Difference between revisions of "Google Summer of Code/2008"

(Parametric Equations and Constraint Support)
m
 
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
After a detailed [[Google_Summer_of_Code/Proposal_Evaluation|evaluation and review]] period, we requested and were approved to mentor four students for the 2008 Google Summer of Code.  Our students were selected from among nearly two dozen applicants based on their potential as a new long-term developer, their ability to communicate effectively, the quality of their project proposal, their technical ability, and our ability to effectively mentor them.
+
{|align="right"
 +
|[[Image:brlcad_gsoc2008_flyer.jpg|thumb|left|256px]]
 +
|}
 +
 
 +
After a detailed [[Summer_of_Code/Proposal_Evaluation|evaluation and review]] period, we requested and were approved to mentor four students for the 2008 Google Summer of Code.  Our students were selected from among nearly two dozen applicants based on their potential as a new long-term developer, their ability to communicate effectively, the quality of their project proposal, their technical ability, and our ability to effectively mentor them.
  
 
= Student selections =
 
= Student selections =
Line 17: Line 21:
 
:Mentored by Erik Greenwald, André's project involves implementing a new global illumination renderer using BRL-CAD's existing LIBRT ray-trace library.  This rendering technique provides highly realistic image synthesis (pretty pictures!) through a variant of the Monte-carlo method and bidirectional path tracing.  This will make it much easier to generate beautiful detailed renderings of any BRL-CAD geometry without requiring polygonal tessellation.
 
:Mentored by Erik Greenwald, André's project involves implementing a new global illumination renderer using BRL-CAD's existing LIBRT ray-trace library.  This rendering technique provides highly realistic image synthesis (pretty pictures!) through a variant of the Monte-carlo method and bidirectional path tracing.  This will make it much easier to generate beautiful detailed renderings of any BRL-CAD geometry without requiring polygonal tessellation.
 
:*Design document for [[Metropolis Light Transport]]
 
:*Design document for [[Metropolis Light Transport]]
 +
:*Development blog at http://andrecastelo.wordpress.com
  
 
==Dawn Thomas==
 
==Dawn Thomas==
Line 24: Line 29:
 
:*Design document for [[Libpg_:_A_parametrics/constraint_library|Libpg]]
 
:*Design document for [[Libpg_:_A_parametrics/constraint_library|Libpg]]
 
:*Development Log : [http://parametrics.wordpress.com/ Parametrics]
 
:*Development Log : [http://parametrics.wordpress.com/ Parametrics]
 +
:*"Developer" Log : [http://www.ohloh.net/accounts/dawn/messages.rss] ( Mostly "pertinent" updates to what the developer is upto )
  
 
==Manuel Antonio Fernandez Montecelo==
 
==Manuel Antonio Fernandez Montecelo==
Line 35: Line 41:
 
= Getting started =
 
= Getting started =
  
Students participating with BRL-CAD in the 2008 GSoC have a '''[[Google_Summer_of_Code/Checklist|checklist]]''' of actions to attend to before getting started on their projects.  They are also expected to be aware of what is '''[[Google_Summer_of_Code/Expectations|expected of them]]''' throughout the summer.  
+
Students participating with BRL-CAD in the 2008 GSoC have a '''[[Summer_of_Code/Checklist|checklist]]''' of actions to attend to before getting started on their projects.  They are also expected to be aware of what is '''[[Summer_of_Code/Expectations|expected of them]]''' throughout the summer.  
  
 
= Additional Information =
 
= Additional Information =
Line 41: Line 47:
 
This year, more than 7000 applications were received from nearly 4000 students for the 175 participating organizations.  Of those, only 1125 applications/students will be funded.  Altogether, this represents a $5.6 million dollar (USD) investment by Google in open source software development.  Way cool.
 
This year, more than 7000 applications were received from nearly 4000 students for the 175 participating organizations.  Of those, only 1125 applications/students will be funded.  Altogether, this represents a $5.6 million dollar (USD) investment by Google in open source software development.  Way cool.
  
