Menu
Logged-In As
ACCOUNTNot Logged In
Model a toy car with wheels and axles in BRL-CADBRL-CAD
Status: ClosedTime to complete:
72 hrs
Mentors: Sean
This task involves modeling a toy car in BRL-CAD. The toy car should be modeled in such a way that it can be printed using a 3d printer. The shape of toy car should be thought by keeping the word TOY in mind. As this shape would be 3d printed, all the axle and wheel arrangement should be done.
The output of this task would be a rendered image, and .g file of the toy car. If you wish to write a step by step tutorial of creating this model, search for it as another GCI task is there to write a tutorial.
References:
- Introduction to MGED at http://brlcad.org/wiki/Documentation
Uploaded Work
| File name/URL | File size | Date submitted | |
|---|---|---|---|
| TOY | 54.8 KB | November 21 2013 06:02 UTC | |
| Screens.zip | 835.1 KB | November 21 2013 06:03 UTC | |
| TOY new | 55.9 KB | November 21 2013 06:06 UTC | |
| no overlapps.g | 78.6 KB | November 21 2013 07:33 UTC | |
| NewTires.g | 112.0 KB | November 21 2013 13:09 UTC | |
| Screens (1).png | 430.9 KB | November 22 2013 12:43 UTC | |
| toycar.g | 5.0 KB | November 22 2013 12:43 UTC | |
| car.g | 49.1 KB | November 23 2013 01:43 UTC |
I would like to work on this task.
This task has been assigned to Charlie Dean. You have 72 hours to complete this task, good luck!
The claim on this task has been removed, someone else can claim it now.
I would like to work on this task.
The claim on this task has been removed, someone else can claim it now.
I want to do this .. I have aldreay done most of it
But my current task is been reviewed.
I would like to work on this task.
The claim on this task has been removed, someone else can claim it now.
I would like to work on this task.
This task has been assigned to Sharan. You have 72 hours to complete this task, good luck!
I have made it but it does not look good because of the word TOY in the car I will upload the work as soon as possible.
The work on this task is ready to be reviewed.
this has overlaps when doing rtcheck
So please give me suggestions to improve it more....
I also haven't joined the letters together, I was thinking of a plane but that would increase the overlaps...
I removed all the overlapps rtcheck isnt giving any overlapps now..
Any suggestions for joining the O in the toy with the T and Y
I just went to your site and found that MGED had a tire function built into into it
Sharan,
Really interesting interpretation of the task, creatinging a 'car' based on the letter 'T', 'O', and 'Y'. That's not what was intended at all, but it is interesting. The notion was to create something simple that looks like a toy car one might buy in a store.
Regardless of the interpretation, your model is not suitable for 3D printing and needs corrections. At a minimum, all of the body pieces must solidly connect with each other (except the axel, which should run throuh a hole in the body). If you're ambitious, I'd suggest starting over with the original idea in mind. Something like one of these:
http://www.google.com/search?q=simple+toy+cartbm=isch
One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work.
The work on this task is ready to be reviewed.
draw car.c axles.c wheels.c
it should do the trick, I did rtcheck it shows overlaps but it i cant remove it because it joins the wheels and axle together
The toycar.g file doesn't have a car.c, axles.c, or wheels.c in it. Are you sure you uploaded the right file?
One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work.
Uploading the right file now
The work on this task is ready to be reviewed.
Congratulations, this task has been completed successfully.
Sharan, that looks good, much better. That's something that can be 3D-printed. Are you interested in more modeling tasks? We may have more work like this if you're interested that we can create tasks for. I believe there are one or two others already, but more to come.
It would be awesome if you add more modelling tasks :-D
I was thinking of making the logo once in 3D again, iron man arc reactor is too compilcated and tough
I also did a followup on the sticker task i did, can you please check it..