Erik). Will patch them in a few days because of some problems with my laptop

8 week[edit]

  • 09-10/07
    • added patch for /liboptical/sh_camo.c
    • submitted my Student Midterm Evaluation
    • checked some previous patches
    • work on reduction in sig/umod.c and sig/imod.c. It must be the last reduction for 1 directiory - many files
  • 14/07
    • spent some time reading HACKING file

During the first part of GSoC program I:

1. Found, reducted (where it was possible) and patched all the duplications which are contained in ONE (the same) file

2. Found, reducted (where it was possible) and patched all (except one) the duplications which are contained in different files, but in one directory. Usually I added 2 new files - util.c and util.h, which contained the duplicated code. I need to add some necessary comments to the new files.

3. Created some small manual pages for some programs in src/sig. Will commit them after the getting commit access.

4. Found all the duplications which are contained in different directories and have a full list of necessary reductions.

9 week[edit]

  • 16/07
    • working on headers from some previous patches
  • 18/07
    • updated patches for src/util
  • 21-22/07
    • updated patches for other duplications in 1 directiory - different files

10 week[edit]

  • 26/07
    • updated patches for src/conv
    • added patch for src/librt/primitives/nmg/nmg_rt_segs.c
  • 27/07
    • found several editing methods for duplicate code in different folders
    • trying to reduct code in different folders
  • 28/07
    • updated patch for src/fb/pl-fb.c
    • updated patches for src/libdm
    • closed unnecessary patch for src/libdm
    • checking other patches
  • 29/07
    • updated two patches for src/sig
    • updated two patches for src/utils
    • added comments for patches on patches tracker where it was necessary

11 week[edit]

  • 30/07
    • fixed error at patch for src/libdm
    • reducted patch for fb/pl-fb.c
    • added some screenshots for patches
  • 31/07
    • continue working with clip.c.in libbn
  • 1/08
    • some work on previous patches
  • 2-3/08
    • clip.c.in libbn is ready. Now there're 3 functions, commmon for libdm and libged

12 week[edit]

  • 6/08
    • made one more reduction in libbn. Now there're files track_reg.c and track_reg.h. They have common funtions for libged/track.c and libwdb/reg.c
  • 8/08
    • refactoring in libicv and util. The same as previous
  • 9/08
    • refactoring in fb and libfb. Tha same as previous
  • 10/08
    • some more reductions in previous situations for good patches. Almost everything I supposed to do during GSoC is ready
  • 12/08
    • added 2 more prepared patches

13 week[edit]

  • work on cleaning and reviewing the patches