You can see our [[Google_Summer_of_Code/Project_Ideas|Project Ideas]] page for a list of project suggestions that were suggested to be of particular interest to our mentors for 2008.  There were several [http://brlcad.org/~sean/ideas.html other areas] of development that are of high-interest as well.  Students were welcome to submit their own unique ideas as well and were encouraged to collaborate with our mentors on formulating those projects.  Student applications for GSoC 2008 were accepted on Google's project website between March 24 and March 31 at http://code.google.com/soc/2008/
+
You can see our [[Google_Summer_of_Code/2008/Project_Ideas|Project Ideas]] page for a list of project suggestions that were suggested to be of particular interest to our mentors for 2008.  There were several [http://brlcad.org/~sean/ideas.html other areas] of development that are of high-interest as well.  Students were welcome to submit their own unique ideas as well and were encouraged to collaborate with our mentors on formulating those projects.  Student applications for GSoC 2008 were accepted on Google's project website between March 24 and March 31 at http://code.google.com/soc/2008/
 +
[[Category: Summer of Code]]

Latest revision as of 19:02, 29 June 2011

Brlcad gsoc2008 flyer.jpg

After a detailed evaluation and review period, we requested and were approved to mentor four students for the 2008 Google Summer of Code. Our students were selected from among nearly two dozen applicants based on their potential as a new long-term developer, their ability to communicate effectively, the quality of their project proposal, their technical ability, and our ability to effectively mentor them.

Student selections[edit]

It was a competitive selection process with several great applicants that had to be turned away but in the end, our four selections were made. Thanks go out to all of our applicants, and I hope to see many of them stay involved in BRL-CAD development regardless of GSoC. That's one of the many perks of being an open source project -- the door is always open for new contributors. Thanks are also deserved to all our available mentors and backup mentors that did a great job of weighing the pros and cons of each proposal, interacting with the candidates, making the difficult decisions, and ultimately choosing an exciting mix of students and projects for GSoC 2008. That said and without further adieu, I'm happy to announce our four selected students and their accepted projects:

Timothy Van Ruitenbeek[edit]

Implementing Solid of Revolution and Sweep Primitives[edit]

Mentored by Daniel Roßberg, Timothy's project aims to implement two primitives that have been requested numerous times over the years: sweep and revolve. These two primitives provide a wide range of modeling benefits including the ability to express various complex shapes more intuitively and easily. Such shapes that will become readily possible to construct include lathe shapes, cables, blends, carved shapes, and much more.

André Castelo Branco Gomes[edit]

Global Illumination Renderer using Metropolis Light Transport and LIBRT[edit]

Mentored by Erik Greenwald, André's project involves implementing a new global illumination renderer using BRL-CAD's existing LIBRT ray-trace library. This rendering technique provides highly realistic image synthesis (pretty pictures!) through a variant of the Monte-carlo method and bidirectional path tracing. This will make it much easier to generate beautiful detailed renderings of any BRL-CAD geometry without requiring polygonal tessellation.

Dawn Thomas[edit]

Parametric Equations and Constraint Support[edit]

Mentored by John Anderson, Dawn's project is a highly ambitious effort that aims to provide constraints and parametric equation support for BRL-CAD geometry. Parametric constraints allows geometry to be described in very powerful and expressive ways including constructing geometry that preserves tangency, stays aligned through complex transformations, maintains relative dimensions, resolves dependent articulations, and more.
  • Design document for Libpg
  • Development Log : Parametrics
  • "Developer" Log : [1] ( Mostly "pertinent" updates to what the developer is upto )

Manuel Antonio Fernandez Montecelo[edit]

New GUI Framework for Modeling and Visualization[edit]

Mentored by Bob Parker, Manuel's project is the start of a new graphical user interface (GUI) for visualizing, manipulating, and managing BRL-CAD geometry. This interface serves as a solid framework for improving BRL-CAD's usability by providing support for shaded displays, scene graph management, and more. This thin client is the start of a new user interface that will focus on usability, efficiency, scalability, and the human-computer interaction.

Getting started[edit]

Students participating with BRL-CAD in the 2008 GSoC have a checklist of actions to attend to before getting started on their projects. They are also expected to be aware of what is expected of them throughout the summer.

Additional Information[edit]

This year, more than 7000 applications were received from nearly 4000 students for the 175 participating organizations. Of those, only 1125 applications/students will be funded. Altogether, this represents a $5.6 million dollar (USD) investment by Google in open source software development. Way cool.

You can see our Project Ideas page for a list of project suggestions that were suggested to be of particular interest to our mentors for 2008. There were several other areas of development that are of high-interest as well. Students were welcome to submit their own unique ideas as well and were encouraged to collaborate with our mentors on formulating those projects. Student applications for GSoC 2008 were accepted on Google's project website between March 24 and March 31 at http://code.google.com/soc/2008/